World Library  
Flag as Inappropriate
Email this Article


Article Id: WHEBN0000641656
Reproduction Date:

Title: CubeSat  
Author: World Heritage Encyclopedia
Language: English
Subject: GAUSS Srl, ArduSat, ICube-1, Delfi-C3, Planet Labs
Collection: Cubesats, Satellites by Type
Publisher: World Heritage Encyclopedia


Ncube-2, a Norwegian CubeSat (10 cm cube)

A CubeSat (U-class spacecraft)[1] is a type of miniaturized satellite for space research made up of multiples of 10×10×11.35 cm cubic units, has a mass of no more than 1.33 kilograms per unit,[2] and often see the use of commercial off-the-shelf components for its electronics and structure. CubeSats are most commonly put in orbit by deployers on the International Space Station, or launched as secondary payloads on a launch vehicle.[3]

Beginning in 1999, California Polytechnic State University (Cal Poly) and Stanford University developed the CubeSat specifications to promote and develop the skills necessary for the design, manufacturing, and testing of small satellites intended for low Earth orbit (LEO) that perform a number of scientific research functions and explore new space technologies. Academia accounted for the majority of CubeSat launches until 2013 when over half of launches were for non-academic purposes, and by 2014 most newly deployed CubeSats were for a commercial or amateur project.[3] CubeSats have been built by large and small companies alike, while other projects have been the subject of Kickstarter campaigns.[4]

Uses typically involve experiments which can be miniaturized or serve purposes such as Earth observation or amateur radio. Many CubeSats are used to demonstrate spacecraft technologies that are targeted for use in small satellites or that present questionable feasibility and are unlikely to justify the cost of a larger satellite. Scientific experiments with questionable underlying theory may also find themselves aboard CubeSats as their low cost could justify riskier experiments. Biological research payloads have been flown on several missions, with more planned.[5] Several missions to the Moon and Mars are planning to use CubeSats.[6]


  • History 1
  • Design 2
    • Structure 2.1
    • Attitude control 2.2
    • Propulsion 2.3
      • Cold gas thrusters 2.3.1
      • Chemical propulsion 2.3.2
      • Electric propulsion 2.3.3
      • Solar sail 2.3.4
    • Power 2.4
    • Telecommunications 2.5
    • Costs 2.6
  • Notable past missions 3
  • Future projects 4
    • 2016 InSight mission: MarCO CubeSats 4.1
    • Cubesat Launch Initiative 4.2
  • Launch and deployment 5
    • Launch Systems 5.1
    • Deployment 5.2
  • See also 6
  • References 7
  • External links 8


1U CubeSat structure

The CubeSat reference design was proposed in 1999 by professors Jordi Puig-Suari of California Polytechnic State University and Bob Twiggs of Stanford University.[7][8]:159 The goal was to enable graduate students to be able to design, build, test and operate in space a spacecraft with capabilities similar to that of the first spacecraft, Sputnik. The CubeSat as initially proposed did not set out to become a standard; rather, it became a standard over time by a process of emergence. The first CubeSats were launched in June 2003 on a Russian Eurockot, and approximately 75 CubeSats had been placed into orbit by 2012.[9]

The need for such a small-factor satellite became apparent in 1998 as a result of work done at Stanford University's Space System Development Laboratory. At SSDL students had been working on the OPAL (Orbiting Picosatellite Automatic Launcher) microsatellite since 1995. OPAL's mission to deploy daughter-ship "picosatellites" had resulted in the development of a launcher system that was "hopelessly complicated" and could only be made to work "most of the time". With the project's delays mounting, Twiggs sought out DARPA funding that resulted in the redesign of the launching mechanism into a simple pusher plate concept with the satellites held in place by a spring-loaded door.[8]:151–157

Desiring to shorten the development cycle experienced on OPAL and inspired by the picosatellites OPAL carried, Twiggs set out to find "how much could you reduce the size and still have a practical satellite". The picosatellites on OPAL were 10.1×7.6×2.5 cm, a size that was not conducive to covering all sides of the spacecraft with solar cells. Inspired by a 4-inch cubic plastic box used to display Beanie Babies in stores, Twiggs first settled on the larger 10-centimeter cube as a guideline for the new (yet-to-be-named) CubeSat concept. A model of a launcher was developed for the new satellite using the same pusher plate concept that had been used in the modified OPAL launcher. Twiggs presented the idea to Puig-Suari in the summer of 1999 and then at the Japan-U.S. Science, Technology, and Space Applications Program (JUSTSAP) conference in November 1999.[8]:157–159

The term "CubeSat" was coined to denote nanosatellites that adhere to the standards described in the CubeSat design specification. Cal Poly published the standard in an effort led by aerospace engineering professor Jordi Puig-Suari.[10] Bob Twiggs, of the Department of Aeronautics & Astronautics at Stanford University, and currently a member of the space science faculty at Morehead State University in Kentucky, has contributed to the CubeSat community.[11] His efforts have focused on CubeSats from educational institutions.[12] The specification does not apply to other cube-like nanosatellites such as the NASA "MEPSI" nanosatellite, which is slightly larger than a CubeSat.


