This article will be permanently flagged as inappropriate and made unaccessible to everyone. Are you certain this article is inappropriate? Excessive Violence Sexual Content Political / Social
Email Address:
Article Id: WHEBN0000624033 Reproduction Date:
The Reynolds-averaged Navier–Stokes equations (or RANS equations) are time-averaged^{[1]} equations of motion for fluid flow. The idea behind the equations is Reynolds decomposition, whereby an instantaneous quantity is decomposed into its time-averaged and fluctuating quantities, an idea first proposed by Osborne Reynolds.^{[2]} The RANS equations are primarily used to describe turbulent flows. These equations can be used with approximations based on knowledge of the properties of flow turbulence to give approximate time-averaged solutions to the Navier–Stokes equations. For a stationary, incompressible Newtonian fluid, these equations can be written in Einstein notation as:
The left hand side of this equation represents the change in mean momentum of fluid element owing to the unsteadiness in the mean flow and the convection by the mean flow. This change is balanced by the mean body force, the isotropic stress owing to the mean pressure field, the viscous stresses, and apparent stress \left( - \rho \overline{u_i^\prime u_j^\prime} \right) owing to the fluctuating velocity field, generally referred to as the Reynolds stress. This nonlinear Reynolds stress term requires additional modeling to close the RANS equation for solving, and has led to the creation of many different turbulence models. The time-average operator \overline{.} is a Reynolds operator.
The basic tool required for the derivation of the RANS equations from the instantaneous Navier–Stokes equations is the Reynolds decomposition. Reynolds decomposition refers to separation of the flow variable (like velocity u) into the mean (time-averaged) component (\overline{u}) and the fluctuating component (u^{\prime}). Because the mean operator is a Reynolds operator, it has a set of properties. One of these properties is that the mean of the fluctuating quantity being equal to zero (\bar{u^\prime} = 0). Thus,
The properties of Reynolds operators are useful in the derivation of the RANS equations. Using these properties, the Navier–Stokes equations of motion, expressed in tensor notation, are (for an incompressible Newtonian fluid):
where f_i is a vector representing external forces.
Next, each instantaneous quantity can be split into time-averaged and fluctuating components, and the resulting equation time-averaged,
^{[4]} to yield:
The momentum equation can also be written as,^{[5]}
On further manipulations this yields,
where, \bar{S_{ij}} = \frac{1}{2}\left( \frac{\partial \bar{u_i}}{\partial x_j} + \frac{\partial \bar{u_j}}{\partial x_i} \right) is the mean rate of strain tensor.
Finally, since integration in time removes the time dependence of the resultant terms, the time derivative must be eliminated, leaving:
Fluid dynamics, Invariant theory, Turbulence, Reynolds-averaged Navier–Stokes equations, Osbourne Reynolds
Reynolds number, Chaos theory, Viscosity, God, Fluid dynamics
Continuum mechanics, Turbulence, Gradient, Isaac Newton, Nonlinear
Queens' College, Cambridge, Reynolds number, University of Manchester, Belfast, Physics
Pressure, Viscosity, Energy, Isaac Newton, Electromagnetism
Reynolds-averaged Navier–Stokes equations, Rans Designs