List of International Organization for Standardization standards

This is a list of published^{[Note 1]} standards and other deliverables.^{[Note 2]} For a complete and up-to-date list of all the ISO standards, see the ISO catalogue.^[1]

The standards are protected by copyright and most of them must be purchased. However about 300 of the standards produced by ISO and IEC's Joint Technical Committee 1 (JTC1) have been made freely and publicly available.^[2]

ISO 1 – ISO 99

• ISO 1:2002 Geometrical Product Specifications (GPS) – Standard reference temperature for geometrical product specification and verification
• ISO 2:1973 Textiles – Designation of the direction of twist in yarns and related products
• ISO 3:1973 Preferred numbers – Series of preferred numbers
• ISO 4:1997 Information and documentation – Rules for the abbreviation of title words and titles of publications
• ISO 5 Photography and graphic technology – Density measurements
• ISO 6:1993 Photography – Black-and-white pictorial still camera negative film/process systems – Determination of ISO speed
• ISO 7 Pipe threads where pressure-tight joints are made on the threads
• ISO 8:1977 Documentation – Presentation of periodicals
• ISO 9:1995 Information and documentation – Transliteration of Cyrillic characters into Latin characters – Slavic and non-Slavic languages
• ISO 11:1987 Aircraft – Ground pressure testing connections for pressure cabins
• ISO 12:1987 Aerospace – Pipelines – Identification
• ISO 14:1982 Straight-sided splines for cylindrical shafts with internal centering – Dimensions, tolerances and verification
• ISO 15:2011 Radial bearings—Boundary dimensions, general plan
• ISO 16:1975 Acoustics – Standard tuning frequency (Standard musical pitch)
• ISO 17:1973 Guide to the use of preferred numbers and of series of preferred numbers
• ISO 18:1981 Documentation – Contents list of periodicals
• ISO 21:1985 Shipbuilding – Inland navigation – Cable-lifters for stud-link anchor chains
• ISO 22:1991 Belt drives – Flat transmission belts and corresponding pulleys – Dimensions and tolerances
• ISO 23:1993 Cinematography—Camera usage of 35 mm motion-picture film—Specifications
• ISO 25:1994 Cinematography—Camera usage of 16 mm motion-picture film—Specifications
• ISO 26:1993 Cinematography—Projector usage of 16 mm motion-picture films for direct front projection—Specifications
• ISO 28:1976 Cinematography—Camera usage of 8 mm Type R motion-picture film—Specifications
• ISO 29:1980 Cinematography—Projector usage of 8 mm Type R silent motion-picture film for direct front projection—Specifications [Withdrawn without replacement]
• ISO 31 Quantities and units [withdrawn: replaced with ISO/IEC 80000]
• ISO 32:1977 Gas cylinders for medical use—Marking for identification of content
• ISO 34
  • ISO 34-1:2010 Rubber, vulcanized or thermoplastic—Determination of tear strength—Part 1: Trouser, angle and crescent test pieces
  • ISO 34-2:2011 Rubber, vulcanized or thermoplastic—Determination of tear strength—Part 2: Small (Delft) test pieces
• ISO 35:2004 Natural rubber latex concentrate—Determination of mechanical stability
• ISO 36:2011 Rubber, vulcanized or thermoplastic—Determination of adhesion to textile fabrics
• ISO 37:2011 Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
• ISO 41:1980 Shipbuilding—Inland vessels—Covers for deck openings for pumps [withdrawn without replacement]
• ISO 43:1976 Aircraft—Jacking pads
• ISO 44:1975 Aerospace—Lever-operated, two-position, ON/OFF switches—Directions of operation
• ISO 45:1990 Aircraft—Pressure refuelling connections
• ISO 46:1973 Aircraft—Fuel nozzle grounding plugs and sockets
• ISO 48:2010 Rubber, vulcanized or thermoplastic—Determination of hardness (hardness between 10 IRHD and 100 IRHD)
• ISO 49:1994 Malleable cast iron fittings threaded to ISO 7-1
• ISO 50:1977 Metal pipes—Steel sockets screwed according to ISO 7 [Withdrawn without replacement]
• ISO 53:1998 Cylindrical gears for general and heavy engineering—Standard basic rack tooth profile
• ISO 54:1996 Cylindrical gears for general engineering and for heavy engineering—Modules
• ISO 55:1977 Seedlac—Specification [Withdrawn without replacement]
• ISO 57:1975 Bleached lac—Specification [Withdrawn without replacement]
• ISO 60:1977 Plastics—Determination of apparent density of material that can be poured from a specified funnel
• ISO 61:1976 Plastics—Determination of apparent density of moulding material that cannot be poured from a specified funnel
• ISO 62:2008 Plastics—Determination of water absorption
• ISO 63:1975 Flat transmission belts—Lengths [Withdrawn: Replaced with ISO 22]
• ISO 65:1981 Carbon steel tubes suitable for screwing in accordance with ISO 7-1
• ISO 67:1981 Muscovite mica blocks, thins and films—Grading by size [Withdrawn without replacement]
• ISO 68 ISO general-purpose screw threads – Basic profile
  • ISO 68-1:1998 Metric screw threads
  • ISO 68-2:1998 Inch screw threads
• ISO 69:1998 Cinematography—16 mm motion-picture and magnetic film—Cutting and perforating dimensions
• ISO 70:1981 Cinematography—35 mm negative photographic sound record on 35 mm motion-picture film—Position and maximum width dimensions
• ISO 71:1977 Cinematography—16 mm negative photographic sound record on 16 mm, 35/16 mm and 35/32 mm motion-picture film—Positions and dimensions
• ISO 74:1976 Cinematography—Image area produced by camera aperture and maximum projectable image area on 8 mm Type R motion-picture film—Positions and dimensions
• ISO 75 Plastics—Determination of temperature of deflection under load
  • ISO 75-1:2013 Plastics—Determination of temperature of deflection under load—Part 1: General test method
  • ISO 75-2:2013 Plastics—Determination of temperature of deflection under load—Part 2: Plastics and ebonite
  • ISO 75-3:2004 Plastics—Determination of temperature of deflection under load—Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
• ISO 76:2006 Rolling bearings—Static load ratings
• ISO 78 Chemistry — Layouts for standards
  • ISO 78-2:1999 Chemistry—Layouts for standards—Part 2: Methods of chemical analysis
  • ISO 78-3:1983 Chemistry—Layouts for standards—Part 3: Standard for molecular absorption spectrometry
  • ISO 78-4:1983 Layouts for standards—Part 4: Standard for atomic absorption spectrometric analysis
• ISO 82:1974 Steel—Tensile testing [Withdrawn: replaced with ISO 6892-1]
• ISO 83:1976 Steel—Charpy impact test (U-notch) [Withdrawn: replaced with ISO 148-1]
• ISO 86:1974 Steel—Tensile testing of sheet and strip less than 3 mm and not less than 0,5 mm thick [Withdrawn: replaced with ISO 6892-1]
• ISO 89:1974 Steel—Tensile testing of wire [Withdrawn: replaced with ISO 6892-1]
• ISO 90 Light gauge metal containers—Definitions and determination of dimensions and capacities
  • ISO 90-1:1997 Light gauge metal containers—Definitions and determination of dimensions and capacities—Part 1: Open-top cans
  • ISO 90-2:1997 Light gauge metal containers—Definitions and determination of dimensions and capacities—Part 2: General use containers
  • ISO 90-3:2000 Light gauge metal containers—Definitions and determination of dimensions and capacities—Part 3: Aerosol cans
• ISO 91 Petroleum measurement tables
  • ISO 91-1:1992 Petroleum measurement tables—Part 1: Tables based on reference temperatures of 15 degrees C and 60 degrees F
  • ISO 91-2:1991 Petroleum measurement tables—Part 2: Tables based on a reference temperature of 20 degrees C
• ISO 92:1976 Textile machinery and accessories—Spinning machinery—Definition of side (left or right)
• ISO 93 Textile machinery and accessories—Cylindrical sliver cans
  • ISO 93-1:2006 Textile machinery and accessories—Cylindrical sliver cans—Part 1: Main dimensions
  • ISO 93-2:2006 Textile machinery and accessories—Cylindrical sliver cans—Part 2: Spring bottoms
• ISO 94:1982 Textile machinery and accessories—Spindle gauges for ring-spinning and ring-doubling frames
• ISO 96 Textile machinery and accessories—Rings and travellers for ring spinning and ring twisting frames
  • ISO 96-1:2009 Textile machinery and accessories—Rings and travellers for ring spinning and ring twisting frames—Part 1: Flange rings T and SF and their travellers
  • ISO 96-2:2009 Textile machinery and accessories—Rings and travellers for ring spinning and ring twisting frames—Part 2: HZ- and J-rings and their travellers
• ISO 97:1975 Textile machinery and accessories—Rings for spinning, doubling and twisting for ear-shaped travellers
• ISO 98:2001 Textile machinery and accessories—Spinning preparatory and spinning machinery—Main dimensions of coverings for top rollers

