World Library  
Flag as Inappropriate
Email this Article

General Conference on Weights and Measures

Article Id: WHEBN0000007339
Reproduction Date:

Title: General Conference on Weights and Measures  
Author: World Heritage Encyclopedia
Language: English
Subject: International System of Units, Litre, Weight, National Institute of Standards and Technology, SI base unit
Collection: Intergovernmental Organizations Established by Treaty, Standards Organizations
Publisher: World Heritage Encyclopedia

General Conference on Weights and Measures

For a topical guide to this subject, see Outline of the metric system.

The General Conference on Weights and Measures (Metre Convention (French: Convention du Mètre) to represent the interests of member states. The treaty, which also set up two further bodies, the International Committee for Weights and Measures (French: Comité international des poids et mesures- CIPM) and the International Bureau of Weights and Measures (French: Bureau international des poids et mesures - BIPM), was drawn up to coordinate international metrology and to coordinate the development of the metric system.

The conference meets in Sèvres (south-west of Paris) every four to six years. Initially it was only concerned with the kilogram and the metre, but in 1921 the scope of the treaty was extended to accommodate all physical measurements and hence all aspects of the metric system. In 1960 the 11th CGPM approved the Système International d'Unités, usually known as "SI".


  • Establishment 1
    • Membership criteria 1.1
  • CGPM meetings 2
  • See also 3
  • Notes 4
  • References 5


On 20 May 1875 an international treaty known as the Convention du Mètre (

  1. ^ "Convention du mètre" (in French).  
  2. ^ "The metre convention".  
  3. ^ "General Conference on Weights and Measures".  
  4. ^ "The BIPM headquarters".  
  5. ^ "General Conference on Weights and Measures". Bureau International des Poids et Mesures. 2011. Retrieved 30 September 2012. 
  6. ^ "Members of the International Committee for Weights and Measures (CIPM)". Bureau International des Poids et Mesures. October 2011. Retrieved 3 October 2012. 
  7. ^ "The Metre Convention". La métrologie française. 2012. Retrieved 3 October 2012. 
  8. ^ Quinn, Terry (2012). From Artefacts to Atoms: The Bipm and the Search for Ultimate Measurement Standard.  
  9. ^ "Member States and Associates". Bureau International des Poids et Mesures. 2013. Retrieved 20 October 2013. 
  10. ^ BIPM official site:Procedure for a State or Economy to become an Associate of the General Conference
  11. ^


  1. ^ As of 2012, the only "economy" that was an associate member was CARICOM (Caribbean Community) - its membership comprising Antigua and Barbuda, Saint Kitts and Nevis, Barbados, Saint Lucia, Belize, Saint Vincent and the Grenadines, Dominica, Suriname, Grenada, Trinidad and Tobago and Guyana. Jamaica, although also a member of CARICOM, is an associate of the CGPM in its own right.
  2. ^ In the case of France, the French Foreign Minister
  3. ^ Argentina, Austria-Hungary, Belgium, Brazil, Denmark, France, German Empire, Italy, Peru, Portugal, Russia, Spain, Sweden and Norway, Switzerland, Ottoman Empire, United States and Venezuela.


