World Library  
Flag as Inappropriate
Email this Article

Frequency offset

Article Id: WHEBN0024759117
Reproduction Date:

Title: Frequency offset  
Author: World Heritage Encyclopedia
Language: English
Subject: PAL-S, Distortionmeter, Television lines, White clipper, Skew (antenna)
Publisher: World Heritage Encyclopedia

Frequency offset

In radio engineering, a frequency offset is an intentional slight shift of broadcast radio frequency (RF), to reduce interference with other transmitters.


The most important problem encountered in broadcasting via terrestrial transmitters is the interference from other broadcasters. In principle, each broadcaster has a different radio frequency (planned by the public authority) in a common reception area to avoid interference from each other. However still there are two problems: spurious radiation of adjacent channels and fringe reception.

Fringe reception is unintended reception under certain weather conditions. The exceptionally long-range reception means that the receiver may be tuned to more than one transmitter (transmitting at same frequency) at the same time. These transmitters may transmit programs of different broadcasters as well as the programs of the same broadcaster. In analogue transmission, even the transmitters transmitting the very same program interfere each other because of phase differences of the incoming signal, but in digital transmission the transmitters transmitting the same program in the same channel may reinforce each other.

The shift in RF

In order to reduce the interference from the fringe area transmitters transmitting in the same channels, a method named frequency offset is often used. By this method, a slightly shifted RF is assigned for a transmitter which may be interfered by other transmitters.

In TV transmission, the shifted RF is calculated by the formula;

f_{os} = f_{ch} + \frac{f_L\cdot p}{12}


f_{os} is the offset RF,
f_{ch} is the standard channel frequency,
p is an integer such that -12
f_L is the line frequency. ( 15625 Hz. for 625-line systems, 15750 Hz. for System M and System J and 20475 Hz. for system E)

Precision offset is the same as frequency offset, except that in this case, the offset frequency is produced by a cesium controlled oscillator.


8p offset of channel 9 in system B can be found readily

The standard visual carrier frequency is 203.25 MHz The line frequency is 15 625 Hz.

f_{os} = 203 250 000 + \frac{15626\cdot 8}{12} \approx 203260417

8n offset of the same channel is likewise

f_{os} = 203 250 000 - \frac{15626\cdot 8}{12} \approx 203239583
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from World eBook Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.