ISO 100 – ISO 199

• ISO 100:1984 Pulleys for flat transmission belts—Crowns [Withdrawn: replaced with ISO 22]
• ISO 102:1990 Aircraft—Gravity filling orifices
• ISO 104:2002 Rolling bearings—Thrust bearings—Boundary dimensions, general plan
• ISO 105 Textiles — Tests for colour fastness
  • ISO 105-A01:2010 Part A01: General principles of testing
  • ISO 105-A02:1993 Part A02: Grey scale for assessing change in colour
  • ISO 105-A03:1993 Part A03: Grey scale for assessing staining
  • ISO 105-A04:1989 Part A04: Method for the instrumental assessment of the degree of staining of adjacent fabrics
  • ISO 105-A05:1996 Part A05: Instrumental assessment of change in colour for determination of grey scale rating
  • ISO 105-A06:1995 Part A06: Instrumental determination of 1/1 standard depth of colour
  • ISO 105-A08:2001 Part A08: Vocabulary used in colour measurement
  • ISO 105-A11:2012 Part A11: Determination of colour fastness grades by digital imaging techniques
  • ISO 105-B01:1994 Part B01: Colour fastness to light: Daylight
  • ISO 105-B02:2013 Part B02: Colour fastness to artificial light: Xenon arc fading lamp test
  • ISO 105-B03:1994 Part B03: Colour fastness to weathering: Outdoor exposure
  • ISO 105-B04:1994 Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test
  • ISO 105-B05:1993 Part B05: Detection and assessment of photochromism
  • ISO 105-B06:1998 Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test
  • ISO 105-B07:2009 Part B07: Colour fastness to light of textiles wetted with artificial perspiration
  • ISO 105-B08:1995 Part B08: Quality control of blue wool reference materials 1 to 7
  • ISO 105-B10:2011 Part B10: Artificial weathering—Exposure to filtered xenon-arc radiation
  • ISO 105-C06:2010 Part C06: Colour fastness to domestic and commercial laundering
  • ISO 105-C07:1999 Part C07: Colour fastness to wet scrubbing of pigment printed textiles
  • ISO 105-C08:2010 Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low-temperature bleach activator
  • ISO 105-C09:2001 Part C09: Colour fastness to domestic and commercial laundering—Oxidative bleach response using a non-phosphate reference detergent incorporating a low temperature bleach activator
  • ISO 105-C10:2006 Part C10: Colour fastness to washing with soap or soap and soda
  • ISO 105-C12:2004 Part C12: Colour fastness to industrial laundering
  • ISO 105-D01:2010 Part D01: Colour fastness to drycleaning using perchloroethylene solvent
  • ISO 105-D02:1993 Part D02: Colour fastness to rubbing: Organic solvents
  • ISO 105-E01:2013 Part E01: Colour fastness to water
  • ISO 105-E02:2013 Part E02: Colour fastness to sea water
  • ISO 105-E03:2010 Part E03: Colour fastness to chlorinated water (swimming-pool water)
  • ISO 105-E04:2013 Part E04: Colour fastness to perspiration
  • ISO 105-E05:2010 Part E05: Colour fastness to spotting: Acid
  • ISO 105-E06:2006 Part E06: Colour fastness to spotting: Alkali
  • ISO 105-E07:2010 Part E07: Colour fastness to spotting: Water
  • ISO 105-E08:1994 Part E08: Colour fastness to hot water
  • ISO 105-E09:2010 Part E09: Colour fastness to potting
  • ISO 105-E10:1994 Part E10: Colour fastness to decatizing
  • ISO 105-E11:1994 Part E11: Colour fastness to steaming
  • ISO 105-E12:2010 Part E12: Colour fastness to milling: Alkaline milling
  • ISO 105-E13:1994 Part E13: Colour fastness to acid-felting: Severe
  • ISO 105-E14:1994 Part E14: Colour fastness to acid-felting: Mild
  • ISO 105-E16:2006 Part E16: Colour fastness to water spotting on upholstery fabrics
  • ISO 105-F01:2001 Part F01: Specification for wool adjacent fabric
  • ISO 105-F02:2009 Part F02: Specification for cotton and viscose adjacent fabrics
  • ISO 105-F03:2001 Part F03: Specification for polyamide adjacent fabric
  • ISO 105-F04:2001 Part F04: Specification for polyester adjacent fabric
  • ISO 105-F05:2001 Part F05: Specification for acrylic adjacent fabric
  • ISO 105-F06:2000 Part F06: Specification for silk adjacent fabric
  • ISO 105-F07:2001 Part F07: Specification for secondary acetate adjacent fabric
  • ISO 105-F09:2009 Part F09: Specification for cotton rubbing cloth
  • ISO 105-F10:1989 Part F10: Specification for adjacent fabric: Multifibre
  • ISO 105-G01:1993 Part G01: Colour fastness to nitrogen oxides
  • ISO 105-G02:1993 Part G02: Colour fastness to burnt-gas fumes
  • ISO 105-G03:1993 Part G03: Colour fastness to ozone in the atmosphere
  • ISO 105-G04:1989 Part G04: Colour fastness to oxides of nitrogen in the atmosphere at high humidities
  • ISO 105-J01:1997 Part J01: General principles for measurement of surface colour
  • ISO 105-J02:1997 Part J02: Instrumental assessment of relative whiteness
  • ISO 105-J03:2009 Part J03: Calculation of colour differences
  • ISO 105-J05:2007 Part J05: Method for the instrumental assessment of the colour inconstancy of a specimen with change in illuminant (CMCCON02)
  • ISO 105-N01:1993 Part N01: Colour fastness to bleaching: Hypochlorite
  • ISO 105-N02:1993 Part N02: Colour fastness to bleaching: Peroxide
  • ISO 105-N03:1993 Part N03: Colour fastness to bleaching: Sodium chlorite (mild)
  • ISO 105-N04:1993 Part N04: Colour fastness to bleaching: Sodium chlorite (severe)
  • ISO 105-N05:1993 Part N05: Colour fastness to stoving
  • ISO 105-P01:1993 Part P01: Colour fastness to dry heat (excluding pressing)
  • ISO 105-P02:2002 Part P02: Colour fastness to pleating: Steam pleating
  • ISO 105-S01:1993 Part S01: Colour fastness to vulcanization: Hot air
  • ISO 105-S02:1993 Part S02: Colour fastness to vulcanization: Sulfur monochloride
  • ISO 105-S03:1993 Part S03: Colour fastness to vulcanization: Open steam
  • ISO 105-X01:1993 Part X01: Colour fastness to carbonizing: Aluminium chloride
  • ISO 105-X02:1993 Part X02: Colour fastness to carbonizing: Sulfuric acid
  • ISO 105-X04:1994 Part X04: Colour fastness to mercerizing
  • ISO 105-X05:1994 Part X05: Colour fastness to organic solvents
  • ISO 105-X06:1994 Part X06: Colour fastness to soda boiling
  • ISO 105-X07:1994 Part X07: Colour fastness to cross-dyeing: Wool
  • ISO 105-X08:1994 Part X08: Colour fastness to degumming
  • ISO 105-X09:1993 Part X09: Colour fastness to formaldehyde
  • ISO 105-X10:1993 Part X10: Assessment of migration of textile colours into polyvinyl chloride coatings
  • ISO 105-X11:1994 Part X11: Colour fastness to hot pressing
  • ISO 105-X12:2001 Part X12: Colour fastness to rubbing
  • ISO 105-X13:1994 Part X13: Colour fastness of wool dyes to processes using chemical means for creasing, pleating and setting
