World Library  
Flag as Inappropriate
Email this Article

Layer 2 Tunneling Protocol

Article Id: WHEBN0000350705
Reproduction Date:

Title: Layer 2 Tunneling Protocol  
Author: World Heritage Encyclopedia
Language: English
Subject: Virtual private network, IPsec, Transport layer, Transport Layer Security, L2TPv3
Collection: Internet Protocols, Internet Standards, Tunneling Protocols, Virtual Private Networks
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Layer 2 Tunneling Protocol

In computer networking, Layer 2 Tunneling Protocol (L2TP) is a tunneling protocol used to support virtual private networks (VPNs) or as part of the delivery of services by ISPs. It does not provide any encryption or confidentiality by itself. Rather, it relies on an encryption protocol that it passes within the tunnel to provide privacy.[1]

Contents

  • History 1
  • Description 2
  • Tunneling models 3
  • L2TP packet structure 4
  • L2TP packet exchange 5
  • L2TP/IPsec 6
  • Windows implementation 7
  • L2TP in ISPs' networks 8
  • See also 9
  • References 10
  • External links 11
    • Implementations 11.1
    • Internet standards and extensions 11.2
    • Other 11.3

History

Published in 1999 as proposed standard RFC 2661, L2TP has its origins primarily in two older tunneling protocols for point-to-point communication: Cisco's Layer 2 Forwarding Protocol (L2F) and Microsoft's[2] Point-to-Point Tunneling Protocol (PPTP). A new version of this protocol, L2TPv3, appeared as proposed standard RFC 3931 in 2005. L2TPv3 provides additional security features, improved encapsulation, and the ability to carry data links other than simply Point-to-Point Protocol (PPP) over an IP network (for example: Frame Relay, Ethernet, ATM, etc.).

Description

The entire L2TP packet, including payload and L2TP header, is sent within a User Datagram Protocol (UDP) datagram. It is common to carry PPP sessions within an L2TP tunnel. L2TP does not provide confidentiality or strong authentication by itself. IPsec is often used to secure L2TP packets by providing confidentiality, authentication and integrity. The combination of these two protocols is generally known as L2TP/IPsec (discussed below).

The two endpoints of an L2TP tunnel are called the LAC (L2TP Access Concentrator) and the LNS (L2TP Network Server). The L2TP waits for new tunnels. Once a tunnel is established, the network traffic between the peers is bidirectional. To be useful for networking, higher-level protocols are then run through the L2TP tunnel. To facilitate this, an L2TP session (or 'call') is established within the tunnel for each higher-level protocol such as PPP. Either the LAC or LNS may initiate sessions. The traffic for each session is isolated by L2TP, so it is possible to set up multiple virtual networks across a single tunnel. MTU should be considered when implementing L2TP.

The packets exchanged within an L2TP tunnel are categorized as either control packets or data packets. L2TP provides reliability features for the control packets, but no reliability for data packets. Reliability, if desired, must be provided by the nested protocols running within each session of the L2TP tunnel.

L2TP allows the creation of a virtual private dialup network (VPDN)[3] to connect a remote client to its corporate network by using a shared infrastructure, which could be the Internet or a service provider's network.

Tunneling models

An L2TP tunnel can extend across an entire PPP session or only across one segment of a two-segment session. This can be represented by four different tunneling models, namely:

  • voluntary tunnel
  • compulsory tunnel — incoming call
  • compulsory tunnel — remote dial
  • L2TP multihop connection[4]

L2TP packet structure

An L2TP packet consists of :

Bits 0–15 Bits 16–31
Flags and Version Info Length (opt)
Tunnel ID Session ID
Ns (opt) Nr (opt)
Offset Size (opt) Offset Pad (opt)......
Payload data

Field meanings:

Flags and version
control flags indicating data/control packet and presence of length, sequence, and offset fields.
Length (optional)
Total length of the message in bytes, present only when length flag is set.
Tunnel ID
Indicates the identifier for the control connection.
Session ID
Indicates the identifier for a session within a tunnel.
Ns (optional)
sequence number for this data or control message, beginning at zero and incrementing by one (modulo 216) for each message sent. Present only when sequence flag set.
Nr (optional)
sequence number for expected message to be received. Nr is set to the Ns of the last in-order message received plus one (modulo 216). In data messages, Nr is reserved and, if present (as indicated by the S bit), MUST be ignored upon receipt..
Offset Size (optional)
Specifies where payload data is located past the L2TP header. If the offset field is present, the L2TP header ends after the last byte of the offset padding. This field exists if the offset flag is set.
Offset Pad (optional)
Variable length, as specified by the offset size. Contents of this field are undefined.
Payload data
Variable length (Max payload size = Max size of UDP packet − size of L2TP header)

L2TP packet exchange

At the time of setup of L2TP connection, many control packets are exchanged between server and client to establish tunnel and session for each direction. One peer requests the other peer to assign a specific tunnel and session id through these control packets. Then using this tunnel and session id, data packets are exchanged with the compressed PPP frames as payload.

The list of L2TP Control messages exchanged between LAC and LNS, for handshaking before establishing a tunnel and session in voluntary tunneling method are

L2TP/IPsec

Because of the lack of confidentiality inherent in the L2TP protocol, it is often implemented along with IPsec. This is referred to as L2TP/IPsec, and is standardized in IETF RFC 3193. The process of setting up an L2TP/IPsec VPN is as follows:

  1. Negotiation of IPsec security association (SA), typically through Internet key exchange (IKE). This is carried out over UDP port 500, and commonly uses either a shared password (so-called "pre-shared keys"), public keys, or X.509 certificates on both ends, although other keying methods exist.
  2. Establishment of Encapsulating Security Payload (ESP) communication in transport mode. The IP protocol number for ESP is 50 (compare TCP's 6 and UDP's 17). At this point, a secure channel has been established, but no tunneling is taking place.
  3. Negotiation and establishment of L2TP tunnel between the SA endpoints. The actual negotiation of parameters takes place over the SA's secure channel, within the IPsec encryption. L2TP uses UDP port 1701.

When the process is complete, L2TP packets between the endpoints are encapsulated by IPsec. Since the L2TP packet itself is wrapped and hidden within the IPsec packet, no information about the internal private network can be garnered from the encrypted packet. Also, it is not necessary to open UDP port 1701 on firewalls between the endpoints, since the inner packets are not acted upon until after IPsec data has been decrypted and stripped, which only takes place at the endpoints.

A potential point of confusion in L2TP/IPsec is the use of the terms tunnel and secure channel. The term tunnel refers to a channel which allows untouched packets of one network to be transported over another network. In the case of L2TP/PPP, it allows L2TP/PPP packets to be transported over IP. A secure channel refers to a connection within which the confidentiality of all data is guaranteed. In L2TP/IPsec, first IPsec provides a secure channel, then L2TP provides a tunnel.

Windows implementation

Windows Vista provides two new configuration utilities that attempt to make using L2TP without IPsec easier, both described in sections that follow below:

  • an MMC snap-in called "Windows Firewall with Advanced Security"WFwAS), located in Control Panel → Administrative Tools
  • the "netsh advfirewall" command-line tool

Both these configuration utilities are not without their difficulties, and unfortunately, there is very little documentation about both "netsh advfirewall" and the IPsec client in WFwAS. One of the aforementioned difficulties is that it is not compatible with NAT. Another problem is that servers must be specified only by IP address in the new Vista configuration utilities; the hostname of the server cannot be used, so if the IP address of the IPsec server changes, all clients will have to be informed of this new IP address (which also rules out servers that addressed by utilities such as DynDNS).

L2TP in ISPs' networks

L2TP is often used by ISPs when internet service over for example ADSL or cable is being resold. From the end user, packets travel over a wholesale network service provider's network to a server called a Broadband Remote Access Server (BRAS), a protocol converter and router combined. On legacy networks the path from end user customer premises' equipment to the BRAS may be over an ATM network. From there on, over an IP network, an L2TP tunnel runs from the BRAS (acting as LAC) to an LNS which is an edge router at the boundary of the ultimate destination ISP's IP network. See example of reseller ISPs using L2TP.

