World Library  
Flag as Inappropriate
Email this Article

Spinner (wheel)

Article Id: WHEBN0002558363
Reproduction Date:

Title: Spinner (wheel)  
Author: World Heritage Encyclopedia
Language: English
Subject: Pimp My Ride, Spinner, Alloy wheel, Hood ornament, Soul Plane
Collection: American Inventions, Auto Parts, Automotive Accessories, Automotive Styling Features, Vehicle Modification
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Spinner (wheel)

The spinner on automobile wheels historically refers to knock-off hubs or center caps. They may be the actual, or intended to simulate, the design used on antique vehicles or vintage sports cars. A "spinner wheel" in contemporary usage is a type of hubcap or inner wheel ornament, that spins independently inside of a wheel itself when the vehicle is in motion, and continues to spin once the vehicle has come to a stop.

Contents

  • Original use 1
  • Other uses 2
  • Modern concept 3
  • Music 4
  • See also 5
  • References 6

Original use

Two bladed spinner on wire wheel
1967 AMC wheel cover with spinner

The spinner cap was introduced into the commercial vehicle and passenger automobile market in the 1930s.[1] The spinner or "knock-off" was designed to keep the wheel on the automobile. They were screwed on and "knocked on tightly" using hammers and tools, hence the name "knock-offs". Most setups will feature right-hand threads on the left side of the vehicle, and left-hand threads (rotate clockwise to remove) on the vehicle's right side so the screw-on spinner would stay tightened as the auto was in forward motion.[2] The knock-off spinners were used until the development of the lug nut method attaching the wheel.

During the 1950s automobile manufacturers offered simulated wire wheel covers for a look of luxury that featured criss-crossing spokes designed to look like the real wire wheels that were used on vehicles in the 1920s and 1930s.[3] These "spinner-wheel covers" were available on standard as well as featured on custom cars, and lowriders quickly adapted them for their own vehicles.[4]

During the early-1960s, the simulated wire wheel covers returned, but with new look designed to emphasize sportiness with their radiating spokes and center "spinner caps."[3][5] These classic center spinner caps feature a rigidly mounted propeller-like center element, usually with two or three projecting "blades."[6] They were intended to simulate the knock-off hubs that were used on vintage racing vehicles and classic sports cars where a hammer or special wrench was used on the spinner to release or tighten the wheel to the hub.[7]

These spinner hubcaps were most often an optional appearance upgrade to the standard equipment hubcaps or full wheel covers that attached to stamped steel wheels.[8]

In the late 1960s, U.S. Federal safety standards banned the use of protruding bar spinners on automobiles.[1]

Other uses

The mid-1950s Dodge four-bladed “spinner” wheel covers became an icons for the era and also became an item popular to owners to customize their cars.[9][10]

Spinners were add on accessory marketed during the 1950s to decorate regular wheel covers for a custom look.[11] Center spinner hubcaps were also available as original equipment from automakers.[12]

Custom wheels for lowriders also used naked ladies on wheel covers and these were the first to feature a floating or spinner-type wheel device. A bracket was used to mount to the spindle so while the lady stood still the wheel spun around.[13] Similarly, the Rolls-Royce Phantom has anti-spinners — the "RR" logo in the center of the hub is mounted on a spinner with an offset weight designed to ensure that the logo is always the right way up when the car is parked.

The hubometers used on large trucks, buses, and trailers that appear to be stationary while the wheel is turning to accurately measure the actual distance covered. They are actually enclosed and float in a liquid with anti-freeze as to be functional in severe low temperatures without freezing.

Modern concept

Spinner wheel

The modern spinner device is a decorative kinetic attachment to the wheel of an automobile.[14] The spinner covers the center of a car's wheel and is designed to independently rotate by using one or more roller bearings to isolate the spinner from the wheel, enabling it to turn while the wheel is at rest.[14]

Legislative bills were proposed in several states to ban spinner type wheels and hubcaps that simulate movement even when a vehicle is stopped because they could be disconcerting to other motorists and present a safety hazard.[15]

Spinners were popular during the early-2000s within the hip-hop community of the United States. Since the mid-2000s, they are gradually fading out of vogue in popular culture.[16][17]

Music

The spinner-type automobile hubcaps were the inspiration for a Detroit-area R&B/soul group, The Domingoes, to rename themselves The Spinners in the late 1950s.[18]

In 1960, Pat Davis recorded the song "Spinner Hub Caps".[19]

The Modern Day Spinners were then popularized by the 2003 Three 6 Mafia single "Ridin' Spinners" featuring Lil' Flip. Other songs by followed by numerous artists. Music videos also featured the use of spinners. Spinners have been shown in television shows such as "MTV Cribs," ESPN's "The Life," and "NBA Inside Stuff."

See also

References

  1. ^ a b Browne, Ray B.; Browne, Pat, eds. (2001). The guide to United States popular culture. Bowling Green State University Popular Press. p. 416.  
  2. ^ Mavrigian, Mike (2008). High Performance Fasteners & Plumbing : A Guide to Nuts, Bolts, Fuel, Brake, Oil & Coolant Lines, Hoses, Clamps, Racinghardware and Plumbing Techniques. HP Books.  
  3. ^ a b Connor, Sean (22 January 2012). "A look back at simulated wire wheel covers. Part 2: the 1960s". Newark Classic Cars Examiner. 
  4. ^ Tatum, Charles M. (2011). Lowriders in Chicano Culture: From Low to Slow to Show:. ABC-CLIO. pp. 199–200.  
  5. ^ Gunnell, John (2006). Standard Catalog of American Muscle Cars 1960-1972. Krause Publications. p. 10.  
  6. ^ Corcoran, Tom (1994). Mustang 1964½–1968. MBI Publishing. p. 27.  
  7. ^ Clausager, Anders Ditlev (2003). Original MGA. MBI Publishing. p. 84.  
  8. ^ Cheetham, Craig (2007). Ultimate Muscle Cars. MBI Publishing. p. 74.  
  9. ^ Gunnell, John (2004). Standard guide to 1950s American cars. Krause Publications.  
  10. ^ Kustom Kemps of America: Commemorative Book. Turner Publishing. 2003.  
  11. ^ Crow, Deette (2004). Rod & Custom in the 1950s. Motorbooks International. p. 209.  
  12. ^ Holder, Bill; Kunz, Phil (2003). Chrysler Muscle: Detroit's Mightiest Machines. Krause Publications. p. 22.  
  13. ^ Perea, Sammy J. (February 2009). "History of the Wheel: A loose look at the wheels and tires that lowriders have loved to roll on". Lowrider. Retrieved 9 October 2012. 
  14. ^ a b Sobe, Ed (2009). A Field Guide to Automotive Technology. Chicago Review Press. p. 28.  
  15. ^ "Spinner wheels and hubcaps face bans in several states". SEMA Market Snapshot. 15 June 2005. Retrieved 11 June 2013. 
  16. ^ "Choosing the Best Tires for Your Car". Smartguy.com. 2008. Retrieved 11 June 2013. 
  17. ^ "How to Select New Rims and Tires for Your Car". Auto Parts & Accessories. 19 August 2012. Retrieved 11 June 2013. 
  18. ^ Marshall, Tim. "The 'One of a Kind' Sound of The Spinners". R&B Showcase News (7). Retrieved 9 October 2012. 
  19. ^ Schmidling, Tyrone (26 April 2009). "Pat Davis "Spinner Hub Caps" 1960". Youtube.com. Retrieved 11 June 2013. 
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 



Copyright © World Library Foundation. All rights reserved. eBooks from World eBook Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.