World Library  
Flag as Inappropriate
Email this Article

Gurney flap

Article Id: WHEBN0002963961
Reproduction Date:

Title: Gurney flap  
Author: World Heritage Encyclopedia
Language: English
Subject: Auto racing equipment, 1971 introductions, Daytona Prototype, Dan Gurney, Bobby Unser
Collection: 1971 Introductions, Aircraft Wing Components, Auto Racing Equipment
Publisher: World Heritage Encyclopedia

Gurney flap

A gurney flap shown on the underside of a Newman airfoil (from NASA Technical Memorandum 4071).

The Gurney Flap (or wickerbill) is a small tab projecting from the trailing edge of a wing. Typically it is set at a right angle to the pressure side surface of the airfoil,[1] and projects 1% to 2% of the wing chord.[2] This trailing edge device can improve the performance of a simple airfoil to nearly the same level as a complex high-performance design.[3]

The device operates by increasing pressure on the pressure side, decreasing pressure on the suction side, and helping the boundary layer flow stay attached all the way to the trailing edge on the suction side of the airfoil.[4] Common applications occur in auto racing, helicopter horizontal stabilizers, and aircraft where high lift is essential, such as banner-towing airplanes.[5]


  • History 1
  • Theory of operation 2
  • Helicopter applications 3
  • See also 4
  • References 5
  • External links 6


The "variable lift airfoil" shown in Figure-1 of the 1935 E.F. Zaparka patent, U.S. Patent Re19,412. It is a movable microflap, similar to the fixed Gurney flap.
A Gurney flap on the trailing edge of the rear wing of a Porsche 962.

The original application, by automobile racing icon Dan Gurney (who was challenged to do so by fellow racer Bobby Unser), was a right-angle piece of sheet metal, rigidly fixed to the top trailing edge of the rear wing on his open wheel racing cars of the early 1970s. The device was installed pointing upwards to increase downforce generated by the wing, improving traction.[4] He field tested it and found it allowed a car to negotiate turns at higher speed, while also achieving higher speed in the straight sections of the track.[6]

The first application of the flap was in 1971,[7] after Gurney retired from driving and began managing his own racing team full-time. His driver, Bobby Unser, had been testing a new Gurney-designed car at Phoenix International Raceway, and was unhappy with the car's performance on the track. Gurney needed to do something to restore his driver's confidence before the race, and recalled experiments conducted in the 1950s by certain racing teams with spoilers affixed to the rear of the bodywork to cancel lift. (At that level of development, the spoilers were not thought of as potential performance enhancers—merely devices to cancel out destabilizing and potentially deadly aerodynamic lift.) Gurney decided to try adding a "spoiler" to the trailing edge of the rear wing.[8] The device was fabricated and fitted in under an hour, but Unser's test laps with the modified wing turned in equally poor times. When Unser was able to speak to Gurney in confidence, he disclosed that the lap times with the new wing were slowed because it was now producing so much downforce that the car was understeering. All that was needed was to balance this by adding additional downforce in front.[9]

Unser realized the value of this breakthrough immediately and wanted to conceal it from the competition, including his brother Al. Not wanting to call attention to the devices, Gurney left them out in the open.[10] To conceal his true intent, Gurney deceived inquisitive competitors by telling them the blunted trailing edge was intended to prevent injury and damage when pushing the car by hand. Some copied the design, and some of them even "improved" it by pointing the flap downwards, which actually hurt performance.[11]

Gurney was able to use the device in racing for several years before its true purpose became known. Later, he discussed his ideas with aerodynamicist and wing designer Bob Liebeck of Douglas Aircraft Company. Liebeck tested the device, which he later named the "Gurney flap," and confirmed Gurney’s field test results using a 1.25% chord flap on a Newman symmetric airfoil.[12] His 1976 AIAA paper (76-406) "On the design of subsonic airfoils for high lift" introduced the concept to the aerodynamics community.[13] The Gurney flap is the first aerodynamic development made in automobile racing that has been transferred to aircraft engineering.[11]

Gurney assigned his patent rights to Douglas Aircraft,[9] but the device was not patentable, since it was substantially similar to a movable microflap patented by E.F. Zaparka in 1931, ten days before Gurney was born.[9][14] Similar devices were also tested by Gruschwitz and Schrenk[15] and presented in Berlin in 1932.[16]