The CubeSat specification accomplishes several high-level goals. The main reason for miniaturizing satellites is to reduce the cost of deployment and are often suitable for launch in multiples, using the excess capacity of larger launch vehicles. The CubeSat design specifically minimizes risk to the rest of the launch vehicle and payloads. Encapsulation of the launcher–payload interface takes away the amount of work that would previously be required for mating a piggyback satellite with its launcher. Unification among payloads and launchers enables quick exchanges of payloads and utilization of launch opportunities on short notice.

Standard CubeSats are made up of 10×10×11.35 cm units designed to provide 10×10×10 cm or 1 liter of useful volume while weighing no more than 1.33 kg (2.9 lb) per unit. The smallest standard size is 1U and 3U is the largest which does not occupy allowed extra volumes.[2] The Aerospace Corporation has constructed and launched two smaller form CubeSats of 0.5U for radiation measurement and technological demonstration.[13] In recent years larger CubeSat platforms have been proposed, most commonly 6U (10×20×30 cm or 12×24×36 cm[14]) and 12U (20x20x30 cm or 24x24x36 cm[14]), to extend the capabilities of CubeSats beyond academic and technology validation applications and into more complex science and national defense goals. In 2014 two 6U Perseus-M CubeSats were launched for maritime surveillance, those two CubeSats represent the largest CubeSats flown as of 2015.

Scientist holding a CubeSat chassis

Since nearly all CubeSats are all 10×10 cm (regardless of length) they can all be launched and deployed using a common deployment system called a Poly-PicoSatellite Orbital Deployer (P-POD), developed and built by Cal Poly.[15]

No electronics form factors or communications protocols are specified or required by the CubeSat Design Specification, but COTS hardware has consistently utilized certain features which many treat as standards in CubeSat electronics. Most COTS and custom designed electronics fit the form of PC/104, which was not designed for CubeSats but presents a 90 × 96 mm profile that allows most of the spacecraft’s volume to be occupied. Technically, the PCI-104 form is the variant of PC/104 used[16] and the actual pinout used does not reflect the pinout specified in the PCI-104 standard. Stackthrough connectors on the boards allow for simple assembly and electrical interfacing and most manufacturers of CubeSat electronics hardware hold to the same signal arrangement, but some products do not and care must be taken to ensure consistent signal and power arrangements to prevent damage.[17]

Different classifications are used to categorize such miniature satellites based on mass.[18] 1U CubeSats belong to the genre of picosatellites.

  1. Minisatellite (100–500 kg)
  2. Microsatellite (10–100 kg)
  3. Nanosatellite (1–10 kg)
  4. Picosatellite (0.1–1 kg)
  5. Femtosatellite (0.01–0.1 kg)

Most CubeSats carry one or two scientific instruments as their primary mission payload.


The number of volumes classifies the size of CubeSats and according to the CubeSat Design Specification and are scalable along only one axis to fit the forms of 0.5U, 1U, 1.5U, 2U, or 3U. All the standard sizes of CubeSat have been built and launched, and represent the form factors for nearly all launched CubeSats as of 2015.[19] Materials used in the structure must feature the same coefficient of thermal expansion as the deployer to prevent jamming. Specifically allowed materials are four Aluminum alloys: 7075, 6061, 5005, and 5052. Aluminum used on the structure which contacts the P-POD must be anodized to prevent cold welding, and other materials may be used for the structure if a waiver is obtained.[2]

Protrusions beyond the maximum dimensions are allowed by the standard specification, to a maximum of 6.5mm beyond each side. Any protrusions may not interfere with the deployment rails and are typically occupied by antennas and solar panels. In Revision 13 of the CubeSat Design Specification an extra available volume was defined for use on 3U projects. The additional volume is made possible by space typically wasted in the P-POD Mk. III's spring mechanism. 3U CubeSats which utilize the space are designated 3U+ and may place components in a cylindrical volume centered on one end of the CubeSat. The cylindrical space has a maximum diameter of 6.4 cm and a height no greater than 3.6 cm while not allowing for any increase in mass beyond the 3U's maximum of 4 kg. Propulsion systems and antennas are the most common components that might require the additional volume, though the payload sometimes extends into this volume. Deviations from the dimension and mass requirements can be waived following application and negotiation with the launch service provider.[2]

Attitude control

Near-Earth Asteroid Scout concept: a controllable solar sail CubeSat
Attitude Determination & Control