  • ISO 105-X14:1994 Part X14: Colour fastness to acid chlorination of wool: Sodium dichloroisocyanurate
  • ISO 105-X16:2001 Part X16: Colour fastness to rubbing—Small areas
  • ISO 105-X18:2007 Part X18: Assessment of the potential to phenolic yellowing of materials
  • ISO 105-Z01:1993 Part Z01: Colour fastness to metals in the dye-bath: Chromium salts
  • ISO 105-Z02:1993 Part Z02: Colour fastness to metals in the dye-bath: Iron and copper
  • ISO 105-Z03:1996 Part Z03: Intercompatibility of basic dyes for acrylic fibres
  • ISO 105-Z04:1995 Part Z04: Dispersibility of disperse dyes
  • ISO 105-Z05:1996 Part Z05: Determination of the dusting behaviour of dyes
  • ISO 105-Z06:1998 Part Z06: Evaluation of dye and pigment migration
  • ISO 105-Z07:1995 Part Z07: Determination of application solubility and solution stability of water-soluble dyes
  • ISO 105-Z08:1995 Part Z08: Determination of solubility and solution stability of reactive dyes in the presence of electrolytes
  • ISO 105-Z09:1995 Part Z09: Determination of cold water solubility of water-soluble dyes
  • ISO 105-Z10:1997 Part Z10: Determination of relative colour strength of dyes in solution
  • ISO 105-Z11:1998 Part Z11: Evaluation of speckiness of colorant dispersions
• ISO 108:1976 Textile machinery and accessories—Weaving looms—Definition of left and right sides
• ISO 109:1982 Textile machinery—Working widths of weaving machines
• ISO 110:1978 Textile machinery and accessories—Cones for yarn winding (cross wound) -- Half angle of the cone 9 degrees 15' [Withdrawn without replacement]
• ISO 111:1978 Textile machinery and accessories—Cones for yarn winding (cross wound) -- Half angle of the cone 4 degrees 20' [Withdrawn: Replaced with ISO 8489-3]
• ISO 112:1983 Textile machinery and accessories—Cones for yarn winding (cross wound) -- Half angle of the cone 3 degrees 30' [Withdrawn: Replaced with ISO 8489-2]
• ISO 113:2010 Rolling bearings—Plummer block housings—Boundary dimensions
• ISO 114:1980 99.8 Unalloyed magnesium ingots—Chemical composition [Withdrawn: Replaced by ISO 8287]
• ISO 115:2003 Unalloyed aluminium ingots for remelting—Classification and composition
• ISO 119:1977 Plastics—Phenol-formaldehyde mouldings—Determination of free phenols—Iodometric method
• ISO 120:1977 Plastics—Phenol-formaldehyde mouldings—Determination of free ammonia and ammonium compounds—Colorimetric comparison method
• ISO 121:1980 Magnesium-aluminium-zinc alloy ingots and alloy castings—Chemical composition and mechanical properties of sand cast reference test bars [Withdrawn: replaced by ISO 16220]
• ISO 123:2001 Rubber latex—Sampling
• ISO 124:2011 Latex, rubber—Determination of total solids content
• ISO 125:2011 Natural rubber latex concentrate—Determination of alkalinity
• ISO 126:2005 Natural rubber latex concentrate—Determination of dry rubber content
• ISO 127:2012 Rubber, natural latex concentrate—Determination of KOH number
• ISO 128 Technical drawings—General principles of presentation
• ISO 129
  • ISO 129-1:2004 Technical drawings—Indication of dimensions and tolerances—Part 1: General principles
  • ISO 129-4:2013 Technical product documentation (TPD) -- Indication of dimensions and tolerances—Part 4: Dimensioning of shipbuilding drawings
• ISO 131:1979 Acoustics—Expression of physical and subjective magnitudes of sound or noise in air [Withdrawn without replacement]
• ISO 132:2011 Rubber, vulcanized or thermoplastic—Determination of flex cracking and crack growth (De Mattia)
• ISO 133:1983 Rubber, vulcanized—Determination of crack growth (De Mattia) [Withdrawn: Replaced with ISO 132]
• ISO 136:1972 Steel—Simple torsion testing of wire [Withdrawn replaced by ISO 7800]
• ISO 137:1975 Wool—Determination of fibre diameter—Projection microscope method
• ISO 139:2005 Textiles—Standard atmospheres for conditioning and testing
• ISO 140 Acoustics—Measurement of sound insulation in buildings and of building elements
  • ISO 140-2:1991 Part 2: Determination, verification and application of precision data
  • ISO 140-4:1998 Part 4: Field measurements of airborne sound insulation between rooms
  • ISO 140-5:1998 Part 5: Field measurements of airborne sound insulation of façade elements and façades
  • ISO 140-7:1998 Part 7: Field measurements of impact sound insulation of floors
  • ISO 140-14:2004 Part 14: Guidelines for special situations in the field
  • ISO 140-18:2006 Part 18: Laboratory measurement of sound generated by rainfall on building elements
• ISO 141:1976 Textile machinery and accessories—Pirn winders and cross winders—Definition of left and right sides
• ISO 142:1976 Textile machinery and accessories—Weaving preparatory machines—Definition of left and right sides
• ISO 143:1977 Textile machinery and accessories—Weft pirns for automatic looms [Withdrawn without replacement]
• ISO 144:1973 Steel—Reverse bend testing of wire [Withdrawn: replaced with ISO 7801]
• ISO 146:1984 Metallic materials—Hardness test—Verification of Vickers hardness testing machines HV 0,2 to HV 100 [Withdrawn replaced with ISO 6507-2]
  • ISO 146-2:1993 Metallic materials—Verification of Vickers hardness testing machines—Part 2: Less than HV 0,2 [Withdrawn replaced with ISO 6507-2]
• ISO 148 Metallic materials—Charpy pendulum impact test
  • ISO 148-1:2009 Part 1: Test method
  • ISO 148-2:2008 Part 2: Verification of testing machines
  • ISO 148-3:2008 Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
• ISO 150:2006 Raw, refined and boiled linseed oil for paints and varnishes—Specifications and methods of test
• ISO 155:1998 Belt drives—Pulleys—Limiting values for adjustment of centres
• ISO 156:1982 Metallic materials—Hardness test—Verification of Brinell hardness testing machines [Withdrawn replaced by ISO 6506-2]
• ISO 157:1996 Coal—Determination of forms of sulfur
• ISO 160:1980 Asbestos-cement pressure pipes and joints [Withdrawn without replacement]
• ISO 161 Thermoplastics pipes for the conveyance of fluids—Nominal outside diameters and nominal pressures
  • ISO 161-1:1996 Part 1: Metric series
  • ISO 161-2:1996 Part 2: Inch-based series
• ISO 162:1985 Cinematography—Head gaps and sound records for three-, four-, or six-track magnetic sound records on 35 mm and single-track on 17,5 mm motion-picture film containing no picture—Positions and width dimensions
• ISO 171:1980 Plastics—Determination of bulk factor of moulding materials
• ISO 172:1978 Plastics—Phenol-formaldehyde mouldings—Detection of free ammonia
• ISO 174:1974 Plastics—Homopolymer and copolymer resins of vinyl chloride—Determination of viscosity number in dilute solution [Withdrawn replaced by ISO 1628-2]

