World Library  
Flag as Inappropriate
Email this Article
 

Bob Loveless

Robert Waldorf Loveless (January 2, 1929 – September 2, 2010[1]), aka Bob Loveless or RW Loveless, was an American knife maker who designed and popularized the hollowground drop point blade and the use of full tapered tangs and screw-type handle scale fasteners within the art of knifemaking. He is cited by other knifemakers and collectors as one of the most innovative custom knife makers in the world.

Robert Waldorf Loveless
Born (1929-01-02)January 2, 1929
Warren, Ohio, U.S.
Died 2 September 2010(2010-09-02) (aged 81)
Riverside, California, U.S.
Alma mater Kent State, Ohio
Occupation Knifemaker
Awards Blade Cutlery Hall of Fame

Contents

  • Early life 1
  • Knifemaking 2
  • Quotes 3
  • References 4
  • External links 5

Early life

Loveless was born on January 2, 1929 in Warren, Ohio. When he was 14, he altered his birth certificate and joined the Merchant Marine and later served as an Air Corps control tower operator on Iwo Jima. He witnessed a number of knife fights in the bars of foreign ports, which he attributed to giving him an interest in knives.[2]

In 1950 Loveless attended Chicago's Armour Institute of Technology (later renamed Illinois Institute of Technology - IIT) and took a course taught by the architect Ludwig Mies van der Rohe. In 1951 he returned to Ohio and studied literature and sociology at Kent State.[2]

Knifemaking

In December 1953, Loveless returned to the Merchant Marine on a tanker based in New York. Loveless visited

  • Bob Loveless Photo & Biographical Info
  • A documentary about Bob Loveless

External links

  1. ^ a b Nelson, Valerie J. (September 9, 2010). "R.W. 'Bob' Loveless dies at 81; master knife-maker". Los Angeles Times. 
  2. ^ a b c d e f g h i j k l Reed, J.D. (July 14, 1980). "On The Cutting Edge". Sports Illustrated. Retrieved 3 October 2011. 
  3. ^ Williams, Al, Living on the Edge - Logos of the Loveless Legend. ISBN 0-9613834-5-3
  4. ^ Stevenson, Robert (1971). "Shop Talk:Homemade Knifemakers now have a new club". Popular Science (Bonnier Corporation) 199 (4): 140. 
  5. ^  
  6. ^ "Guild History". The Knifemakers' Guild. Archived from the original on 2006-07-16. Retrieved 2006-07-25. 
  7. ^ Shackleford, Steve (2006). "Top Knife Innovations of the Past 50 Years". Blade Magazine 36 (8). 
  8. ^ Latham, Sid (1973). "Cutlery". Field & Stream 78 (3): 51. 
  9. ^ Kertzman, Joe (2002). Sporting Knives: Folders, Fixed Blades, Pocket, Military, Gent's Knives, Multi-Tools, Swords (2 ed.). Krause Publications. p. 66.  
  10. ^ Gromer, Cliff (2002). "Art on the Cutting Edge". Field & Stream 179 (6): 46. 
  11. ^ Karwan, Charles (2004). "Collaborating for Quality". Hunt Forever Magazine (Safari Club International) 40 (4). 
  12. ^ Barney, Richard W.; Loveless, Robert W. (March 1995) [1977]. How to Make Knives. Knife World Publications.  
  13. ^ Haskew, Mike (1984). "Bob Loveless". Blade 24 (7). 

References

  • "Our lives are mired in detritus. Objects own us; they keep us from our creativity."[2]
  • "Why would anyone pay $3,000 for a hunting knife? They say, because my name is on it. I'm carrying an awfully big rep. If I were a gunfighter, I'd be hiding in a cave somewhere. But I wouldn't spend that much money for a knife if it were autographed by Jesus Christ himself!"[2]
  • "What's the point of a new knife in a museum or a cabinet? That's for history to decide, not the knifemaker."[2]
  • "When a man picks up a knife, there's an old memory from the collective unconscious that surfaces. A knife is an atavistic experience. It was man's first tool and weapon. Man was chipping flint into cutting edges before he invented the wheel. No matter how sophisticated we become, a knife takes us back to the cave."[2]

Quotes

Loveless died September 2, 2010, aged 81, of lung cancer at his longtime home in Riverside, California.[1]

For his many influences in custom knife design and promoting the art of handmade knives, Loveless was inducted into the Blade magazine Cutlery Hall of Fame at the 1985 Blade Show in Knoxville, Tennessee.[13]

Loveless authored several books on making knives such as the 1977 How to Make Knives with coauthor Richard Barney.[12]

Loveless designed the Gerber Guardian knife model for Gerber Knives and for a time was Gerber's Lead designer.[2] Loveless went on to design knives for other factories such as Lone Wolf Knives, Beretta,[9] Schrade Cutlery[10] and others. Cold Steel makes a reproduction of his "Big Bear Classic" fighting knife. Loveless had been a participating maker from 1993 through 2006 in the Art Knife Invitational Show which is a closed association of the 25 most collectible knifemakers.[11]

Loveless made fighting knives and is considered to be the first maker to produce what is known as a "Tactical Knife". However, Loveless refused to sell a customer one of his fighting knives unless the buyer could provide either police or military identification and could require a knife as a weapon. Loveless made knives for use by US Army Special Forces and the CIA. One such knife was the size and shape of a pocket comb and fit inside a passport case. When the case was thrown, the blade cut through the case and sliced into whatever it hit.[2]

Loveless marked his blades by acid-etching his logo on the blade:"R.W. LOVELESS, MAKER, RIVERSIDE, CALIFORNIA", some of his knives carried the image of a reclining nude woman. Most of his contemporaries stamped their logo on their knives using a power hammer or other device. Loveless believed this stamping could compromise the strength of the knife by causing stress fractures in the steel.[2]

Loveless introduced 154CM steel and ATS-34 stainless steel to the knife making world in 1972 and pioneered the use of Micarta as a handle material.[7][8] Loveless always considered himself a "Bench Maker" as opposed to a "Custom Maker" in that he only made knives from patterns that he designed instead of ideas that came from his customers. The only input Loveless would receive from a customer would be the regarding type of handle material used in the knife's construction.[2]

Through his study of 19th-century techniques, Loveless developed the full-tapered-tang method of knife construction. This technique was formerly used to offset the weaknesses of steel in use prior to modern metallurgy. In Loveless' knives the entire piece of steel used to make the knife ran to the end of the butt as opposed to being cut to half the length of the handle and either pinned or glued in place. Loveless tapered the butt-end of the tang down to 1/16" the same way he tapered the point on the blade, placing the balance of the knife's weight in the center. The handles were secured via screw-type fasteners, making for a stronger knife overall.[2]

From 1954 to 1960 Loveless made over one thousand knives called "Delaware Maids" and they became Abercrombie & Fitch's best-selling handmade items, outselling the Randall blades. Loveless admitted that these knives were copies of Randall's designs, but by 1960 he began making his own innovations which set them apart.[2] Loveless was a founding member of the Knifemakers' Guild in 1970 and served as the club's first Secretary. Loveless would go on to serve two terms as the Guild's president from 1973 to 1976.[4][5][6]

[3]

This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 



Copyright © World Library Foundation. All rights reserved. eBooks from World eBook Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.