(ADCS) for CubeSats relies on miniaturizing technology without significant performance degradation. Tumbling typically occurs as soon as a CubeSat is deployed, due to asymmetric deployment forces and bumping with other CubeSats. Some CubeSats operate normally while tumbling, but those that require pointing in a certain direction or cannot operate safely while spinning must be detumbled. Systems that perform attitude determination and control include reaction wheels, magnetorquers, thrusters, star trackers, sun sensors, earth sensors, angular rate sensors, and GPS receivers and antennas. Combinations of these systems are typically seen in order to take each method's advantages and mitigate their shortcomings. Reaction wheels are commonly utilized for their ability to impart relatively large moments for any given energy input, but reaction wheel's utility is limited due to saturation, the point at which a wheel cannot spin faster. Examples of CubeSat reaction wheels include the Maryland Aerospace MAI-101[20] and the Sinclair Interplanetary RW-0.03-4.[21] Reaction wheels can be desaturated with the use of thrusters or magnetorquers. Thrusters can provide large moments by imparting a couple on the spacecraft but inefficiencies in small propulsion systems cause thrusters to run out of fuel rapidly. Commonly found on nearly all CubeSats are magnetorquers which run electricity through a solenoid to take advantage of the Earth's magnetic field to produce a momentum. ADCS modules and solar panels typically feature built-in magnetorquers. For CubeSats that only need to detumble, no attitude determination method beyond an angular rate sensor or electronic gyroscope is necessary. Pointing in a specific direction is necessary for Earth observation, orbital maneuvers, maximizing solar power, and some scientific instruments. Directional pointing accuracy can be achieved by sensing the Earth and its horizon, the sun, or specific stars. Sinclair Interplanetary's SS-411 sun sensor[22] and ST-16 star tracker[23] both have applications for CubeSats and have flight heritage. Pumpkin's Colony I Bus uses an aerodynamic wing for passive attitude stabilization.[24] Determination of a CubeSat's location can be done through the use of on-board GPS, which is relatively expensive for a CubeSat, or by relaying radar tracking data to the craft from Earth-based tracking systems.


CubeSat propulsion has made rapid advancements in the following technologies: cold gas, chemical propulsion, electric propulsion, and solar sails. The biggest challenge with CubeSat propulsion is preventing risk to the primary payload while still providing significant capability.[25] Most propulsion systems require pressurized tanks (cold gas, some forms of chemical and electric propulsion) or hazardous propellants. The CubeSat Design Specification (CDS) requires a waiver to deviate from general requirements limiting propulsion systems to the following: less than 1.33 kg mass for 1U, up to 4.0 kg mass for 3U, pressurization less than 1.2 standard atmospheres, less than 100 W-Hr of stored chemical energy, and no hazardous materials.[2]

Cold gas thrusters

cold gas thruster uses a typically inert gas as the reaction mass, and usually consists of a pressurized tank, a valve to control its release and a nozzle, and plumbing connecting them. Examples of CubeSat cold gas thrusters are VACCO's PUC,[26] and Moog's 58E143.[27] Cold gas propulsion systems are very safe since the gases used do not have to be volatile or corrosive which is highly advantageous to CubeSats which are often restricted from hazardous materials. Unfortunately, only low performance can be achieved with them, preventing high impulse maneuvers even in low mass CubeSats.

Chemical propulsion

Chemical propulsion systems use a chemical reaction to produce a high-pressure, high-temperature gas that accelerates out of a nozzle. Chemical propellant can be liquid, solid or a hybrid of both. Liquid propellants can be a monopropellant passed through a catalyst, or bipropellant (a mix of oxidizer and fuel). The benefits of monopropellants are relatively low-complexity/high-thrust output, low power requirements, and high reliability. Examples of chemical propulsion for CubeSats include Experiment Propulsion Lab's AM Motor,[28] Aerojet's MPS-120 hydrazine thruster,[29] and Busek's green monopropellant thruster.[30] Another example is hydrogen propulsion by on-orbit electrolysis of water.[31]

Electric propulsion

Busek's BIT-3 ion thruster proposed for NASA's Lunar IceCube mission

Electric propulsion uses electromagnetics or electrostatics to expel propellant (reaction mass) at high speed. Electric thrusters typically use much less propellant than chemical rockets because they have a higher exhaust speed (operate at a higher specific impulse) than chemical rockets, and can enable interplanetary travel for CubeSats.[32] Examples of electric propulsion include hall effect thrusters, ion thrusters, electrospray thrusters, and pulsed plasma thrusters. A student-led project at Duke University proposes to use electrospray propulsion to propel a CubeSat to Mars,[33][34] and NASA's Lunar IceCube proposes to use the Busek BIT-3 ion thruster to achieve lunar orbit.[35]

Solar sail

Solar sails (also called light sails or photon sails) are a form of spacecraft propulsion using the radiation pressure (also called solar pressure) from stars to push large ultra-thin mirrors to high speeds, requiring no propellant. Several CubeSats employ a solar sail as its main propulsion and stability in deep space, including the 3U NanoSail-D2 launched in 2010, the LightSail-1 scheduled for launch in April 2016,[36][37] and the proposed Near-Earth Asteroid Scout (NEA Scout).[38] The ESTCube-1 used an electric solar-wind sail.