ISO 200 – ISO 999

• ISO 216:2007 Writing paper and certain classes of printed matter – Trimmed sizes – A and B series, and indication of machine direction
• ISO 226:2003 Acoustics – Normal equal-loudness-level contours
• ISO 228 Pipe threads where pressure-tight joints are not made on the threads
• ISO 233 Information and documentation – Transliteration of Arabic characters into Latin characters^{[Note 3]}
• ISO 259 Information and documentation – Transliteration of Hebrew characters into Latin characters^{[Note 3]}
• ISO 261 ISO general purpose metric screw threads – General plan
• ISO 262 ISO general purpose metric screw threads – Selected sizes for screws, bolts and nuts
• ISO 286-1 Geometrical product specifications (GPS) – ISO code system for tolerances on linear sizes – Part 1: Basis of tolerances, deviations and fits
• ISO 286-2 Geometrical product specifications (GPS) – ISO code system for tolerances on linear sizes – Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
• ISO 361 Basic ionizing radiation symbol
• ISO 500 Agricultural tractors – Rear-mounted power take-off types 1, 2 and 3
• ISO 518:2006 Photography – Camera accessory shoes, with and without electrical contacts, for photoflash lamps and electronic photoflash units – Specification
• ISO 519:1992 Photography – Hand-held cameras – Flash-connector dimensions
• ISO 639 Codes for the representation of names of languages
  • ISO 639-1 Alpha-2 code
  • ISO 639-2 Alpha-3 code
  • ISO 639-3 Alpha-3 code for comprehensive coverage of languages
  • ISO 639-4 General principles of coding of the representation of names of languages and related entities, and application guidelines
  • ISO 639-5 Alpha-3 code for language families and groups
  • ISO 639-6 Alpha-4 code for comprehensive coverage of language variants
• ISO/IEC 646 Information technology – ISO 7-bit coded character set for information interchange
• ISO 657 Hot-rolled steel sections
• ISO 668 Series 1 freight containers – Classification, dimensions and ratings
• ISO 690 Information and documentation – Guidelines for bibliographic references and citations to information resources
• ISO 704 Terminology work – Principles and methods
• ISO 732 Photography – 120-size and 220-size films – Dimensions
• ISO 764 Horology – Magnetic resistant watches
• ISO 760:1978 Determination of water - Karl Fischer method (General method)
• ISO 787 General methods of test for pigments and extenders
  • ISO 787-9:1981 Determination of pH value of an aqueous suspension
• ISO 838 Paper – Holes for general filing purposes – Specifications
• ISO 843:1997 Information and documentation – Conversion of Greek characters into Latin characters
• ISO 860 Terminology work – Harmonization of concepts and terms
• ISO 898 Mechanical properties of fasteners made of carbon steel and alloy steel^{[Note 3]}
• ISO 965 ISO general purpose metric screw threads – Tolerances
• ISO 999 Information and documentation – Guidelines for the content, organization, and presentation of indexes

ISO 1000 – ISO 4999

• ISO 1000 SI units and recommendations for the use of their multiples and of certain other units [withdrawn 2009-11-17]
• ISO 1004 Information processing – Magnetic ink character recognition – Print specifications
• ISO 1007 Photography – 135-size film and magazine – Specifications
• ISO 1101 Geometrical Product Specifications (GPS) – Geometrical tolerancing – Tolerances of form, orientation, location and run-out
• ISO 1222 Photography – Tripod connections
• ISO 1268 Fibre-reinforced plastics – Methods of producing test plates
• ISO 1402 Rubber and plastics hoses and hose assemblies - Hydrostatic testing
• ISO/IEC 1539 Information technology – Programming languages – Fortran
• ISO 1629 Rubber and latices – Nomenclature
• ISO 1663 Rigid cellular plastics – Determination of water vapour transmission properties
• ISO 1745 Information processing – Basic mode control procedures for data communication systems
• ISO 1750 Pesticides and other agrochemicals – Common names
• ISO 1928 Solid mineral fuels – Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value
• ISO/IEC 2022 Information technology – Character code structure and extension techniques
• ISO 2108 Information and documentation – International standard book number (ISBN)
• ISO 2145 Documentation – Numbering of divisions and subdivisions in written documents
• ISO 2162 Technical product documentation – Springs
  • ISO 2162-1 Simplified representation
  • ISO 2162-2 Presentation of data for cylindrical helical compression springs
• ISO 2171 Cereals, pulses and by-products – Determination of ash yield by incineration
• ISO 2240:2003 Photography – Colour reversal camera films – Determination of ISO speed
• ISO 2533 Standard Atmosphere
• ISO 2692 Geometrical product specifications (GPS) – Geometrical tolerancing – Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
• ISO 2709 Information and documentation – Format for information exchange
• ISO 2768 General tolerances
  • ISO 2768-1 Tolerances for linear and angular dimensions without individual tolerance indications
  • ISO 2768-2 Geometrical tolerances for features without individual tolerance indications
• ISO 2852 Stainless steel clamp pipe couplings for the food industry
• ISO 3002 Basic quantities in cutting and grinding
• ISO 3082 Iron ores – Sampling and sample preparation procedures
• ISO 3098 Technical product documentation – Lettering
• ISO 3103 Tea – Preparation of liquor for use in sensory tests
• ISO 3166 Codes for the representation of names of countries and their subdivisions
  • ISO 3166-1 Country codes
  • ISO 3166-2 Country subdivision code
  • ISO 3166-3 Code for formerly used names of countries
• ISO 3297 Information and documentation – International standard serial number (ISSN)
• ISO 3394 Dimensions of rigid rectangular packages – Transport packages
• ISO 3506 Mechanical properties of corrosion-resistant stainless steel fasteners
• ISO 3534 Statistics – Vocabulary and symbols
  • ISO 3534-1 General statistical terms and terms used in probability
  • ISO 3534-2 Applied statistics
  • ISO 3534-3 Design of experiments
  • ISO 3534-4 Survey sampling
• ISO 3536 Road vehicles – Safety glazing materials – Vocabulary
• ISO 3537 Road vehicles – Safety glazing materials – Mechanical tests
• ISO 3538 Road vehicles – Safety glazing materials – Test methods for optical properties
• ISO 3601 Fluid power systems – O-rings
  • ISO 3601-1 Inside diameters, cross-sections, tolerances and designation codes
  • ISO 3601-2 Housing dimensions for general applications
  • ISO 3601-3 Quality acceptance criteria
  • ISO 3601-4 Anti-extrusion rings (back-up rings)
  • ISO 3601-5 Suitability of elastomeric materials for industrial applications
• ISO 3602 Documentation – Romanization of Japanese (kana script)
• ISO 3632 Spices – Saffron (Crocus sativus L.)^{[Note 3]}
• ISO 3635:1981 Size designation of clothes – Definitions and body measurement procedure
• ISO 3676 Packaging – Unit load sizes – Dimensions
• ISO 3864 Graphical symbols – Safety colours and safety signs
• ISO 3901 Information and documentation – International Standard Recording Code (ISRC)
• ISO 3977 Gas turbines – Procurement
• ISO 4074 Natural latex rubber condoms – Requirements and test methods
• ISO 4157 Construction drawings – Designation systems
• ISO 4165 Road vehicles — Electrical connections — Double-pole connection
• ISO 4179 Ductile iron pipes and fittings for pressure and non-pressure pipelines – Cement mortar lining
• ISO 4217 Codes for the representation of currencies and funds
• ISO 4314 Surface active agents — Determination of free alkalinity or free acidity — Titrimetric method
• ISO 4578 Adhesives — Determination of peel resistance of high-strength adhesive bonds — Floating-roller method
• ISO 4582 Plastics — Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources
• ISO 4587 Adhesives — Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
• ISO 4628 Paints and varnishes – Evaluation of degradation of coatings – Designation of quantity and size of defects, and of intensity of uniform changes in appearance
  • ISO 4628-1 General introduction and designation system
  • ISO 4628-2 Assessment of degree of blistering
  • ISO 4628-3 Assessment of degree of rusting
  • ISO 4628-4 Assessment of degree of cracking
  • ISO 4628-5 Assessment of degree of flaking
  • ISO 4628-6 Assessment of degree of chalking by tape method
  • ISO 4628-7 Assessment of degree of chalking by velvet method
  • ISO 4628-8 Assessment of degree of delamination and corrosion around a scribe
  • ISO 4628-10 Assessment of degree of filiform corrosion
• ISO/IEC 4873:1991 Information technology – ISO 8-bit code for information interchange – Structure and rules for implementation
• ISO 4892 Plastics – Methods of exposure to laboratory light sources

