The shape of the universe is the local and global geometry of the Universe, in terms of both curvature and topology (though, strictly speaking, the concept goes beyond both). The shape of the universe is related to general relativity which describes how spacetime is curved and bent by mass and energy.
There is a distinction between the observable universe and the global universe. The observable universe consists of the part of the universe that can, in principle, be observed due to the finite speed of light and the age of the universe. The observable universe is understood as a sphere around the Earth extending 93 billion light years (8.8 *10^{26} meters) and would be similar at any observing point (assuming the universe is indeed isotropic , as it appears to be from our vantage point).
According to the book Our Mathematical Universe, the shape of the global universe can be explained with three categories:^{[1]}

Finite or infinite

Flat (no curvature), open (negative curvature) or closed (positive curvature)

Connectivity, how the universe is put together, i.e., simply connected space or multiply connected.
There are certain logical connections among these properties. For example, a universe with positive curvature is necessarily finite.^{[2]} Although it is usually assumed in the literature that a flat or negatively curved universe is infinite, this need not be the case if the topology is not the trivial one.^{[2]}
The exact shape is still a matter of debate in physical cosmology, but experimental data from various, independent sources (WMAP, BOOMERanG and Planck for example) confirm that the observable universe is flat with only a 0.4% margin of error.^{[3]}^{[4]}^{[5]} Theorists have been trying to construct a formal mathematical model of the shape of the universe. In formal terms, this is a 3manifold model corresponding to the spatial section (in comoving coordinates) of the 4dimensional spacetime of the universe. The model most theorists currently use is the socalled Friedmann–Lemaître–Robertson–Walker (FLRW) model. Arguments have been put forward that the observational data best fit with the conclusion that the shape of the global universe is infinite and flat,^{[6]} but the data are also consistent with other possible shapes, such as the socalled Poincaré dodecahedral space^{[7]}^{[8]} and the Picard horn.^{[9]}
Contents

Shape of Observable Universe 1

Curvature of Universe 2

Global Universe Structure 3

Infinite or finite 3.1

Bounded and Unbounded 3.1.1

Curvature 3.2

Universe with zero curvature 3.2.1

Universe with positive curvature 3.2.2

Universe with negative curvature 3.2.3

Curvature: Open or closed 3.2.4

Milne model ("spherical" expanding) 3.2.5

See also 4

References 5

External links 6
Shape of Observable Universe
Slices through the
Sloan Digital Sky Survey 3dimensional map of the distribution of galaxies with the Earth at the center, an example of an experimental attempt to catalog the observable universe.
As stated in the introduction, there are two aspects to consider:

its local geometry, which predominantly concerns the curvature of the universe, particularly the observable universe, and

its global geometry, which concerns the topology of the universe as a whole.
The observable universe can be thought of as a sphere that extends outwards from any observation point for 93 billion light years, going farther back in time and more redshifted the more distant away one looks. Ideally, one can continue to look back all the way to the Big Bang, however, in practice the farthest away one can look is the cosmic microwave background (CMB) as anything past that was opaque. Experimental investigations show that the observable universe is very close to isotropic and homogeneous.
If the observable universe encompasses the entire universe, we may be able to determine the global structure of the entire universe by observation. However, if the observable universe is smaller than the entire universe, our observations will be limited to only a part of the whole, and we may not be able to determine its global geometry through measurement. From experiments, it is possible to construct different mathematical models of the global geometry of the entire universe all of which are consistent with current observational data and so it is currently unknown whether the observable universe is identical to the global universe or it is instead many orders of magnitude smaller than it. The universe may be small in some dimensions and not in others (analogous to the way a cuboid is longer in the dimension of length than it is in the dimensions of width and depth). To test whether a given mathematical model describes the universe accurately, scientists look for the model's novel implications—what are some phenomena in the universe that we have not yet observed, but that must exist if the model is correct—and they devise experiments to test whether those phenomena occur or not. For example, if the universe is a small closed loop, one would expect to see multiple images of an object in the sky, although not necessarily images of the same age.
Cosmologists normally work with a given spacelike slice of spacetime called the comoving coordinates, the existence of a preferred set of which is possible and widely accepted in presentday physical cosmology. The section of spacetime that can be observed is the backward light cone (all points within the cosmic light horizon, given time to reach a given observer), while the related term Hubble volume can be used to describe either the past light cone or comoving space up to the surface of last scattering. To speak of "the shape of the universe (at a point in time)" is ontologically naive from the point of view of special relativity alone: due to the relativity of simultaneity we cannot speak of different points in space as being "at the same point in time" nor, therefore, of "the shape of the universe at a point in time".
Curvature of Universe
The curvature of space is a mathematical description of whether or not the Pythagorean theorem is valid for spatial coordinates. There are three possible curvatures the universe can have.