Winglet solar panels increase surface area and power generation

CubeSats use solar cells to convert solar light to electricity that is then stored in rechargeable lithium-ion batteries that provide power during eclipse as well as during peak load times.[39] These satellites have a limited surface area on their external walls for solar cells assembly, and has to be effectively shared with other parts, such as antennas, optical sensors, camera lens, propulsion systems, and access port. Lithium-ion batteries feature high energy-to-mass ratios making them well suited to use on mass-restricted spacecraft. Battery charging and discharging is typically handled by a dedicated electrical power system (EPS). Batteries sometimes feature heaters[40] to prevent the battery from reaching dangerously low temperatures which might cause battery and mission failure.[41] Missions with higher power requirements can make use of attitude control to ensure the solar panels remain in their most effective orientation toward the sun, and further power needs can be met through the addition and orientation of deployed solar arrays. Recent innovations include additional spring-loaded solar arrays that deploy as soon as the satellite is released, as well as arrays that feature thermal knife mechanisms that would deploy the panels when commanded. CubeSats may not be powered between launch and deployment, and must feature a remove before flight pin which cuts all power to prevent operation during loading into the P-POD. Additionally, a deployment switch is actuated while the craft is loaded into a P-POD, cutting power to the spacecraft and is deactivated after exiting the P-POD.[2]


The low cost of CubeSats has enabled unprecedented access to space for smaller institutions and organizations but, for most CubeSat forms, the range and available power is limited to about 2W for its communications antennae.[18][42] They can use radio-communication systems in the VHF, UHF, L-, S-, C- and X-band.[18] For UHF/VHF transmissions, a single helical antenna or four monopole antennae are deployed by a spring-loaded mechanism.[18][42]

Because of tumbling and low power range, radio-communications are a challenge. Many CubeSats use an omnidirectional monopole or dipole antenna built with commercial measuring tape. For more demanding needs, some companies offer high-gain antennae for CubeSats, but their deployment and pointing systems are significantly more complex.[18][42] For example, MIT and JPL are developing an inflatable dish antenna with a useful range to the Moon.[43]


CubeSat forms a cost-effective independent means of getting a payload into orbit.[10] With their relatively small size, 1U CubeSats could each be made and launched to low Earth orbit (LEO) for an estimated cost (2014) of $65,000 to $80,000. After delays from low-cost launchers such as Interorbital Systems,[44] by 2015 launch prices have been about $100,000 per unit,[45][46] plus less than $50,000 to construct a basic 1U CubeSat.[47] This price tag, far lower than most satellite launches, has made CubeSat a viable option for schools and dozens of universities and some companies around the world to develop their own CubeSats. Some CubeSats have complicated components or instruments, such as LightSail-1, which pushes their construction cost into the millions.[48]

Notable past missions

NanoRacks CubeSats being launched from the NanoRacks CubeSat Deployer on the ISS on February 25, 2014.

One of the earliest CubeSat launches was on 30 June 2003 from Plesetsk, Russia, with Eurockot Launch Services's Multiple Orbit Mission. CubeSats were put into a Sun-synchronous orbit and included the Danish AAU CubeSat and DTUSat, the Japanese XI-IV and CUTE-1, the Canadian Can X-1, and USA's Quakesat.[49]

On February 13, 2012, three PPODs deployers containing seven CubeSats were placed into orbit along with the Lares satellite aboard an Avio Vega rocket launched from French Guyana. The CubeSats launched were e-st@r (Politecnico di Torino, Italy), Goliat (University of Bucarest, Romania), Masat-1 (Budapest University of Technology and Economics, Hungary), PW-Sat (Warsaw University of Technology, Poland), Robusta (University of Montpellier 2, France), UniCubeSat-GG (University of Rome La Sapienza, Italy), and XaTcobeo (University of Vigo and INTA, Spain).[50]

On September 13, 2012, eleven CubeSats were launched from eight P-PODs, as part of the "OutSat" secondary payload aboard a United Launch Alliance Atlas V rocket.[51] This was the largest number of CubeSats (and largest volume of 24U) successfully placed to orbit on a single launch, this was made possible by use of the new NPS CubeSat Launcher system (NPSCuL) developed at the Naval Postgraduate School (NPS). The following CubeSats were placed in orbit: SMDC-ONE 2.2 (Baker), SMDC-ONE 2.1 (Able), AeroCube 4.0(x3), Aeneas, CSSWE, CP5, CXBN, CINEMA, and Re (STARE).[52]