Theory of operation

The Gurney flap increases the maximum lift coefficient (CL,max), decreases the angle of attack for zero lift (α0), and increases the nosedown pitching moment (CM), which is consistent with an increase in camber of the airfoil.[4] It also typically increases the drag coefficient (Cd),[17] especially at low angles of attack,[18] although for thick airfoils, a reduction in drag has been reported.[19] A net benefit in overall lift to drag ratio is possible if the flap is sized appropriately based on the boundary layer thickness.[20]

The Gurney flap increases lift by altering the Kutta condition at the trailing edge.[4][6] The wake behind the flap is a pair of counter-rotating vortices that are alternately shed in a von Kármán vortex street.[21] In addition to these spanwise vortices shed behind the flap, chordwise vortices shed from in front of the flap become important at high angles of attack.[5]

The increased pressure on the lower surface ahead of the flap means the upper surface suction can be reduced while producing the same lift.[21]

Helicopter applications

Double Gurney flaps on a Bell 222U helicopter

Gurney flaps have found wide application on helicopter horizontal stabilizers, because they operate over a very wide range of both positive and negative angles of attack. At one extreme, in a high-powered climb, the negative angle of attack of the horizontal stabilizer can be as high as -25°; at the other extreme, in autorotation, it may be +15°. As a result, at least half of all modern helicopters built in the West have them in one form or another.[22]

The Gurney flap was first applied to the Sikorsky S-76B variant,[11] when flight testing revealed the horizontal stabilizer from the original S-76 did not provide sufficient lift. Engineers fitted a Gurney flap to the NACA 2412 inverted airfoil to resolve the problem without redesigning the stabilizer from scratch.[11] A Gurney flap was also fitted to the Bell JetRanger to correct an angle of incidence problem in the design that was too difficult to correct directly.[11][22]

The Eurocopter AS355 TwinStar helicopter uses a double Gurney flap that projects from both surfaces of the vertical stabilizer. This is used to correct a problem with lift reversal in thick airfoil sections at low angles of attack.[11] The double gurney flap reduces the control input required to transition from hover to forward flight.[22]

