World Library  
Flag as Inappropriate
Email this Article

Deicing boot

Article Id: WHEBN0003535203
Reproduction Date:

Title: Deicing boot  
Author: World Heritage Encyclopedia
Language: English
Subject: Icing conditions, Leading edge, Boot (disambiguation), Ice protection system, Tupolev Tu-80
Collection: Aircraft Ice Protection Systems
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Deicing boot

The black rubber deicing boot on the wing of a Bombardier Dash 8 Q400 passenger aircraft is inflated with air, producing ridges to crack and dislodge any accumulated ice
Operation of deicing boots
De-icing rubber boots on the leading edge of a Beechcraft 350

A deicing boot is a type of ice protection system installed on aircraft surfaces to permit a mechanical deicing in flight. Such boots are generally installed on the leading edges of wings and control surfaces (e.g. horizontal and vertical stabilizer) as these areas are most likely to accumulate ice and any contamination could severely affect the aircraft's performance.

Deicing boots were invented by the B.F. Goodrich Corporation in 1923 in Akron, Ohio. In its quest to develop deicing boots, the company built a large indoor facility in Akron to replicate bad weather and icing on aircraft wings.[1][2]

Contents

  • Design 1
  • Alternatives 2
  • References 3
  • External links 4

Design

A deicing boot consists of a thick rubber membrane that is installed over the surface to be deiced. As atmospheric icing occurs and ice builds up, a pneumatic system inflates the boot with compressed air. This expansion in size cracks any ice that has accumulated, and this ice is blown away into the airflow. The boots are then deflated to return the wing or surface to its optimal shape.

Boots need to be replaced frequently (on the order of 2–3 years), and require proper care. Holes in the boot may create air leaks that will decrease the effectiveness of the boots. As such, boots must be carefully inspected before each flight and any holes or cuts must be patched.

Alternatives

The use of deicing boots may enable an aircraft to be certified for flight into known icing conditions. However, they may not be sufficient to handle extremely severe icing, where ice can accumulates faster than the boots can shed it, or it accumulates on non-booted surfaces to the point where it there is a a dangerous loss of lift or control, or increase in weight.

Deicing boots are most commonly seen on medium-sized airliners and utility aircraft. Larger airliners and military jets tend to use heating systems within the wing, keeping it constantly warm and preventing ice from forming. Sources of heat include:

  • Bleed air systems use high-temperature, compressed air from the engine compressor sections, and duct it towards the sections to be de-iced where it delivers its heat before being released into the airflow.
  • Electrothermal systems pass electric current through resistive parts, usually the leading edges themselves. These systems require substantial electrical power and are generally used on large aircraft, such as the 787.

References

  1. ^ "Artificial Blizzards Help To Protect Planes", February 1931, Popular Mechanics illustration of blizzard machine and how de-icing boots work
  2. ^ "Overshoes For Planes End Ice Danger", November 1931, Popular Science bottom of page 28

External links

  • Investigations of Performance of Pneumatic Deicing Boots, Surface Ice Detectors, and Scaling of Intercycle Ice, FAA report, November 2006
  • Aircraft Deicing and Anti-icing Equipment, AOPA Air Safety Foundation, Oct 2004
  • NTSB Warns Pilots To Use De-Icing Boots Early, AVWeb, Dec 2008
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 



Copyright © World Library Foundation. All rights reserved. eBooks from World eBook Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.