Five CubeSats (Raiko, Niwaka, We-Wish, TechEdSat, F-1) were placed into orbit from the International Space Station on October 4, 2012, as a technology demonstration of small satellite deployment from the ISS. They were launched and delivered to ISS as a cargo of Kounotori 3, and an ISS astronaut prepared the deployment mechanism attached to Japanese Experiment Module's robotic arm.[53][54][55]

ESTCube-1 is the first satellite in history to use an electric solar wind sail (E-Sail)

Four CubeSats were deployed from the Cygnus Mass Simulator, which was launched April 21, 2013 on the maiden flight of Orbital Sciences' Antares rocket.[56] Three of them are 1U PhoneSats built by NASA's Ames Research Center to demonstrate the use of smart phones as avionics in CubeSats. The fourth was a 3U satellite, called Dove-1, built by Planet Labs.

The working principles of the theoretical electric solar wind sail (E-Sail) propulsion underwent successful testing in 7 May 2013 with the ESTCube-1, developed as part of the Estonian Student Satellite Program. During the ESTCube-1 flight, 10 meters of 20–50 micrometer thick E-Sail wire were deployed from the satellite to affect the attitude control.[57] To control the E-Sail element's interaction with both the plasma surrounding the Earth and the effect it has on the spacecraft's spinning speed, the students adapted two miniaturized electron emitters connected to the E-Sail element which it loads positively to 500 volts by shooting out electrons. The positive ions in the plasma push the E-Sail element and influence the satellite's rotation speed.

Diagram showing LightSail's orbital configuration

A total of thirty-three CubeSats were deployed from the ISS on February 11, 2014. Of those thirty-three, twenty-eight were part of the Flock-1 constellation of Earth-imaging CubeSats. Of the other five, two are from other US-based companies, two from Lithuania, and one from Peru.[58]

The LightSail-A is a 3U CubeSat prototype propelled by a solar sail. It was launched on 20 May 2015 from Florida. Its four sails are made of very thin Mylar and have a total area of 32 m2. This test will allow a full checkout of the satellite's systems in advance of the main 2016 mission.[59]

Future projects

An ambitious project is the QB50, an international network of 50 CubeSats for multi-point, in-situ measurements in the lower thermosphere (90–350 km) and re-entry research. QB50 is an initiative of the Von Karman Institute and is funded by the European Union. Double-unit (2U) CubeSats (10×10×20 cm) are foreseen, with one unit (the 'functional' unit) providing the usual satellite functions and the other unit (the 'science' unit) accommodating a set of standardised sensors for lower thermosphere and re-entry research. 35 CubeSats are envisaged to be provided by universities in 19 European countries, 10 by universities in the US, 2 by universities in Canada, 3 by Japanese universities, 1 by an institute in Brazil, and others. Ten 2U or 3U CubeSats are foreseen to serve for in-orbit technology demonstration of new space technologies. All 50 CubeSats will be launched together on a single Cyclone-4 launch vehicle in February 2016.[60] The Request for Proposals (RFP) for the QB50 CubeSat was released on February 15, 2012.

2016 InSight mission: MarCO CubeSats

The 2016 launch of the InSight stationary lander to Mars, will include two CubeSats to flyby Mars to provide additional relay communications from InSight to Earth during entry and landing. This will be the first flight of CubeSats in deep space. The mission CubeSat technology is called Mars Cube One (MarCO), a six-unit CubeSat, 14.4 inches (36.6 centimeters) by 9.5 inches (24.3 centimeters) by 4.6 inches (11.8 centimeters). Marco is an experiment, but not necessary for the InSight mission, to add relay communications to space missions in important time durations, in this landing from the time of InSight atmospheric entry and landing.

MarCO will launch in March 2016 from Vandenberg Air Force Base, California on the same Atlas V rocket as the InSight lander. The two CubeSats will separate from the Atlas V booster after launch and then travel in their own trajectories to Mars. After separation, MarCO will deploy two radio antennas and two solar panels. The high-gain, X-band antenna is a flat panel to direct radio waves. MarCO will navigate to Mars independently from the InSight lander, making their own course adjustments on the flight. MarCO will fly by Mars while InSight is landing in September 2016.