Flat (A drawn triangle's angles add up to 180°)

Positively curved (A drawn triangle's angles add up to more than 180°)

Negatively curved (A drawn triangle's angles add up to less than 180°)
An example of a flat curvature would be any Euclidean geometry, e.g., a triangle drawn on a flat piece of paper.
Curved geometries are in the domain of NonEuclidean geometry. An example of a positively curved surface would be drawing on the surface of a sphere. Drawing a triangle on the equator to a pole gives each angle 90°, giving a total of 270° for a triangle. An example of a negative curved surface would be drawing a triangle on a saddle or mountain pass, the curving away as the triangle moves away from the center gives a smaller angle, and the sum of the angles would add up to less than 180°.
The local geometry of the universe is determined by whether the
density parameter Ω is greater than, less than, or equal to 1.
From top to bottom: a
spherical universe with
Ω > 1, a
hyperbolic universe with
Ω < 1, and a
flat universe with
Ω = 1. Note that these depictions of twodimensional surfaces are merely easily visualizable analogs to the 3dimensional structure of (local) space.
General relativity explains that mass and energy bend the curvature of spacetime and is used to determine what curvature the universe has by using a value called the density parameter, represented with Omega (Ω). The density parameter is the average density of the universe divided by the critical energy density, that is, the mass energy needed for a universe to be flat. Put another way