See also


  1. ^ Van Dam, C.P.; Yen, D.T.; Vijgen, P. (1999). "Gurney flap experiments on airfoil and wings". Journal of Aircraft(0021-8669) 36 (2): 484–486.  
  2. ^ Storms, B.L.; Jang, C.S. (1994). "Lift Enhancement of an Airfoil Using a Gurney Flap and Vortex Generators". Journal of Aircraft 31 (3): 542–547.  
  3. ^ Giguere, P.; Lemay, J.; Dumas, G. (1995). "Gurney flap effects and scaling for low-speed airfoils". AIAA Applied Aerodynamics Conference, 13 th, San Diego, CA, Technical Papers. Pt. 2. pp. 966–976. through the proper use of Gurney flaps, the aerodynamic performance of a simple design, easy-to-build airfoil can be made practically as well as those of a modern, high performance, complex design. 
  4. ^ a b c d Myose, R.; Papadakis, M.; Heron, I. (1998). "Gurney flap experiments on airfoils, wings, and reflection plane model". Journal of Aircraft 35 (2): 206–211.  
  5. ^ a b Troolin, D.R.; Longmire, E.K.; Lai, W.T. (2006). "Time resolved PIV analysis of flow over a NACA 0015 airfoil with Gurney flap" (PDF). Experiments in Fluids 41 (2): 241–254.  
  6. ^ a b Jang, C.S.; Ross, J.C.; Cummings, R.M. (1998). "Numerical investigation of an airfoil with a Gurney flap". Aircraft Design 1 (2): 75–88.  
  7. ^ Troolin,, Daniel R.; Ellen K. Longmire; Wing T. Lai (2006-06-26). "The Effect of Gurney Flap Height on Vortex Shedding Modes Behind Symmetric Airfoils". 13th Int. Symp. on Applications of Laser Techniques to Fluid Mechanics. Lisbon, Portugal,. 
  8. ^ Wagner, Jan R. (2004). "The 2004 Art Center Car Classic (Part Two): Dan Gurney on Racing and the "BLAT" Effect". Auto Matters. Retrieved 2007-07-06. 'And I remembered having spent a lot of time with these little tabs on the back, or spoilers and so forth, and I thought to myself – well, I wonder if one would work on a wing? We already had wings on these in 1971. Sure enough, that was the beginning of the Gurney flap.' 
  9. ^ a b c Howard, Keith (September 2000). "Gurney Flap". Motorsport Magazine. Once Gurney had confirmed they were alone, Unser told him the rear was now so well planted that the car was pushing (understeering) badly, hence the poor lap times. 
  10. ^ Unser, Bobby (2004). Winners Are Driven. New York: Wiley. p. 15.  
  11. ^ a b c d e f Houghton, E. (2003). Aerodynamics for Engineering Students. Boston: Butterworth Heinemann. pp. 500–502.  
  12. ^ Myose, R.; Heron, I.; Papadakis, M. (1996). "Effect of Gurney flaps on a NACA 0011 Airfoil". AIAA Paper: 96–0059. Retrieved 2007-07-08. Liebeck conducted wind tunnel tests on the effect of a 1.25% chord height Gurney flap. He used a Newman-type airfoil, which had an elliptic nose and a straight line wedge for the rear section. 
  13. ^ Schatz, M.; Gunther, B.; Thiele, F. (2004). "Computational Modeling of the Unsteady Wake Behind Gurney Flaps". AIAA Paper 2417. Retrieved 2007-07-06. The first theoretical investigations were published by Liebeck who introduced the concept of trailing edge devices to aircraft aerodynamics. 
  14. ^ Sobieczky, H. (2003). "Gurney Flaps in Transonic Flows". Iutam Symposium Transsonicum IV. Henning Rosemann and Kai Richter. Berlin: Springer. p. 165.  
  15. ^ Zerihan, J.; Zhang, X. (2001). "Aerodynamics of Gurney flaps on a wing in ground effect". AIAA Journal 39 (5): 772–780.  
  16. ^ Gruschwitz, Eugen; Oskar Schrenk (1932-10-28). "Über eine einfache Möglichkeit zur Auftriebserhöhung von Tragflügeln (A simple method for increasing the lift of airplane wings by means of flaps)" (PDF). Zeitschrift für Flugtechnik und Motorluftschiffahrt. Wissenschaftliche Gesellschaft für Luftfahrt (21st 1932 Berlin). vol. 23, no. 20 (Translation by Dwight M. Miner ed.). Washington, June 1933:  
  17. ^ Jang, C.S.; Ross, J.C.; Cummings, R.M. (1992). "Computational evaluation of an airfoil with a Gurney flap". AIAA Paper: 92–2708. Retrieved 2007-07-07. 
  18. ^ Bloy, A.W.; Tsioumanis, N.; Mellor, N.T. (1997). "Enhanced aerofoil performance using small trailing-edge flaps". Journal of Aircraft(0021-8669) 34 (4): 569–571.  
  19. ^ Neuhart, Dan H.; Pendergraft, Odis C., Jr (1988-11-01). "A water tunnel study of Gurney flaps" (PDF). NASA  
  20. ^ Giguere, P.; Dumas, G.; Lemay, J. (1997). "T echnical N otes". AIAA Journal 35: 12. Retrieved 2007-07-07. 
  21. ^ a b Meyer, R.; Hage, W.; Bechert, D.W. (2006). "Drag Reduction on Gurney Flaps by Three-Dimensional Modification" (PDF). Journal of Aircraft 43 (1): 132.  
  22. ^ a b c Prouty, R.W. (2000-03-01). "Aerodynamics : The Gurney Flap, Part 2". Rotor & Wing (Access Intelligence). One of the critical flight conditions is a high-powered climb. The negative angle of attack of the horizontal stabilizer can be as high as -25°, whereas in autorotation it may be +15°. 

External links

  • U.S. Patent Re19,412 the original 1935 Zaparka patent
  • Camocardi, Mauricio E. (26 April 2012). "Control de flujo sobre la estela cercana de perfiles aerodinámicos mediante la implementación de mini-flaps Gurney". p. 111. Retrieved 28 April 2014. 
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from World eBook Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.