During InSight's planned entry, descent and landing (EDL) in September 2016, the lander will transmit information in the UHF radio band to NASA's Mars Reconnaissance Orbiter (MRO) flying overhead. MRO will forward EDL information to Earth using a radio frequency in the X band, but cannot simultaneously receive information in one band if transmitting on another. Confirmation of a successful landing could be received on Earth several hours after, so MarCO would be a technology demonstration of real-time telemetry during the landing.[61][62][63]

Cubesat Launch Initiative

NASA created in 2010 the 'Cubesat Launch Initiative' that aims to provide access to space for CubeSats developed by educational institutions and non-profit organizations.[64] Selected experiments fly as auxiliary payloads on NASA rocket launches or are deployed from the International Space Station.[65]

Launch and deployment

A Dnepr rocket launching from ISC Kosmotras

Unlike full-sized spacecraft, CubeSats have the ability to be delivered into space as cargo and then deployed by the International Space Station. This presents an alternative method of achieving orbit apart from launch and deployment by a launch vehicle. NanoRacks and Made in Space are developing means of constructing CubeSats on the International Space Station.[66]

Launch Systems

NASA has launched more than 30 CubeSats over the last several years, and as of 2015, it has a backlog of more than 50 awaiting launch.[67] No matter how inexpensive or versatile CubeSats may be, they must hitch rides as secondary payload on large rockets launching much larger spacecraft, at prices starting around $100,000.[67]

SpaceX[68][69] and Japan Manned Space Systems Corporation (JAMSS)[70][71] are two recent companies that offer commercial launch services for CubeSats as secondary payload, but a launch backlog still exists. Meanwhile, India's ISRO has been commercially launching foreign CubeSats since 2009 as secondary payloads.[72]

Very few companies and research institutes offer regular launch opportunities in clusters of several cubes. ISC Kosmotras and Eurokot are two companies that offer such services.[73]

On 5 May 2015, NASA announced a program based at the Kennedy Space Center dedicated to develop a new class of rockets designed specifically to launch very small satellites: the NASA Venture Class Launch Services (VCLS),[67][74][75] which will offer a payload mass of 30 kg to 60 kg for each launcher.[74][76] Five months later, in October 2015, NASA awarded a total of $17.1 million to three separate startup launch companies for one flight each: $6.9 million to Rocket Lab (Electron rocket); $5.5 million to Firefly Space Systems (Alpha rocket); and $4.7 million to Virgin Galactic (LauncherOne rocket).[77] The payloads for the three flights under the VCLS contract have not yet been assigned.[77]


P-PODs were designed with CubeSats to provide a common platform for secondary payloads. P-PODs are mounted to a launch vehicle and carry CubeSats into orbit and deploy them once the proper signal is received from the launch vehicle. The P-POD Mk III has capacity for three 1U CubeSats, or other 0.5U, 1U, 1.5U, 2U, or 3U CubeSats combination up to a maximum volume of 3U.[78] Other CubeSat deployers exist, with the NanoRacks CubeSat Deployer (NRCSD) on the International Space Station being the most popular method of CubeSat deployment as of 2014.[3] Some CubeSat deployers are created by companies, such as the ISIPOD (Innovative Solutions In Space BV) or SPL (Astro und Feinwerktechnik Adlershof GmbH), while some have been created by governments or other non-profit institutions such as the X-POD (University of Toronto), T-POD (University of Tokyo), or the J-SSOD (JAXA) on the International Space Station.[79] While the P-POD is limited to launching a 3U CubeSat at most, the NRCSD can launch a 6U (10×10×68.1 cm) CubeSat and the ISIPOD can launch a different form of 6U CubeSat (10×22.63×34.05 cm).

Chasqui I

was deployed by hand during a spacewalk on the International Space Station in 2014.