ISO 5000 – ISO 9999

• ISO 5127 Information and documentation – Vocabulary
• ISO 5167 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full
  • ISO 5167-1 General principles and requirements
  • ISO 5167-2 Orifice plates
  • ISO 5167-3 Nozzles and Venturi nozzles
  • ISO 5167-4 Venturi tubes
• ISO/IEC 5218 Information technology – Codes for the representation of human sexes
• ISO 5455 Technical drawings – Scales
• ISO 5457 Technical product documentation – Sizes and layout of drawing sheets
• ISO 5458 Geometrical Product Specifications (GPS) – Geometrical tolerancing – Positional tolerancing
• ISO 5459 Geometrical product specifications (GPS) – Geometrical tolerancing – Datums and datum systems
• ISO 5660 Reaction-to-fire tests – Heat release, smoke production and mass loss rate
  • ISO 5660-1 Heat release rate (cone calorimeter method)
  • ISO 5660-2 Smoke production rate (dynamic measurement)
  • ISO/TS 5660-3 Guidance on measurement
• ISO 5725 Accuracy (trueness and precision) of measurement methods and results
• ISO 5775 Bicycle tires and rims
• ISO 5776 Graphic technology - Symbols for text correction
• ISO 5800:2001 Photography – Colour negative films for still photography – Determination of ISO speed
• ISO 5893 Rubber and plastics test equipment – Tensile, flexural and compression types (constant rate of traverse) – Specification
• ISO 5964 Documentation – Guidelines for the establishment and development of multilingual thesauri
• ISO 5971:1981 Size designation of clothes – Pantyhose
• ISO 5993 Sodium hydroxide for industrial use—Determination of mercury content—Flameless atomic absorption spectrometric method
• ISO 6107-4:1993 Water quality—Vocabulary
• ISO 6166 Securities and related financial instruments – International securities identification numbering system (ISIN)
• ISO 6194 Rotary-shaft lip-type seals incorporating elastomeric sealing elements
  • ISO 6194-5 Identification of visual imperfections
• ISO 6336 Calculation of load capacity of spur and helical gears
• ISO 6344 Coated abrasives – Grain size analysis
• ISO 6357 Documentation – Spine titles on books and other publications
• ISO/IEC 6429 Information technology – Control functions for coded character sets
• ISO 6438 Documentation – African coded character set for bibliographic information interchange
• ISO/IEC 6523 Information technology – Structure for the identification of organizations and organization parts
• ISO 6579 Microbiology of food and animal feeding stuffs – Horizontal method for the detection of Salmonella spp.
• ISO 6594 Cast iron drainage pipes and fittings – Spigot series
• ISO 6709 Standard representation of geographic point location by coordinates
• ISO 6946 Building components and building elements – Thermal resistance and thermal transmittance – Calculation method
• ISO 7001 Graphical symbols – Public information symbols
• ISO 7002 Agricultural food products – Layout for a standard method of sampling from a lot
• ISO 7098 Information and documentation – Romanization of Chinese
• ISO 7200 Technical product documentation – Data fields in title blocks and document headers
• ISO 7240 Fire detection and alarm systems
• ISO 7372 Trade data interchange
• ISO/IEC 7498 Information technology -- Open Systems Interconnection—Basic Reference Model^{[Note 3]}
• ISO/IEC 7501 Identification cards – Machine readable travel documents
  • ISO/IEC 7501-1:2008 Machine readable passport
  • ISO/IEC 7501-2:1997 Machine readable visa
  • ISO/IEC 7501-3:2005 Machine readable official travel documents
• ISO 7736 Road vehicles – Car radio for front installation – Installation space including connections
• ISO/IEC 7810 Identification cards – Physical characteristics
• ISO/IEC 7811 Identification cards – Recording technique
• ISO/IEC 7812 Identification cards – Identification of issuers
• ISO/IEC 7813 Information technology – Identification cards – Financial transaction cards
• ISO/IEC 7816 Identification cards – Integrated circuit cards^{[Note 3]}
• ISO/IEC 7942 Information technology – Computer graphics and image processing – Graphical Kernel System (GKS)
• ISO 8000 Data quality
• ISO 8015:2011 Geometrical product specifications (GPS) – Fundamentals – Concepts, principles and rules
• ISO 8090 Cycles – Terminology
• ISO 8180 Ductile iron pipelines – Polyethylene sleeving for site application
• ISO 8373 Manipulating industrial robots – Vocabulary
• ISO 8501 Preparation of steel substrates before application of paints and related products – Visual assessment of surface cleanliness
• ISO 8559:1989 Garment construction and anthropometric surveys – Body dimensions
• ISO 8573 Compressed air
  • ISO 8573-1 Contaminants and purity classes
  • ISO 8573-2 Test methods for oil aerosol content
  • ISO 8573-3 Test methods for measurement of humidity
  • ISO 8573-4 Test methods for solid particle content
  • ISO 8573-5 Test methods for oil vapour and organic solvent content
  • ISO 8573-6 Test methods for gaseous contaminant content
  • ISO 8573-7 Test method for viable microbiological contaminant content
  • ISO 8573-8 Test methods for solid particle content by mass concentration
  • ISO 8573-9 Test methods for liquid water content
• ISO 8583 Financial transaction card originated messages – Interchange message specifications
  • ISO 8583-1 Messages, data elements and code values
  • ISO 8583-2 Application and registration procedures for Institution Identification Codes (IIC)
  • ISO 8583-3 Maintenance procedures for messages, data elements and code values
• ISO 8601 Data elements and interchange formats – Information interchange – Representation of dates and times
• ISO/IEC 8613 Information technology – Open Document Architecture (ODA) and interchange format
• ISO/IEC 8632 Information technology – Computer graphics – Metafile for the storage and transfer of picture description information
  • ISO/IEC 8632-1 Functional specification
  • ISO/IEC 8632-2 Character encoding
  • ISO/IEC 8632-3 Binary encoding [withdrawn 2001-06-21]
  • ISO/IEC 8632-4 Clear text encoding
• ISO 8651 Information technology – Computer graphics – Graphical Kernel System (GKS) language bindings^{[Note 3]}
• ISO/IEC 8652 Information technology – Programming languages – Ada
• ISO 8653:1986 Jewellery – Ring-sizes – Definition, measurement and designation
• ISO 8691 Petroleum products – Low levels of vanadium in liquid fuels – Determination by flameless atomic absorption spectrometry after ashing
• ISO 8805 Information processing systems – Computer graphics – Graphical Kernel System for Three Dimensions (GKS-3D) functional description
• ISO/IEEC 8806 Information technology – Computer graphics – Graphical Kernel System for Three Dimensions (GKS-3D) language bindings
  • ISO/IEEC 8806-4 C
• ISO 8807 Information processing systems – Open Systems Interconnection – LOTOS – A formal description technique based on the temporal ordering of observational behaviour
• ISO/IEC 8824 Information technology – Abstract Syntax Notation One (ASN.1)
• ISO/IEC 8825 Information technology – ASN.1 encoding rules
• ISO/IEC 8859 Information technology – 8-bit single-byte coded graphic character sets
  • ISO/IEC 8859-1 Latin alphabet No. 1
  • ISO/IEC 8859-2 Latin alphabet No. 2
  • ISO/IEC 8859-3 Latin alphabet No. 3
  • ISO/IEC 8859-4 Latin alphabet No. 4
  • ISO/IEC 8859-5 Latin/Cyrillic alphabet
  • ISO/IEC 8859-6 Latin/Arabic alphabet
  • ISO/IEC 8859-7 Latin/Greek alphabet
  • ISO/IEC 8859-8 Latin/Hebrew alphabet
  • ISO/IEC 8859-9 Latin alphabet No. 5
  • ISO/IEC 8859-10 Latin alphabet No. 6
  • ISO/IEC 8859-11 Latin/Thai alphabet
  • ISO/IEC 8859-13 Latin alphabet No. 7
  • ISO/IEC 8859-14 Latin alphabet No. 8 (Celtic)
  • ISO/IEC 8859-15 Latin alphabet No. 9
  • ISO/IEC 8859-16 Latin alphabet No. 10
• ISO 8879 Information processing – Text and office systems – Standard Generalized Markup Language (SGML)
• ISO 9000 Quality management systems – Fundamentals and vocabulary
• ISO 9001 Quality management systems – Requirements
• ISO 9004 Managing for the sustained success of an organization – A quality management approach
• ISO 9050 Glass in building – Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factors
• ISO 9069 Information processing – SGML support facilities – SGML Document Interchange Format (SDIF)
• ISO/IEC 9075 Information technology – Database languages – SQL
• ISO/IEC 9126 Software engineering – Product quality
• ISO 9141 Road vehicles – Diagnostic systems^{[Note 3]}
  • ISO 9141-2 CARB requirements for interchange of digital information
  • ISO 9141-3 Verification of the communication between vehicle and OBD II scan tool
• ISO 9241 Ergonomics of human-system interaction
• ISO/IEC 9293 Information technology – Volume and file structure of disk cartridges for information interchange
• ISO 9362 Banking – Banking telecommunication messages – Business identifier code (BIC)
• ISO 9407 Shoe sizes – Mondopoint system of sizing and marking
• ISO/IEC 9541 Information technology – Font information interchange
  • ISO/IEC 9541-1:1991 Architecture
  • ISO/IEC 9541-2:1991 Interchange Format
  • ISO/IEC 9541-3:1994 Glyph shape representation
  • ISO/IEC 9541-4:2009 Harmonization to Open Font Format
• ISO 9564 Financial services – Personal Identification Number (PIN) management and security^{[Note 3]}
• ISO/IEC 9579 Information technology – Remote database access for SQL with security enhancement
• ISO/IEC 9592 Information technology – Computer graphics and image processing – Programmer's Hierarchical Interactive Graphics System (PHIGS)
• ISO/IEC 9593 Information technology – Computer graphics – Programmer's Hierarchical Interactive Graphics System (PHIGS) language bindings^{[Note 3]}
• ISO/IEC 9594 Information technology – Open Systems Interconnection – The Directory
• ISO/IEC 9636 Information technology - Computer graphics - Interfacing techniques for dialogues with graphical devices (CGI) - Functional specification
  • ISO/IEC 9636-1 Overview, profiles, and conformance
  • ISO/IEC 9636-2 Control
  • ISO/IEC 9636-3 Output
  • ISO/IEC 9636-4 Segments
  • ISO/IEC 9636-5 Input and echoing
  • ISO/IEC 9636-6 Raster
• ISO 9660 Information processing – Volume and file structure of CD-ROM for information interchange
• ISO 9712 Non-destructive testing - Qualification and certification of NDT personnel
• ISO/IEC 9796 Information technology – Security techniques – Digital signature schemes giving message recovery
• ISO/IEC 9797 Information technology – Security techniques – Message Authentication Codes (MACs)
  • ISO/IEC 9797-1 Mechanisms using a block cipher
  • ISO/IEC 9797-2 Mechanisms using a dedicated hash-function
• ISO/IEC 9798 Information technology – Security techniques – Entity authentication
• ISO/IEC 9834 Information technology – Open Systems Interconnection – Procedures for the operation of OSI Registration Authorities
• ISO 9869 Thermal insulation – Building elements – In-situ measurements of thermal resistance and thermal transmittance
• ISO/IEC 9899 Programming languages – C
• ISO/IEC/IEEE 9945 Information technology – Portable Operating System Interface (POSIX®) Base Specifications, Issue 7
• Latin characters
• ISO 9985 Information and documentation – Transliteration of Armenian characters into Latin characters
• ISO 9992 Financial transaction cards – Messages between the integrated circuit card and the card accepting device
• ISO/IEC 9995 Information technology – Keyboard layouts for text and office systems
• ISO 9999 Assistive products for persons with disability – Classification and terminology