See also

References

  1. ^ IETF (1999), RFC 2661, Layer Two Tunneling Protocol "L2TP"
  2. ^ "Point-to-Point Tunneling Protocol (PPTP)". TheNetworkEncyclopedia.com. 2013. Retrieved 2014-07-28. Point-to-Point Tunneling Protocol (PPTP) [:] A data-link layer protocol for wide area networks (WANs) based on the Point-to-Point Protocol (PPP) and developed by Microsoft that enables network traffic to be encapsulated and routed over an unsecured public network such as the Internet. 
  3. ^ http://www.cisco.com/en/US/tech/tk801/tk703/technologies_tech_note09186a0080094586.shtml
  4. ^ http://publib.boulder.ibm.com/infocenter/iseries/v7r1m0/index.jsp?topic=%2Frzaiy%2Frzaiymultihop.htm

External links

Implementations

  • Cisco: Cisco L2TP documentation, also read Technology brief from Cisco
  • Open source and Linux: xl2tpd, Linux RP-L2TP, OpenL2TP, l2tpns, l2tpd (inactive), Linux L2TP/IPsec server, FreeBSD multi-link PPP daemon, OpenBSD npppd(8), ACCEL-PPP - PPTP/L2TP/PPPoE server for Linux
  • Microsoft: built-in client included with Windows 2000 and higher; Microsoft L2TP/IPsec VPN Client for Windows 98/Windows Me/Windows NT 4.0
  • Apple: built-in client included with Mac OS X 10.3 and higher.
  • VPDN on Cisco.com

Internet standards and extensions

  • RFC 2341 Cisco Layer Two Forwarding (Protocol) "L2F" (a predecessor to L2TP)
  • RFC 2637 Point-to-Point Tunneling Protocol (PPTP) (a predecessor to L2TP)
  • RFC 2661 Layer Two Tunneling Protocol "L2TP"
  • RFC 2809 Implementation of L2TP Compulsory Tunneling via RADIUS
  • RFC 2888 Secure Remote Access with L2TP
  • RFC 3070 Layer Two Tunneling Protocol (L2TP) over Frame Relay
  • RFC 3145 L2TP Disconnect Cause Information
  • RFC 3193 Securing L2TP using IPsec
  • RFC 3301 Layer Two Tunnelling Protocol (L2TP): ATM access network
  • RFC 3308 Layer Two Tunneling Protocol (L2TP) Differentiated Services
  • RFC 3355 Layer Two Tunnelling Protocol (L2TP) Over ATM Adaptation Layer 5 (AAL5)
  • RFC 3371 Layer Two Tunneling Protocol "L2TP" Management Information Base
  • RFC 3437 Layer Two Tunneling Protocol Extensions for PPP Link Control Protocol Negotiation
  • RFC 3438 Layer Two Tunneling Protocol (L2TP) Internet Assigned Numbers: Internet Assigned Numbers Authority (IANA) Considerations Update
  • RFC 3573 Signaling of Modem-On-Hold status in Layer 2 Tunneling Protocol (L2TP)
  • RFC 3817 Layer 2 Tunneling Protocol (L2TP) Active Discovery Relay for PPP over Ethernet (PPPoE)
  • RFC 3931 Layer Two Tunneling Protocol - Version 3 (L2TPv3)
  • RFC 4045 Extensions to Support Efficient Carrying of Multicast Traffic in Layer-2 Tunneling Protocol (L2TP)
  • RFC 4951 Fail Over Extensions for Layer 2 Tunneling Protocol (L2TP) "failover"

Other

  • IANA assigned numbers for L2TP
  • L2TP Extensions Working Group (l2tpext) - (where future standardization work is being coordinated)
  • Using Linux as an L2TP/IPsec VPN client
  • L2TP/IPSec with OpenBSD and npppd
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 



Copyright © World Library Foundation. All rights reserved. eBooks from World eBook Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.