See also


  1. ^ "NASA Venture Class procurement could nurture, ride small sat trend". Space News. 8 June 2015. 
  2. ^ a b c d e f Mehrparvar, Arash (February 20, 2014). "CubeSat Design Specification" (PDF). The CubeSat Program, CalPoly SLO. The CubeSat Program, CalPoly SLO. Retrieved September 2015. 
  3. ^ a b c "CubeSat Database - swartwout". Retrieved 2015-10-19. 
  4. ^
  5. ^ "Tiny Satellites for Big Science - Astrobiology Magazine". Astrobiology Magazine (in en-US). Retrieved 2015-10-20. 
  6. ^ "Tiny Cubesats Set to Explore Deep Space". Retrieved 2015-10-20. 
  7. ^ Messier, Douglas (22 May 2015). "Tiny 'Cubesats' Gaining Bigger Role in Space". Retrieved 2015-05-23. 
  8. ^ a b c Helvajian, Henry; Janson, Siegfried W., eds. (2008). Small Satellites: Past, Present, and Future. El Segundo, Calif.: Aerospace Press.  
  9. ^ "Cubist Movement". Space News. 2012-08-13. p. 30. When professors  
  10. ^ a b Leonard David (2004). "CubeSats: Tiny Spacecraft, Huge Payoffs".  
  11. ^ Rob Goldsmith (October 6, 2009). "Satellite pioneer joins Morehead State's space science faculty".  
  12. ^ Leonard David (2006). "CubeSat losses spur new development".  
  13. ^ "AeroCube 6A, 6B (CubeRad A, B)". Retrieved 2015-10-18. 
  14. ^ a b The official standard only defines up to 3U and 3U+ (a slightly larger but same-mass 3U). Larger sizes use have varying definitions depending on source. There is some confusion about 3U and 1U: the official standard claims a 3U masses at most 4 kg, while Spaceflight Services claims (see ) that 3U extends to 5 kg.
  15. ^ "Educational Payload on the Vega Maiden Flight – Call For CubeSat Proposals" (PDF).  
  16. ^ "PCI/104-Express - PC/104 Consortium". PC/104 Consortium (in en-US). Retrieved 2015-10-22. 
  17. ^ "FAQ". Retrieved 2015-10-22. 
  18. ^ a b c d e Kakoyiannis, Constantine; Constantinou, Philip. Electrically Small Microstrip Antennas Targeting (PDF). Microstrip Antennas. Greece: National Technical University of Athens. 
  19. ^ "CubeSat". Retrieved 2015-10-18. 
  20. ^ "Maryland Aerospace Reaction Wheels". Retrieved September 4, 2015. 
  21. ^ "Sinclair Interplanetary Reaction Wheels". Retrieved September 4, 2015. 
  22. ^ "Sinclair Interplanetary Sun Sensors". Retrieved September 4, 2015. 
  23. ^ "Sinclair Interplanetary Star Trackers". Retrieved September 4, 2015. 
  24. ^ Kalman, Andrew (4 Nov 2009). "Pumkin's Colony I CubeSat Bus" (PDF). Retrieved September 4, 2015. 
  25. ^ Frost, Chad (February 2014). "Small Spacecraft Technology State of the Art" (PDF). NASA. NASA Ames. Retrieved September 4, 2015. 
  26. ^ "VACCO" (PDF). 
  27. ^ Bzibziak, R (Oct 2000). "Update of Cold Gas Propulsion at MOOG". Spacecraft Propulsion, Third International Conference.  
  28. ^ Dushku, Matthew (August 14, 2012). "Additively Manufactured Propulsion System". 26th Annual AIAA/USU Conference on Small Satellites. Retrieved 4 Sep 2015. 
  29. ^ "Aerojet CubeSat Thrusters". Aerojet Rocketdyne. Retrieved September 4, 2015. 
  30. ^ "Busek Green monopropellant thruster". Busek Space Propulsion. Busek. Retrieved September 4, 2015. 
  31. ^ "HYDROS - Water Electrolysis Thruster". Tethers Unlimited, Inc. 2015. Retrieved 2015-06-10. 
  32. ^ Frost, Chad (Feb 2014). "Small Spacecraft Technology State of the Art" (PDF). NASA. NASA Ames. Retrieved September 4, 2015. 
  33. ^ "Mars missions on the cheap". The Space Review (USA). 5 May 2014. Retrieved 2015-05-21. 
  34. ^ "ion Electrospray Propulsion System for CubeSats (iEPS)". Space Propulsion Laboratory. Massachusetts Institute of Technology. Retrieved 2015-05-21. 
  35. ^ "Lunar IceCube to Take on Big Mission from Small Package". NASA. 2015. Retrieved 2015-09-01. 
  36. ^ Louis D. Friedman (June 25, 2010). "LightSail-1 Passes Critical Design Review". The Planetary Society. 
  37. ^ Davis, Jason (10 July 2014). "LightSail update: Launch dates".  
  38. ^ McNutt, Leslie; Castillo-Rogez, Julie (2014). "Near-Earth Asteroid Scout" (PDF). NASA. American Institute of Aeronautics and Astronautics. Retrieved 2015-05-13. 
  39. ^ "CubeSats: Power System and Budget Analysis". DIY Space Exploration. 2015. Retrieved 2015-05-22. 
  40. ^ "Batteries". The CubeSat Cookbook (in en-US). Retrieved 2015-10-20. 
  41. ^ "Lithium Battery Failures". Retrieved 2015-10-20. 
  42. ^ a b c Ochoa, Daniel (2014). "Deployable Helical Antenna for Nano-Satellite" (PDF). Northrop Grumman Aerospace Systems. Retrieved 2015-05-21. 