ISO 10000 – ISO 14999

• ISO 10001:2007 Quality management – Customer satisfaction – Guidelines for codes of conduct for organizations
• ISO 10002:2014 Quality management – Customer satisfaction – Guidelines for complaints handling in organizations
• ISO 10003:2007 Quality management – Customer satisfaction – Guidelines for dispute resolution external to organizations
• ISO 10004:2008 Quality management – Customer satisfaction – Guidelines for monitoring and measuring
• ISO 10005:2005 Quality management systems – Guidelines for quality plans
• ISO 10006:2003 Quality management systems – Guidelines for quality management in projects
• ISO 10007:2003 Quality management systems – Guidelines for configuration management
• ISO 10012:2003 Measurement management systems – Requirements for measurement processes and measuring equipment
• ISO/TR 10013:2001 Guidelines for quality management system documentation
• ISO 10014:2006 Quality management – Guidelines for realizing financial and economic benefits
• ISO 10015:1999 Quality management – Guidelines for training
• ISO/TR 10017:2003 Guidance on statistical techniques for ISO 9001:2000
• ISO 10018:2012 Quality management – Guidelines on people involvement and competence
• ISO 10019:2005 Guidelines for the selection of quality management system consultants and use of their services
• ISO/IEC 10021 Information technology – Message Handling Systems (MHS)
• ISO/IEC 10026 Information technology – Open Systems Interconnection
• ISO 10077 Thermal performance of windows, doors and shutters – Calculation of thermal transmittance
• ISO/IEC 10089 Information technology – 130 mm rewritable optical disk cartridge for information interchange
• ISO/IEC 10116 Information technology – Security techniques – Modes of operation for an n-bit block cipher
• ISO/IEC 10118 Information technology – Security techniques – Hash-functions
• ISO 10160 Information and documentation – Open Systems Interconnection – Interlibrary Loan Application Service Definition
• ISO 10161 Information and documentation – Open Systems Interconnection – Interlibrary Loan Application Protocol Specification
• ISO/IEC 10164 Information technology – Open Systems Interconnection – Systems Management
• ISO/IEC 10179:1996 Information technology – Processing languages – Document Style Semantics and Specification Language (DSSSL)
• ISO/IEC 10206 Information technology – Programming languages – Extended Pascal
• ISO 10211 Thermal bridges in building construction – Heat flows and surface temperatures – Detailed calculations
• ISO 10218 Robots and robotic devices – Safety requirements for industrial robots
• ISO/IEC 10279 Information technology – Programming languages – Full BASIC
• ISO 10303 Industrial automation systems and integration – Product data representation and exchange
• ISO 10380 Pipework — Corrugated metal hoses and hose assemblies
• ISO 10383 Securities and related financial instruments – Codes for exchanges and market identification (MIC)
• ISO 10456 Building materials and products – Hygrothermal properties – Tabulated design values and procedures for determining declared and design thermal values
• ISO 10487 Passenger cars – Connections for car radios^{[Note 3]}
• ISO 10555 Sterile, single-use intravascular catheters
• ISO 10579 Geometrical product specifications (GPS) – Dimensioning and tolerancing – Non-rigid parts
• ISO 10628 Flow diagrams for process plants
• ISO/IEC 10646 Information technology – Universal Coded Character Set (UCS)
• ISO 10664 Hexalobular internal driving feature for bolts and screws – Torx screw head
• ISO/IEC 10746 Information technology - Open distributed processing
  • ISO/IEC 10746-1 Information technology - Open Distributed Processing - Reference model: Overview
  • ISO/IEC 10746-2 Information technology - Open distributed processing - Reference model: Foundations
  • ISO/IEC 10746-3 Information technology - Open distributed processing - Reference model: Architecture
  • ISO/IEC 10746-4 Information technology - Open Distributed Processing - Reference Model: Architectural semantics
• ISO 10957 Information and documentation – International standard music number (ISMN)
• ISO 10962 Securities and related financial instruments – Classification of Financial Instruments (CFI code)
• ISO 10993 Biological evaluation of medical devices
• ISO 11064 Ergonomic design of control centres
  • ISO 11064-1:2000 Principles for the design of control centres
  • ISO 11064-2:2000 Principles for the arrangement of control suites
  • ISO 11064-3:1999 Control room layout ISO 11064-3:1999/Cor 1:2002
  • ISO 11064-4:2004 Layout and dimensions of workstations
  • ISO 11064-5:2008 Displays and controls
  • ISO 11064-6:2005 Environmental requirements for control centres
  • ISO 11064-7:2006 Principles for the evaluation of control centres
• ISO 11120 Gas cylinders—Refillable seamless steel tubes for compressed gas transport, of water capacity between 150 l and 3000 l -- Design construction and testing
• ISO 11135:2014 Sterilization of health-care products—Ethylene oxide—Requirements for the development, validation and routine control of a sterilization process for medical devices
• ISO 11137 Sterilization of health care products – Radiation
• ISO 11170:2003 Hydraulic fluid power – Filter elements – Sequence of tests for verifying performance characteristics
• ISO 11171:2010 Hydraulic fluid power – Calibration of automatic particle counters for liquids
• ISO/IEC 11172 Information technology – Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s
• ISO/IEC 11179 Information technology – Metadata registries (MDR)
• ISO 11357 Plastics – Differential scanning calorimetry (DSC)
  • ISO 11357-1:2009 General principles
  • ISO 11357-2:2013 Determination of glass transition temperature and glass transition step height
  • ISO 11357-3:2011 Determination of temperature and enthalpy of melting and crystallization
  • ISO 11357-4:2005 Determination of specific heat capacity
  • ISO 11357-5:2013 Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
  • ISO 11357-6:2008 Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
  • ISO 11357-7:2002 Determination of crystallization kinetics
• ISO/IEC 11404 Information technology – General-Purpose Datatypes (GPD)
• ISO 11446:2004 Road vehicles – Connectors for the electrical connection of towing and towed vehicles – 13-pole connectors for vehicles with 12 V nominal supply voltage
• ISO 11469:2000 Plastics – Generic identification and marking of plastics products
• ISO/IEC 11578:1996 Information technology – Open Systems Interconnection – Remote procedure call (RPC)
• ISO 11783 Tractors and machinery for agriculture and forestry – Serial control and communications data network
• ISO/IEC 11801 Information technology – Generic cabling for customer premises
• ISO 11898 Road vehicles – Controller area network (CAN)
• ISO 12006 Building construction – Organization of information about construction works
• ISO/IEC 12207 Systems and software engineering – Software life cycle processes
• ISO 12100 Safety of machinery – General principles for design – Risk assessment and risk reduction
• ISO 12639 Graphic technology – Prepress digital data exchange – Tag image file format for image technology (TIFF/IT)
• ISO 12641 Graphic technology – Prepress digital data exchange – Colour targets for input scanner calibration
• ISO/TS 12805:2011 Nanotechnologies – Materials specifications – Guidance on specifying nano-objects
• ISO 12859/TR Intelligent transport systems – System architecture – Privacy aspects in ITS standards and systems
• ISO 12944 Paints and varnishes – Corrosion protection of steel structures by protective paint systems
• ISO 13007 Ceramic tiles – Grouts and adhesives
  • ISO 13007-1:2014 Terms, definitions and specifications for adhesives
  • ISO 13007-2:2010 Test methods for adhesives
  • ISO 13007-3:2010 Terms, definitions and specifications for grouts
  • ISO 13007-4:2013 Test methods for grouts
• ISO/TR 13121:2011 Nanotechnologies – Nanomaterial risk evaluation
• ISO 13239 Information technology – Telecommunications and information exchange between systems – High-level data link control (HDLC) procedures
• ISO/IEC 13249 Information technology – Database languages – SQL multimedia and application
• ISO/IEC 13250 Information technology – Topic Maps^{[Note 3]}
• ISO 13320:2009 Particle size analysis - Laser diffraction methods
• ISO/IEC 13346 Information technology – Volume and file structure of write-once and rewritable media using non-sequential recording for information interchange
• ISO 13370 Thermal performance of buildings – Heat transfer via the ground – Calculation methods
• ISO 13406-2:2001 Ergonomic requirements for work with visual displays based on flat panels – Part 2: Ergonomic requirements for flat panel displays [withdrawn 2008-11-14]
• ISO 13450 Photography – 110-size cartridge, film and backing paper – Dimensions
• ISO 13485:2003 Medical devices – Quality management systems – Requirements for regulatory purposes
• ISO/IEC 13490 Information technology – Volume and file structure of read-only and write-once compact disk media for information interchange
• CAD
• ISO/IEC 13568:2002 Information Technology – Z formal specification notation – Syntax, type system and semantics
• ISO 13577 Industrial furnaces and associated processing equipment - Safety
  • ISO 13577-1 General requirements
• ISO 13579 Industrial furnaces and associated processing equipment - Method of measuring energy balance and calculating efficiency
  • ISO 13579-1 General methodology
  • ISO 13579-2 Reheating furnaces for steel
  • ISO 13579-3 Batch-type aluminium melting furnaces
  • ISO 13579-4 Furnaces with protective or reactive atmosphere
• ISO 13586:2000 Plastics - Determination of fracture toughness (GIC and KIC) -- Linear elastic fracture mechanics (LEFM) approach
• ISO 13616 Financial services – International bank account number (IBAN)
• ISO 13628 Petroleum and natural gas industries – Design and operation of subsea production systems
  • ISO 13628-1 General requirements and recommendations
  • ISO 13628-2 Unbonded flexible pipe systems for subsea and marine applications
  • ISO 13628-3 Through flowline (TFL) systems
  • ISO 13628-4 Subsea wellhead and tree equipment
  • ISO 13628-5 Subsea umbilicals
  • ISO 13628-6 Subsea production control systems
  • ISO 13628-7 Completion/workover riser systems
  • ISO 13628-8 Remotely Operated Vehicle (ROV) interfaces on subsea production systems
  • ISO 13628-9 Remotely Operated Tool (ROT) intervention systems
  • ISO 13628-10 Specification for bonded flexible pipe
  • ISO 13628-11 Flexible pipe systems for subsea and marine applications
• ISO 13715 Technical drawings—Edges of undefined shape—Vocabulary and indications
• ISO 13849 Safety of machinery – Safety related parts of control systems
• ISO/IEC 13818 Information technology – Generic coding of moving pictures and associated audio information
• ISO 13837 Road vehicles – Safety glazing materials – Method for the determination of solar transmittance
• ISO 14000 Environmental management systems [This is a set of standards, rather than a single standard.]
• ISO 14001:2004 Environmental management systems – Requirements with guidance for use
• ISO 14004:2004 Environmental management systems – General guidelines on principles, systems and support techniques
• ISO 14031 Environmental management - Environmental performance evaluation – Guidelines
• ISO 14050 Environmental management – Vocabulary
• ISO 14051 Environmental management – Material flow cost accounting - General framework
• ISO 14064 Greenhouse gases
• ISO 14155:2011 Clinical investigation of medical devices for human subjects – Good clinical practice
• ISO 14223 Radiofrequency [sic] identification of animals – Advanced transponders
• ISO 14224 Petroleum, petrochemical and natural gas industries - Collection and exchange of reliability and maintenance data for equipment
• ISO 14230 Road vehicles – Diagnostic systems – Keyword Protocol 2000
• ISO 14405-1 Geometrical product specifications (GPS) – Dimensional tolerancing – Part 1: Linear sizes
• ISO/IEC 14443 Identification cards – Contactless integrated circuit cards – Proximity cards
• ISO/IEC 14462 - Open-EDI Reference Model
• ISO/IEC 14496 Information technology – Coding of audio-visual objects
• ISO 14641 Electronic archiving
  • ISO 14641-1:2012 Specifications concerning the design and the operation of an information system for electronic information preservation
• ISO 14644 Cleanrooms and associated controlled environments
• ISO/IEC 14651 Information technology – International string ordering and comparison – Method for comparing character strings and description of the common template tailorable ordering
• ISO 14698 Cleanrooms and associated controlled environments – Biocontamination control
  • ISO 14698-1 General principles and methods
  • ISO 14698-2 Evaluation and interpretation of biocontamination data
• ISO/IEC 14750 Information technology – Open Distributed Processing – Interface Definition Language
• ISO/IEC 14755 Information technology – Input methods to enter characters from the repertoire of ISO/IEC 10646 with a keyboard or other input device
• ISO 14801 Dentistry – Implants – Dynamic fatigue test for endosseous dental implants
• ISO 14855-1 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions – Method by analysis of evolved carbon dioxide
• ISO 14855-1:2005 General method
• ISO 14855-2:2007 Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test
• ISO/IEC 14882 Programming Languages – C++
• ISO 14915 Software ergonomics for multimedia user interfaces
  • ISO 14915-1:2002 Design principles and framework
  • ISO 14915-2:2003 Multimedia navigation and control
  • ISO 14915-3:2002 Media selection and combination
• ISO 14971:2007 Medical devices – Application of risk management to medical devices
• ISO/IEC 14977 Information technology – Syntactic metalanguage – Extended BNF

