World Library  
Flag as Inappropriate
Email this Article

Ground stone

Article Id: WHEBN0000147190
Reproduction Date:

Title: Ground stone  
Author: World Heritage Encyclopedia
Language: English
Subject: Lithic analysis, Grinding slab, Mano (stone), Adze, Tool stone
Collection: Lithics, Neolithic
Publisher: World Heritage Encyclopedia

Ground stone

An array of Neolithic artifacts, including bracelets, axe heads, chisels, and polishing tools. Neolithic stone implements are by definition polished and, except for specialty items, not chipped.
A Neolithic ground stone.
Traditional grinding stone used for making chutney, dosa batter and idli batter, in India today.

In archaeology, ground stone is a category of stone tool formed by the grinding of a coarse-grained tool stone, either purposely or incidentally. Ground stone tools are usually made of basalt, rhyolite, granite, or other cryptocrystalline and igneous stones whose coarse structure makes them ideal for grinding other materials, including plants and other stones.


  • Origin 1
  • Creation 2
  • Uses 3
  • See also 4
  • References 5


The adoption of ground stone technology is associated closely with the Neolithic, also called the New Stone Age. The Stone Age comes from the three-age system developed by Christian Jürgensen Thomsen. In the Levant ground stones appear in Mesolithic 2 (Natufian). In prehistoric Japan, ground stone tools appear during the Japanese Paleolithic, possibly predating adoption elsewhere in the Neolithic by 25,000 years.[1]


Ground stones were created and used for a wide variety of reasons. Each use resulted in a different development and process by which a person created their ground stone. For example, the process for creating the head of a hammer is different from the process used to create a detailed decoration piece for one’s home. That being said, there are some processes that are basic to most ground stone making. When choosing what type of stone to use for a ground stone tool, toughness is the most important factor. If the stone is not tough enough to withstand hard hits and instead just flakes and cracks easily, the work done to create the tool has gone to waste. A stone that will not shear, flake, or crack when tested against large impacts is the most important aspect when choosing what kind of stone to use. Examples of this kind of stone include limestone, sandstone, granite, obsidian, basalt, rhyolite and other igneous and cryptocrystalline rocks.

Cryptocrystalline rocks are good to use for ground stones because they have a very fine grain structure. This is helpful because the smaller the grains are in a rock, the harder the rock is.

Obsidian was one of the most highly sought after types of rock for making ground stones. It forms when molten magma cools very rapidly. It is commonly referred to as volcanic glass. Obsidian was so popular for ground stones because of how it fractures conchoidally. Conchoidal fracture leaves behind very sharp edges when pieces of the rock are shorn off. This creates a piece of rock that can be used to cut through many things, including animal hide, shrubbery, and farm crop. Other kinds of rock that fracture conchoidally include flint and quartzite.

The process of grinding down a larger stone into a ground stone that can be used for a practical purpose is called lithic reduction or flintknapping. The development of a ground stone tool is a very tedious, precise, and labor-intensive progression. It takes lots of practice and repetition to become a master flintknapper. Lithic reduction utilizes a few different tools. First, a hard hammer, called a hammerstone, is used to knock off larger pieces of the stone that are not useful for the particular tool. The hard hammer stone tool is made of stone that’s hard and rough, so it can take off large pieces without an extreme amount of force.

A soft hammer stone tool is then used to grind down the stone with less force. This tool is usually made of a much softer material like bone, antler, or wood. A soft hammer tool would most likely have a more rounded end compared to the hammerstone. This allows for more precise reduction in the stone.

Pressure flaking is an even more precise way of grinding off pieces of stone than soft hammer. With use of a soft hammer tool, pressured punches on the stone while being held with a piece of gripping material.

Throughout the lithic reduction process, the pieces of stone that are knocked off of the larger stone create many different shapes. Pieces of the stone that are knocked off are called debitage. Removed pieces that come off in longer and sharp pieces are called blades. Blades can be used for other uses because they are sharp and usually strong. Flakes are larger pieces that are knocked off of the stone.

Holes could be ground out of stones with the use of sharp pointed stones or hardened sticks. By spinning the ground stone with one's hands and applying substantial pressure to the sharp point into the ground stone, a hole could be drilled into the stone with a large amount of time and effort. Sand would be used to help quicken the process by putting it in the partially formed hole as the sharp point was being pressed. The sand would help grind more of the stone away. To put a hole all the way through a piece of stone, it would be first drilled half way in one direction and be finished on the opposite side.

The process of lithic reduction will vary for each ground stone tool that is made. Furthermore, each piece will need different amounts of time to complete depending what is used.

Some ground stone tools are incidental, caused by use with other tools: manos, for example, are hand stones used in conjunction with metates and other grinding slabs (querns), and develop their ground surfaces through wear. Other ground stone tools include adzes, celts, and axes, which are manufactured using a labor-intensive, time-consuming method of repeated grinding against a harder stone or with sand, often using water as a lubricant. These tools are often made using durable finer-grained materials rather than coarse materials. In the North American arctic, tools made of ground slate were used by the Norton, Dorset, and Thule tool cultures. Common forms of these tools were projectile points and ulus. These were formed when larger blades were shorn off stones being made for another purpose. The blades could then be used to form other useful tools.


When making the head of an axe out of stone, the piece would be made so it could be hafted. In order to have the stone hafted onto a larger piece, like wood or bone, the ground stone may have at least two notches ground out of one side of the stone, making grooves for the hafting material to lie inside. These grooves would ensure that the stone would not move when struck with a large force. Tough hide would then be wound around the handle and inside the grooves, binding the ground stone and the handle together.

Ground stones were often used as dinner wear. Using large stones, lithic reduction would be done for long periods of time to create bowls and pots for food. Jewelry, beads, ear spools and other decorative ground stones were a sign of high status due to the time and effort needed to make pieces of such small size and detail.

When mashing up seeds and leaves into powders, rounded and smooth ground stones would be used inside a stone bowl. This pair of tools is called a mortar and pestle. The material would be placed into the mortar and the pestle would be moved and pressed into the mortar to grind the material into a fine powder. This process could be used for medicine and cooking. Mortar and pestle is still used today for many cooking recipes.

See also


  1. ^ "Prehistoric Japan, New perspectives on insular East Asia", Keiji Imamura, University of Hawaii Press, Honolulu, ISBN 0-8248-1853-9
  • Banning, Edward Bruce. The archaeologist's laboratory: the analysis of archaeological data. Kluwer Academic/Plenum Publishers, New York. 2000, p. 151.
  • Bender, Tricia R. "Ground Stone Artifacts: Series in Ancient Technologies: The Office of the State Archaeologist at The University of Iowa since 1959." Ground Stone Artifacts: Series in Ancient Technologies: The Office of the State Archaeologist at The University of Iowa since 1959. N.p., n.d. Web. 17 Nov. 2013. .
  • Fagan, Brian. Ancient North America. Thames & Hudson, London. 2005, p. 191-99.
  • Moore, D.T., 1983, Petrological aspects of some sharpening stones, touchstones, and milling stones. In The Petrology of Archaeological Artefaces. Clarendon Press, Oxford.
  • "Native Americans:Historic:The Illinois:Technology:Tools:Ground Stone." Native Americans:Historic:The Illinois:Technology:Tools:Ground Stone. N.p., n.d. Web. 18 Nov. 2013. .
  • Sepp, Siim. "Conchoidal Fracture." Sandatlas. N.p., n.d. Web. 18 Nov. 2013. .
  • Wright, Katherine. "Craft Production and the Organization of Ground Stone Technologies." London's Global University. N.p., n.d. Web. 18 Nov. 2013.
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from World eBook Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.