  43. ^ Chu, Jennifer (6 September 2015). "Inflatable antennae could give CubeSats greater reach". MIT News (USA). Retrieved 2015-05-21. 
  44. ^ As noted in the linked article, Interorbital promised its Neptune 45 – intended to carry 10 CubeSats, among other cargo – would launch in 2011, but as of 2014 it had yet to do so.
  45. ^ "OSSI-1 Amateur Radio CubeSat launched". Southgate Amateur Radio News. 2013. Retrieved 2014-07-07. 
  46. ^ "Commerical Space Launch Schedule and Pricing". Spaceflight (in en-US). Retrieved 2015-10-18. 
  47. ^ "Cubesats explained and why you should build one". DIY Space Exploration (in en-US). Retrieved 2015-10-18. 
  48. ^ "After letdown, solar-sail project rises again". Retrieved 2015-10-18. 
  49. ^ "EUROCKOT Successfully Launches MOM – Rockot hits different Orbits".  
  50. ^  
  51. ^  
  52. ^ NRO (June 2012). "NROL-36 Features Auxiliary Payloads" (PDF). National Reconnaissance Office. Retrieved March 21, 2013. 
  53. ^ Kuniaki Shiraki (March 2, 2011). "「きぼう」からの小型衛星放出に係る技術検証について" [On Technical Verification of Releasing Small Satellites from "Kibo"] (PDF) (in Japanese).  
  54. ^ Mitsumasa Takahashi (June 15, 2011). "「きぼう」からの小型衛星放出実証ミッションに係る搭載小型衛星の選定結果について" (PDF). JAXA. Retrieved June 18, 2011. 
  55. ^ "「きぼう」日本実験棟からの小型衛星放出ミッション" (in Japanese). JAXA. October 5, 2012. Retrieved December 1, 2012. 
  56. ^ "Antares Test Launch "A-ONE Mission" Overview Briefing" (PDF). Orbital Sciences. 17 April 2013. Retrieved 18 April 2013. 
  57. ^ "Proba-V’s fellow passenger" (PDF). European Space Agency. February 2013. p. 17. Retrieved March 25, 2013. 
  58. ^ Debra Werner (February 11, 2014). "Planet Labs CubeSats Deployed from ISS with Many More To Follow". SpaceNews, Inc. Retrieved March 8, 2014. 
  59. ^ Davis, Jason (January 26, 2015). "It's Official: LightSail Test Flight Scheduled for May 2015".  
  60. ^ "QB50".  
  61. ^ "NASA Prepares for First Interplanetary CubeSat Mission". Retrieved 2015-06-12. 
  62. ^ "JPL | CubeSat". Retrieved 2015-06-12. 
  63. ^ "InSight". Retrieved 2015-06-12. 
  64. ^ Mahoney, Erin. "CubeSat Launch initiative (CSLI)". Retrieved 2015-08-12. 
  65. ^ Wall, Mike (11 August 2015). "NASA Offers Rocket Rides for Tiny Cubesats". NASA News ( Retrieved 2015-08-12. 
  66. ^ "In-Space Satellite Construction May Be Coming Soon". Retrieved 2015-10-21. 
  67. ^ a b c Dean, James (16 May 2015). "NASA seeks launchers for smallest satellites". Florida Today. Retrieved 2015-05-16. 
  68. ^ Stephen Clark (2009). "Commercial launch of SpaceX Falcon 1 rocket a success". Spaceflight Now. Retrieved 2010-07-13. 
  69. ^ "CubeSATs launched with SpaceX". Citizen Inventor. 18 April 2014. Retrieved 2015-05-22. 
  70. ^ "Spaceflight Partners with Japan Manned Space Systems Corporation (JAMSS) to Launch Eight CubeSats on the JAXA Astro-H Mission". Spaceflight. 5 November 2014. Retrieved 2015-05-22. 
  71. ^ "Brazilian AESP-14 CubeSat was deployed from Kibo". JAXA. 5 February 2015. Retrieved 2015-05-22. AESP-14 takes an opportunity of Kibo's paid utilization and is deployed by Japan Manned Space Systems Corporation (JAMSS) at the request of Brazilian Space Agency. 
  72. ^ "ISRO launches CubeSats". Indian Space Research Organisation. 2009. Retrieved 2015-05-22. 
  73. ^ Jos Heyman (2009). "FOCUS: CubeSats — A Costing + Pricing Challenge". SatMagazine. Retrieved 2009-12-30. 
  74. ^ a b Wolfinger, Rob (5 May 2015). "NASA Solicitations: VENTURE CLASS LAUNCH SERVICE - VCLS, SOL NNK15542801R". NASA. Retrieved 2015-05-16. 
  75. ^ Diller, George H. (7 May 2015). "NASA Hosts Media Call on Draft Solicitation for New Class of Launch Services". NASA. Retrieved 2015-05-16. 
  76. ^ "NASA Issues Request for Proposals for Cubesat Launches". NASA (SpaceRef). 12 June 2015. Retrieved 2015-06-15. 
  77. ^ a b Wall, Mike (14 October 2015). "NASA Picks New Rocket Rides to Launch Small Satellites". Retrieved 2015-10-15. 
  78. ^ Matthew Richard Crook (2009). "NPS CubeSat Launcher Design, Process And Requirements" (PDF).  
  79. ^ "CubeSat concept - eoPortal Directory - Satellite Missions". Retrieved 2015-10-19. 

External links

  • Cubesat introduction, 2-minute video, DIYspace.
  • CubeSat Program official website Contains information about upcoming launches.
  • Amsat's list of CubeSats Generally kept well up to date
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from World eBook Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.