ISO 15000 – ISO 19999

• ISO/TS 15000 Electronic business eXtensible Markup Language ebXML
• ISO 15022 Securities – Scheme for messages (Data Field Dictionary)
• ISO 15082 Road vehicles – Tests for rigid plastic safety glazing materials
• ISO 15099 Thermal performance of windows, doors and shading devices – Detailed calculations
• ISO 15112 Natural gas – Energy determination
• ISO 15189 Medical laboratories – Particular requirements for quality and competence
• ISO 15223 Medical devices – Symbols to be used with medical device labels, labelling, and information to be supplied
• ISO/IEC 15288 Systems and software engineering – System life cycle processes
• ISO/IEC 15289 Systems and software engineering – Content of systems and software life cycle process information products (Documentation)
• ISO/IEC 15291 Information technology – Programming languages – Ada Semantic Interface Specification (ASIS)
• ISO 15403 Natural gas – Natural gas for use as a compressed fuel for vehicles
  • ISO 15403-1 Designation of the quality
• ISO/IEC 15408 Information technology – Security techniques – Evaluation criteria for IT security
• ISO/IEC 15414 - Open data processing - Reference Model - Enterprise Language
• ISO/IEC 15434 Information technology – Automatic identification and data capture techniques – Syntax for high-capacity ADC media
• ISO/IEC 15444 Information technology – JPEG 2000 image coding system
• ISO/IEC 15445:2000 Information technology – Document description and processing languages – HyperText Markup Language (HTML)
• ISO 15489-1:2001 Information and documentation – Records management – Part 1: General
• ISO/TR 15489-2:2001 Information and documentation – Records management – Part 2: Guidelines
• ISO/IEC 15504 Information technology – Process assessment
• ISO 15614 Specification and qualification of welding procedures for metallic materials – Welding procedure test
• ISO 15686 Buildings and constructed assets – Service life planning
• ISO/IEC 15693 Identification cards – Contactless integrated circuit cards – Vicinity cards
• ISO 15706 Information and documentation – International Standard Audiovisual Number (ISAN)
• ISO 15707 Information and documentation – International Standard Musical Work Code (ISWC)
• ISO 15783:2002 Seal-less rotodynamic pumps – Class II – Specification
• ISO 15836 Information and documentation – The Dublin Core metadata element set
• ISO/IEC 15897 Information technology – Procedures for registration of cultural elements
• ISO 15924 Information and documentation – Codes for the representation of names of scripts
• ISO 15926 - Integration of Life-cycle Data for Process Plants including Oil and Gas Production Facilities
• ISO 15930 Graphic technology – Prepress digital data exchange using PDF^{[Note 3]}
• ISO/IEC 15944 - Business Agreement Semantic Descriptive Techniques
• ISO/IEC 15948 Information technology – Computer graphics and image processing – Portable Network Graphics (PNG): Functional specification
• ISO 15970 Natural gas – Measurement of properties – Volumetric properties: density, pressure, temperature and compression factor
• ISO 15971:2008 Natural gas – Measurement of properties – Calorific value and Wobbe index
• ISO 15985:2004 Plastics – Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions – Method by analysis of released biogas
• ISO 16134 Earthquake- and subsidence-resistant design of ductile iron pipelines
• ISO 16232 Road vehicles – Cleanliness of components of fluid circuits
  • ISO 16232-8 Particle nature determination by microscopic analysis
  • ISO 16232-9 Particle sizing and counting by automatic light extinction particle counter
  • ISO 16232-10 Expression of results
• ISO/IEC 16262 Information technology – Programming languages, their environments and system software interfaces – ECMAScript language specification
• ISO/IEC 16500 Information technology – Generic digital audio-visual systems
• ISO 16549 Textiles – Unevenness of textile strands – Capacitance method
• ISO 16610 Geometrical product specifications (GPS) – Filtration
• ISO 16750 Road vehicles – Environmental conditions and testing for electrical and electronic equipment
• ISO 16792 Technical product documentation - Digital product definition data practices
• ISO/TS 16949 Quality management systems – Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations
• ISO/TR 16982:2002 Ergonomics of human-system interaction – Usability methods supporting human-centred design
• ISO/IEC 17020:2012 Conformity assessment—Requirements for the operation of various types of bodies performing inspection
• ISO/IEC 17021:2011 Conformity assessment—Requirements for bodies providing audit and certification of management systems
  • ISO/IEC TS 17021-2:2012 Conformity assessment—Requirements for bodies providing audit and certification of management systems—Part 2: Competence requirements for auditing and certification of environmental management systems
  • ISO/IEC TS 17021-3:2013 Conformity assessment—Requirements for bodies providing audit and certification of management systems—Part 3: Competence requirements for auditing and certification of quality management systems
  • ISO/IEC TS 17021-4:2013 Conformity assessment—Requirements for bodies providing audit and certification of management systems—Part 4: Competence requirements for auditing and certification of event sustainability management systems
  • ISO/IEC TS 17021-5:2014 Conformity assessment—Requirements for bodies providing audit and certification of management systems—Part 5: Competence requirements for auditing and certification of asset management systems
• ISO/IEC TS 17022:2012 Conformity assessment—Requirements and recommendations for content of a third-party audit report on management systems
• ISO/IEC TS 17023:2013 Conformity assessment—Guidelines for determining the duration of management system certification audits
• ISO/IEC 17024:2003 Conformity assessment – General requirements for bodies operating certification of persons
• ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
• ISO 17088:2012 Specifications for compostable plastics
• ISO 17202 Textiles – Determination of twist in single spun yarns – Untwist/retwist method
• ISO/PAS 17506 Industrial automation systems and integration – COLLADA digital asset schema specification for 3D visualization of industrial data
• ISO 17776 Petroleum and natural gas industries – Offshore production installations – Guidelines on tools and techniques for hazard identification and risk assessment
• ISO 17799 - Code of Practice for Information Security Management (superseded by ISO/IEC 27002)
• ISO 17894 Ships and marine technology – Computer applications – General principles for the development and use of programmable electronic systems in marine applications
• ISO/IEC 18000 Information technology – Radio frequency identification for item management
  • ISO/IEC 18000-1 Reference architecture and definition of parameters to be standardized
  • ISO/IEC 18000-2 Parameters for air interface communications below 135 kHz
  • ISO/IEC 18000-3 Parameters for air interface communications at 13,56 MHz
  • ISO/IEC 18000-4 Parameters for air interface communications at 2,45 GHz
  • ISO/IEC 18000-6 Parameters for air interface communications at 860 MHz to 960 MHz
  • ISO/IEC 18000-7 Parameters for active air interface communications at 433 MHz
• ISO/IEC 18004 Information technology – Automatic identification and data capture techniques – QR Code 2005 bar code symbology specification
• ISO/IEC 18009 Information technology – Programming languages – Ada: Conformity assessment of a language processor
• ISO/IEC 18013 Information technology – Personal identification – ISO-compliant driving license
  • ISO/IEC 18013-1:2005 Physical characteristics and basic data set
  • ISO/IEC 18013-2:2008 Machine-readable technologies
  • ISO/IEC 18013-3:2009 Access control, authentication and integrity validation
• ISO/IEC 18014 Information technology – Security techniques – Time-stamping services
• ISO/IEC 18023 Information technology – SEDRIS
• ISO/IEC 18024-4:2006 Information technology – SEDRIS language bindings – Part 4: C
• ISO/IEC 18025:2005 Information technology – Environmental Data Coding Specification (EDCS)
• ISO/IEC 18026 Information technology – Spatial Reference Model (SRM)
• ISO/IEC 18033 Information technology – Security techniques – Encryption algorithms
  • ISO/IEC 18033-1 General
  • ISO/IEC 18033-2 Asymmetric ciphers
  • ISO/IEC 18033-3 Block ciphers
  • ISO/IEC 18033-4 Stream ciphers
• ISO/IEC 18041-4 Information technology – Computer graphics, image processing and environmental data representation – Environmental Data Coding Specification (EDCS) language bindings – Part 4: C
• ISO/IEC 18042-4:2006 Information technology – Computer graphics and image processing – Spatial Reference Model (SRM) language bindings – Part 4: C
• ISO/IEC 18092 Information technology – Telecommunications and information exchange between systems – Near Field Communication – Interface and Protocol (NFCIP-1)
• ISO 18117:2009 Surface chemical analysis – Handling of specimens prior to analysis
• ISO 18118:2004 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
• ISO/TS 18152 Ergonomics of human-system interaction – Specification for the process assessment of human-system issues
• ISO 18185 Freight containers – Electronic seals
• ISO 18245 Retail financial services – Merchant category codes
• ISO/TR 18529:2000 Ergonomics – Ergonomics of human-system interaction – Human-centred lifecycle process descriptions
• ISO 18541 Road vehicles – Standardized access to automotive repair and maintenance information (RMI)
• ISO 18629 Industrial automation systems and integration – Process specification language
• ISO 19005 Document management – Electronic document file format for long-term preservation
• ISO 19011:2011 Guidelines for auditing management systems
• ISO 19092 Financial services – Biometrics – Security framework
• ISO 19101 Geographic information – Reference model
• ISO/TS 19103 Geographic information – Conceptual schema language
• ISO/TS 19104 Geographic information – Terminology
• ISO 19105 Geographic information – Conformance and testing
• ISO 19106 Geographic information – Profiles
• ISO 19107 Geographic information – Spatial schema
• ISO 19108 Geographic information – Temporal schema
• ISO 19109 Geographic information – Rules for application schema
• ISO 19110 Geographic information – Methodology for feature cataloguing
• ISO 19111 Geographic information – Spatial referencing by coordinates
• ISO 19112 Geographic information – Spatial referencing by geographic identifiers
• ISO 19113 Geographic information – Quality principles
• ISO 19114 Geographic information – Quality evaluation procedures
• ISO 19115 Geographic information – Metadata
• ISO 19116 Geographic information – Positioning services
• ISO 19117 Geographic information – Portrayal
• ISO 19118 Geographic information – Encoding
• ISO 19119 Geographic information – Services
• ISO/TR 19120 Geographic information – Functional standards
• ISO/TR 19121 Geographic information – Imagery and gridded data
• ISO/TR 19122 Geographic information / Geomatics – Qualification and certification of personnel
• ISO 19123 Geographic information – Schema for coverage geometry and functions
• ISO 19125 Geographic information – Simple feature access
• ISO 19126 Geographic information – Feature concept dictionaries and registers
• ISO/TS 19127 Geographic information – Geodetic codes and parameters
• ISO 19128 Geographic information – Web map server interface
• ISO/TS 19129 Geographic information – Imagery, gridded and coverage data framework
• ISO/TS 19130 Geographic information – Imagery sensor models for geopositioning
• ISO 19131 Geographic information – Data product specifications
• ISO 19132 Geographic information – Location-based services – Reference model
• ISO 19133 Geographic information – Location-based services – Tracking and navigation
• ISO 19134 Geographic information – Location-based services – Multimodal routing and navigation
• ISO 19135 Geographic information – Procedures for item registration
• ISO 19136 Geographic information – Geography Markup Language (GML)
• ISO 19137 Geographic information – Core profile of the spatial schema
• ISO/TS 19138 Geographic information – Data quality measures
• ISO/TS 19139 Geographic information – Metadata – XML schema implementation
• ISO 19141 Geographic information – Schema for moving features
• ISO 19142 Geographic information – Web Feature Service
• ISO 19143 Geographic information – Filter encoding
• ISO 19144 Geographic information – Classification systems
• ISO 19146 Geographic information – Cross-domain vocabularies
• ISO 19156 Geographic information - Observations and measurements
• ISO 19439 Enterprise integration – Framework for enterprise modelling
• ISO 19440 Enterprise integration – Constructs for enterprise modelling
• ISO/IEC 19501 Information technology – Open Distributed Processing – Unified Modeling Language (UML) Version 1.4.2
• ISO/IEC 19502 Information technology – Meta Object Facility (MOF)
• ISO/IEC 19503 Information technology – XML Metadata Interchange (XMI)
• ISO/IEC 19752 Information technology – Method for the determination of toner cartridge yield for monochromatic electrophotographic printers and multi-function devices that contain printer components
• ISO/IEC 19757 Information technology – Document Schema Definition Languages (DSDL)
  • ISO/IEC 19757-2 Regular-grammar-based validation – RELAX NG
  • ISO/IEC 19757-3 Rule-based validation – Schematron
  • ISO/IEC 19757-4 Namespace-based Validation Dispatching Language (NVDL)
• ISO/IEC 19770 Information technology – Software asset management
• ISO/IEC 19785 Information technology – Common Biometric Exchange Formats Framework
• ISO/IEC 19788 Information technology – Learning, education and training – Metadata for learning resources
• ISO/IEC 19790 Information technology – Security techniques – Security requirements for cryptographic modules
• ISO/IEC 19793 - Open Distributed Processing—Use of UML for ODP system specifications
• ISO/IEC 19794 Information technology – Biometric data interchange formats
  • ISO/IEC 19794-1:2011 Framework
  • ISO/IEC 19794-2:2005 Finger minutiae data
  • ISO/IEC 19794-3:2006 Finger pattern spectral data
  • ISO/IEC 19794-4:2005 Finger image data
  • ISO/IEC 19794-5:2005 Face image data
  • ISO/IEC 19794-6:2005 Iris image data
  • ISO/IEC 19794-7:2007 Signature/sign time series data
  • ISO/IEC 19794-8:2006 Finger pattern skeletal data
  • ISO/IEC 19794-9:2007 Vascular image data
  • ISO/IEC 19794-10:2007 Hand geometry silhouette data