See also

1st (1889) The International Prototype Kilogram (IPK), a cylinder made of platinum-iridium and the International Prototype Metre, an X-cross-section bar also made from platinum-iridium were selected from batches manufactured by the British firm Johnson Matthey. Working copies of both artifacts were also selected by lot and other copies distributed to member nations, again by lot. The prototypes and working copies were deposited at the International Bureau of Weights and Measures (Bureau international des poids et mesures), Sèvres, France.
2nd (1897) No resolutions were passed by the 2nd CGPM.
3rd (1901) The litre was redefined as volume of 1 kg of water. Clarified that kilograms are units of mass, "standard weight" defined, standard acceleration of gravity defined endorsing use of grams force and making them well-defined.
4th (1907) The carat was defined as 200 mg.
5th (1913) The International Temperature Scale was proposed.
6th (1921) The Metre Convention revised.
7th (1927) The Consultative Committee for Electricity (CCE) created.
8th (1933) The need for absolute electrical unit identified.
9th (1948) The ampere, bar, coulomb, farad, henry, joule, newton, ohm, volt, watt, weber were defined. The degree Celsius was selected from three names in use as the name of the unit of temperature. The symbol l (lowercase L) was adopted as symbol for litre. Both the comma and dot on a line are accepted as decimal marker symbols. Symbols for the stere and second changed [1]. The universal return to the Long Scale numbering system was proposed but not adopted.
10th (1954) The kelvin, standard atmosphere defined. Work on the International System of Units (metre, kilogram, second, ampere, kelvin, candela) began.
11th (1960) The metre was redefined in terms of wavelengths of light. The Units hertz, lumen, lux, tesla were adopted. The new MKSA-based metric system given the official symbol SI for Système International d'Unités and launched as the "modernized metric system". The prefixes pico-, nano-, micro-, mega-, giga- and tera- were confirmed.
12th (1964) The original definition of litre = 1 dm3 restored. The prefixes atto- and femto- were adopted.
13th (1967) The second was redefined as duration of 9 192 631 770 periods of the radiation corresponding to the transition between the two hyperfine levels of the ground state of the caesium-133 atom at a temperature of 0 K. The Degree Kelvin renamed kelvin and the candela redefined.
14th (1971) A new SI base unit, the mole defined. The names pascal and siemens as units of pressure and electrical conductivity were approved.
15th (1975) The prefixes peta- and exa- were adopted. The units gray and becquerel were adopted as radiological units within SI.
16th (1979) The candela and sievert were defined. Both l and L provisionally allowed as symbols for litre.
17th (1983) The metre was redefined in terms of the speed of light.
18th (1987) Conventional values were adopted for Josephson constant, KJ, and von Klitzing constant, RK, preparing the way for alternative definitions of the ampere and kilogram.
19th (1991) New prefixes yocto-, zepto-, zetta- and yotta- were adopted.
20th (1995) The SI supplementary units (radian and steradian) become derived units.
21st (1999) A new SI derived unit, the katal = mole per second, was adopted as the SI unit of catalytic activity.
22nd (2003) A comma or a dot on a line are reaffirmed as decimal marker symbols, and not as grouping symbols in order to facilitate reading; "numbers may be divided in groups of three in order to facilitate reading; neither dots nor commas are ever inserted in the spaces between groups".[11]
23rd (2007) The definition of the kelvin was clarified and thoughts about possible revision of certain base units discussed.
24th (2011) Proposal to revise the definitions of the SI units, including redefining the kilogram in relation to the Planck constant were accepted in principle, subject to certain technical criteria having been met.

CGPM meetings

 Albania (2007)
 Bangladesh (2010)
 Belarus (2003)
 Bolivia (2008)
 Bosnia and Herzegovina (2011)
 Botswana (2012)
 Caribbean Community (2005)
 Chinese Taipei (2002)
 Costa Rica (2004)
 Cuba (2000)
 Ecuador (2000)
 Estonia (2005)
 Georgia (2008)
 Ghana (2009)
 Hong Kong (2000)
 Jamaica (2003)
 Latvia (2001)
 Lithuania (2001)
 Macedonia (2006)
 Malta (2001)
 Mauritius (2010)
 Mongolia (2013)
 Montenegro (2011)
 Namibia (2012)
 Oman (2012)
 Panama (2003)
 Paraguay (2009)
 Peru (2009)
 Philippines (2002)
 Moldova (2007)
 Seychelles (2010)
 Slovenia (2003)
 Sri Lanka (2007)
 Syria (2012)
 Ukraine (2002)
 Vietnam (2003)
 Zambia (2010)
 Zimbabwe (2010)

At its 21st meeting (October 1999), the CGPM created the category of "associate" for those states not yet members of the BIPM and for economic unions.[10]