ISO 20000 – ISO 29999

• ISO/IEC 20000 Information technology – Service management
• ISO 20022 Financial services – UNIversal Financial Industry message scheme
• ISO 20653 Road vehicles - Degrees of protection (IP-Code) - Protection of electrical equipment against foreign objects, water and access
• ISO/IEC TR 20943 Information technology – Procedures for achieving metadata registry content consistency
  • ISO/IEC TR 20943-1:2003 Data elements
  • ISO/IEC TR 20943-3:2004 Value domains
• ISO/IEC 21000 Information technology – Multimedia framework (MPEG-21)
• ISO/IEC 21481 Information technology – Telecommunications and information exchange between systems – Near Field Communication Interface and Protocol -2 (NFCIP-2)
• ISO 21482 Ionizing-radiation warning – Supplementary symbol
• ISO 21500 Guidance on project management
• ISO 22000:2005 Food safety management systems – Requirements for any organization in the food chain
• ISO/TS 22002 Prerequisite programmes on food safety
  • ISO/TS 22002-1:2009 Prerequisite programmes on food safety – Part 1: Food manufacturing
  • ISO/TS 22002-2:2013 Prerequisite programmes on food safety – Part 2: Catering
  • ISO/TS 22002-3:2011 Prerequisite programmes on food safety – Part 3: Farming
• ISO/TS 22003:2013 Food safety management systems – Requirements for bodies providing audit and certification of food safety management systems
• ISO 22004:2014 Food safety management systems – Guidance on the application of ISO 22000
• ISO 22005:2007 Traceability in the feed and food chain – General principles and basic requirements for system design and implementation
• ISO 22093 Industrial automation systems and integration – Physical device control – Dimensional Measuring Interface Standard (DMIS)
• ISO 22241 Diesel engines – NOx reduction agent AUS 32
  • ISO 22241-1 Quality requirements
  • ISO 22241-2 Test methods
  • ISO 22241-3 Handling, transportation and storing
• ISO/IEC TR 22250 Information technology – Document description and processing languages – Regular Language Description for XML (RELAX)
  • ISO/IEC TR 22250-1:2002 RELAX Core
• ISO 22301:2012 Societal security – Business continuity management systems – Requirements
• ISO/PAS 22399:2007 Societal security – Guideline for incident preparedness and operational continuity management
• ISO 22716:2007 Cosmetics – Good Manufacturing Practices (GMP) – Guidelines on Good Manufacturing Practices
• ISO/IEC 23001 – Information technology – MPEG systems technologies
  • ISO/IEC 23001-1:2006 – Part 1: Binary MPEG format for XML
  • ISO/IEC 23001-2:2008 – Part 2: Fragment request units
  • ISO/IEC 23001-3:2008 – Part 3: XML IPMP messages
  • ISO/IEC 23001-4:2014 – Part 4: Codec configuration representation
  • ISO/IEC 23001-5:2008 – Part 5: Bitstream Syntax Description Language (BSDL)
  • ISO/IEC 23001-7:2015 – Part 7: Common encryption in ISO base media file format files
  • ISO/IEC 23001-8:2013 – Part 8: Coding-independent code points
  • ISO/IEC 23001-9:2014 – Part 9: Common encryption of MPEG-2 transport streams
• ISO/IEC 23002 Information technology – MPEG video technologies
• ISO/IEC 23003 Information technology – MPEG audio technologies
  • ISO/IEC 23003-1 MPEG Surround
  • ISO/IEC 23003-2 Spatial Audio Object Coding (SAOC)
• ISO/IEC 23270 Information technology – Programming languages – C#
• ISO/IEC 23271 Information technology – Common Language Infrastructure (CLI)
• ISO/IEC 23360 Linux Standard Base (LSB) core specification 3.1
  • ISO/IEC 23360-1 Generic specification
  • ISO/IEC 23360-2 Specification for IA32 architecture
  • ISO/IEC 23360-3 Specification for IA64 architecture
  • ISO/IEC 23360-4 Specification for AMD64 architecture
  • ISO/IEC 23360-5 Specification for PPC32 architecture
  • ISO/IEC 23360-6 Specification for PPC64 architecture
  • ISO/IEC 23360-7 Specification for S390 architecture
  • ISO/IEC 23360-8 Specification for S390X architecture
• ISO 23733 Textiles – Chenille yarns – Test method for the determination of linear density
• ISO 23950 Information and documentation – Information retrieval (Z39.50) – Application service definition and protocol specification
• ISO/IEC 24707:2007 Information technology – Common Logic (CL): a framework for a family of logic-based languages
• ISO/IEC 24727 Identification cards – Integrated circuit card programming interfaces
  • ISO/IEC 24727-1 Architecture
  • ISO/IEC 24727-2 Generic card interface
  • ISO/IEC 24727-3 Application interface
  • ISO/IEC 24727-4 Application programming interface (API) administration
  • ISO/IEC 24727-5 Testing procedures
  • ISO/IEC 24727-6 Registration authority procedures for the authentication protocols for interoperability
• ISO/IEC 24744:2014 Software Engineering – Metamodel for Development Methodologies
• ISO/IEC TR 24748:2010 Systems and software engineering - Life cycle management
• ISO/IEC 24762:2008 Information technology – Security techniques – Guidelines for information and communications technology disaster recovery services
• ISO 25178 Geometrical product specifications (GPS) – Surface texture: Areal
• ISO 26000 Guidance on social responsibility
• ISO/IEC 26300 Information technology – Open Document Format for Office Applications (OpenDocument) v1.0
• ISO/IEC 27000 Information technology – Security techniques – Information security management systems – Overview and vocabulary
• ISO/IEC 27001 Information technology – Security techniques – Information security management systems – Requirements
• ISO/IEC 27002 Information technology – Security techniques – Code of practice for information security management
• ISO/IEC 27003 Information technology – Security techniques – Information security management system implementation guidance
• ISO/IEC 27004 Information technology – Security techniques – Information security management – Measurement
• ISO/IEC 27005 Information technology – Security techniques – Information security risk management
• ISO/IEC 27006 Information technology – Security techniques – Requirements for bodies providing audit and certification of information security management systems
• ISO/IEC 27011 Information technology – Security techniques – Information security management guidelines for telecommunications organizations based on ISO/IEC 27002
• ISO/IEC 27037:2012 Information technology – Security techniques – Guidelines for identification, collection, acquisition and preservation of digital evidence
• ISO/TS 27687:2008 Nanotechnologies – Terminology and definitions for nano-objects – Nanoparticle, nanofibre and nanoplate
• ISO 27799:2008 Health informatics—Information security management in health using ISO/IEC 27002
• ISO 28000 Specification for security management systems for the supply chain
• ISO 28001:2007 Security management systems for the supply chain – Best practices for implementing supply chain security, assessments and plans – Requirements and guidance
• ISO 28003 Security management systems for the supply chain – Requirements for bodies providing audit and certification of supply chain security management systems
• ISO 28004 Security management systems for the supply chain – Guidelines for the implementation of ISO 28000
• ISO/PAS 28007:2012 Ships and marine technology—Guidelines for Private Maritime Security Companies (PMSC) providing privately contracted armed security personnel (PCASP) on board ships (and pro forma contract)
• ISO 28300:2008 Petroleum, petrochemical and natural gas industries – Venting of atmospheric and low-pressure storage tanks
• ISO/IEC 29119 Software and systems engineering – Software testing
• ISO/IEC 29500 Information technology – Document description and processing languages – Office Open XML File Formats
  • ISO/IEC 29500-1 Fundamentals and Markup Language Reference
  • ISO/IEC 29500-2 Open Packaging Conventions
  • ISO/IEC 29500-3 Markup Compatibility and Extensibility
  • ISO/IEC 29500-4 Transitional Migration Features

ISO 30000 – ISO 49999

• ISO 30000:2009 Ships and marine technology – Ship recycling management systems – Specifications for management systems for safe and environmentally sound ship recycling facilities
• ISO/IEC 30170:2012 Information technology – Programming languages – Ruby
• ISO 31000:2009 Risk management – Principles and guidelines
• ISO/IEC 31010:2009 Risk management - Risk assessment techniques
• ISO 32000 Document management – Portable document format
• ISO/IEC 38500:2008 Corporate governance of information technology
• ISO/IEC 40500:2012 Information technology – W3C Web Content Accessibility Guidelines (WCAG) 2.0

ISO 50000 - ISO 59999

• ISO 50001:2011 Energy management systems – Requirements with guidance for use
• ISO 55000:2014 Asset management – Overview, principles and terminology

ISO 80000

• ISO/IEC 80000 Quantities and units
• ISO/TS 80004 Nanotechnologies – Vocabulary
  • ISO/TS 80004-1 Core terms
  • ISO/TS 80004-3 Carbon nano-objects
  • ISO/TS 80004-4 Nanostructured materials
  • ISO/TS 80004-5 Nano/bio interface
  • ISO/TS 80004-7 Diagnostics and therapeutics for healthcare

See also

• International Classification for Standards
• List of ASTM International standards
• List of DIN standards
• List of EN standards
• List of IEC standards

Notes

1. ^ This list generally excludes draft versions.
2. ^ ISO deliverables include "specifications" (ISO/PAS, ISO/TS), "reports" (ISO/TR), etc, which are not referred to by ISO as "standards".
3. ^ ^{a b c d e f g h i j k l m} The exact wording of this title varies between parts. This is the wording of the most recently published part.

References

External links

• International Organization for Standardization

ISO standards by standard number List of ISO standards / ISO romanizations / IEC standards 1–9999 1 2 3 4 5 6 7 9 16 31 -0 -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 128 216 217 226 228 233 259 269 302 306 428 518 519 639 -1 -2 -3 -5 -6 646 690 732 764 843 898 965 1000 1004 1007 1073-1 1413 1538 1745 1989 2014 2015 2022 2047 2108 2145 2146 2240 2281 2709 2711 2788 2852 3029 3103 3166 -1 -2 -3 3297 3307 3602 3864 3901 3977 4031 4157 4217 4909 5218 5428 5775 5776 5800 5964 6166 6344 6346 6385 6425 6429 6438 6523 6709 7001 7002 7098 7185 7200 7498 7736 7810 7811 7812 7813 7816 8000 8178 8217 8571 8583 8601 8632 8652 8691 8807 8820-5 8859 -1 -2 -3 -4 -5 -6 -7 -8 -8-I -9 -10 -11 -12 -13 -14 -15 -16 8879 9000/9001 9075 9126 9293 9241 9362 9407 9506 9529 9564 9594 9660 9897 9945 9984 9985 9995 10000–19999 10006 10116 10118-3 10160 10161 10165 10179 10206 10218 10303 -11 -21 -22 -28 -238 10383 10487 10585 10589 10646 10664 10746 10861 10957 10962 10967 11073 11170 11179 11404 11544 11783 11784 11785 11801 11898 11940 (-2) 11941 11941 (TR) 11992 12006 12182 12207 12234-2 13211 -1 -2 13216 13250 13399 13406-2 13407 13450 13485 13490 13567 13568 13584 13616 14000 14031 14224 14289 14396 14443 14496 -2 -3 -6 -10 -11 -12 -14 -17 -20 14644 -1 -2 -3 -4 -5 -6 -7 -8 -9 14649 14651 14698 -2 14750 14764 14882 14971 15022 15189 15288 15291 15292 15398 15408 15444 -3 15445 15438 15504 15511 15686 15693 15706 -2 15707 15897 15919 15924 15926 15926 WIP 15930 16023 16262 16612-2 16750 16949 (TS) 17024 17025 17203 17369 17799 18000 18004 18014 18245 18629 18916 19005 19011 19092 (-1 -2) 19114 19115 19125 19136 19439 19500 19501 19502 19503 19505 19506 19507 19508 19509 19510 19600 19752 19757 19770 19775-1 19794-5 19831 20000+ 20000 20022 20121 21000 21047 21500 21827:2002 22000 23270 23271 23360 24517 24613 24617 24707 25178 25964 26000 26300 26324 27000 series 27000 27001:2005 27001:2013 27002 27003 27004 27005 27006 27007 27729 27799 28000 29110 29148 29199-2 29500 30170 31000 32000 38500 40500 42010 80000 -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 Categories ISO standards ISO 639 ISO 3166 ISO / IEC standards OSI protocols