  1. ^ Joined originally as Austria-Hungary
  2. ^ a b Joined originally as part of Czechoslovakia
  3. ^ a b Joined originally as part of Sweden and Norway
  4. ^ Joined originally as the Russian Empire
  5. ^ Joined originally as the Ottoman Empire


 Argentina (1877)
 Australia (1947)
 Austria (1875)[n1 1]
 Belgium (1875)
 Brazil (1921)
 Bulgaria (1911)
 Canada (1907)
 Chile (1908)
 China (1977)
 Colombia (2012)
 Croatia (2008)
 Czech Republic (1922)[n1 2]
 Denmark (1875)
 Dominican Republic (1954)
 Egypt (1962)
 Finland (1923)
 France (1875)
 Germany (1875)
 Greece (2001)
 Hungary (1925)
 India (1957)
 Indonesia (1960)
 Iran (1975)
 Ireland (1925)
 Israel (1985)
 Italy (1875)
 Japan (1885)
 Kazakhstan (2008)
 Kenya (2010)
 Malaysia (2001)
 Mexico (1890)
 Netherlands (1929)
 New Zealand (1991)
 Norway (1875)[n1 3]
 Pakistan (1973)
 Poland (1925)
 Portugal (1876)
 Romania (1884)
 Russia (1875)[n1 4]
 Saudi Arabia (2011)
 Serbia (2001)
 Singapore (1994)
 Slovakia (1922)[n1 2]
 South Africa (1964)
 South Korea (1959)
 Spain (1875)
 Sweden (1875)[n1 3]
 Switzerland (1875)
 Thailand (1912)
 Tunisia (2012)
 Turkey (1875)[n1 5]
 United Kingdom (1884)
 United States (1878)
 Uruguay (1908)
 Venezuela (1879)

Member States

Of the twenty countries that attended the Conference of the Metre in 1875, representatives of seventeen signed the convention on 20 May 1875.[Note 3] In April 1884 HJ Chaney, Warden of Standards in London unofficially contacted the BIPM inquiring whether the BIPM would calibrate some metre standards that had been manufactured in the United Kingdom. Broch, director of the BIPM replied that he was not authorised to perform any such calibrations for non-member states. On 17 September 1884, the British Government signed the convention on behalf of the United Kingdom.[8] This number grew to 21 in 1900, 32 in 1950, and 49 in 2001. As of 7 August 2013, there are 55 Member States and 38 Associate States and Economies of the General Conference (with year of partnership in parentheses):[9]

[7].Président de l'Académie des Sciences de Paris The opening session of each CGPM is chaired by the French foreign minister and subsequent sessions by the [6] though during both world wars, nations that were at war with France retained their membership of the CGPM.[5] it is implicit that member states must have diplomatic relations with France,[Note 2] that only wish to participate in the [Note 1] The CGPM recognises two classes of membership - full membership for those states that wish to participate in the activities of the BIPM and associate membership for those countries or economies

Membership criteria

The CGPM acts on behalf of the governments of its members. In so doing, it appoints members to the CIPM, receives reports from the CIPM which it passes on to the governments and national laboratories on member states, examines and where appropriate approves proposals from the CIPM in respect of changes to the International System of Units (SI), approves the budget for the BIPM (over €10 million in 2012) and it decides all major issues concerning the organization and development of the BIPM.[3][4]

  • Conférence générale des poids et mesures (CGPM), an intergovernmental conference of official delegates of member nations and the supreme authority for all actions;
  • Comité international des poids et mesures (CIPM), consisting of selected scientists and metrologists, which prepares and executes the decisions of the CGPM and is responsible for the supervision of the International Bureau of Weights and Measures;
  • Bureau international des poids et mesures (BIPM), a permanent laboratory and world centre of scientific metrology, the activities of which include the establishment of the basic standards and scales of the principal physical quantities and maintenance of the international prototype standards.


This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from World eBook Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.