If Ω = 1, the universe is flat

If Ω > 1, there is positive curvature

if Ω < 1 there is negative curvature
The geometry of the universe is usually represented in the system of comoving coordinates, according to which the expansion of the universe can be ignored. Comoving coordinates form a single frame of reference according to which the universe has a static geometry of three spatial dimensions.
Under the assumption that the universe is homogeneous and isotropic, the curvature of the observable universe, or the local geometry, is described by one of the three "primitive" geometries (in mathematics these are called the model geometries):
One can experimentally calculate this Ω to determine the curvature two ways. One is to count up all the massenergy in the universe and divided by the critical energy density. Data from Wilkinson Microwave Anisotropy Probe (WMAP) as well as the Planck spacecraft give values for the three constitutes of all the massenergy in the universe  normal mass (baryonic matter and dark matter), relativistic particles (photon and neutrinos) and dark energy or the cosmological constant:^{[10]}^{[11]}
\Omega_{mass} \approx 0.315 \pm 0.018
\Omega_{relativistic} \approx 9.24 * 10^{5}
\Omega_{\Lambda} \approx 0.6817 \pm 0.0018
\Omega_{total} = \Omega_{mass} + \Omega_{relativistic} + \Omega_{\Lambda} = 1.00 \pm 0.02
The actual value for critical density value is measured as \rho_{critical} = 9.47 *10^{27} kg/m^3. From these values, it seems that within experimental error, the universe seems to be flat.
Another way to measure Ω is to do so geometrically by measuring an angle across the observable universe. We can do this by using the CMB and measuring the power spectrum and temperature anisotropy. For an intuition, one can imagine finding a gas cloud that is not in thermal equilibrium due to being so large that light speed cannot propagate the information of the thermal information. Knowing this propagation speed, we then know the size of the gas cloud as well as the distance to the gas cloud, we then have two sides of a triangle and can then determine the angles. Using a method similar to this, the BOOMERanG experiment has determined that the sum of the angles to 180° within experimental error, corresponding to an \Omega_{total} \approx 1.00 \pm 0.12.^{[12]}
These and other astronomical measurements constrain the spatial curvature to be very close to zero, although they do not constrain its sign. This means that although the local geometries of spacetime are generated by the theory of relativity based on spacetime intervals, we can approximate 3space by the familiar Euclidean geometry.
The Friedmann–Lemaître–Robertson–Walker (FLRW) model using Friedmann equations is commonly used to model the universe. The FLRW model provides a curvature of the universe based on the mathematics of fluid dynamics, that is, modeling the matter within the universe as a perfect fluid. Although stars and structures of mass can be introduced into an "almost FLRW" model, a strictly FLRW model is used to approximate the local geometry of the observable universe. Another way of saying this is that if all forms of dark energy are ignored, then the curvature of the universe can be determined by measuring the average density of matter within it, assuming that all matter is evenly distributed (rather than the distortions caused by 'dense' objects such as galaxies). This assumption is justified by the observations that, while the universe is "weakly" inhomogeneous and anisotropic (see the largescale structure of the cosmos), it is on average homogeneous and isotropic.
Global Universe Structure
Global structure covers the geometry and the topology of the whole universe—both the observable universe and beyond. While the local geometry does not determine the global geometry completely, it does limit the possibilities, particularly a geometry of a constant curvature. The universe is often taken to be a geodesic manifold, free of topological defects; relaxing either of these complicates the analysis considerably. A global geometry is a local geometry plus a topology. It follows that a topology alone does not give a global geometry: for instance, Euclidean 3space and hyperbolic 3space have the same topology but different global geometries.
As stated in the introduction, investigations within the study of global structure of include

Whether the universe is infinite or finite in extent

Whether the geometry of the global universe is flat, positively curved, or negatively curved

Whether the topology is simply connected like a sphere or multiply connected, like a torus
Infinite or finite
One of the presently unanswered questions about the universe is whether it is infinite or finite in extent. For intuition, it can be understood that a finite universe has a finite volume that, for example, could be in theory filled up with a finite amount of material, while an infinite universe is unbounded and no numerical volume could possibly fill it. Mathematically, the question of whether the universe is infinite or finite is referred to as boundedness. An infinite universe (unbounded metric space) means that there are points arbitrarily far apart: for any distance d, there are points that are of a distance at least d apart. A finite universe is a bounded metric space, where there is some distance d such that all points are within distance d of each other. The smallest such d is called the diameter of the universe, in which case the universe has a welldefined "volume" or "scale."
Bounded and Unbounded
Assuming a finite universe, the universe can either have an edge or no edge. Many finite mathematical spaces, e.g., a disc, have an edge or boundary. Spaces that have an edge are difficult to treat, both conceptually and mathematically. Namely, it is very difficult to state what would happen at the edge of such a universe. For this reason, spaces that have an edge are typically excluded from consideration.
However, there exist many finite spaces, such as the 3sphere and 3torus, which have no edges. Mathematically, these spaces are referred to as being compact without boundary. The term compact basically means that it is finite in extent ("bounded") and is a closed set. The term "without boundary" means that the space has no edges. Moreover, so that calculus can be applied, the universe is typically assumed to be a differentiable manifold. A mathematical object that possess all these properties, compact without boundary and differentiable, is termed a closed manifold. The 3sphere and 3torus are both closed manifolds.
An infinite universe (or infinite in a specific spatial direction) must be unbounded in that direction.
Curvature
The curvature of the universe places constraints on the topology. If the spatial geometry is spherical, i.e., possess positive curvature, the topology is compact. For a flat (zero curvature) or a hyperbolic (negative curvature) spatial geometry, the topology can be either compact or infinite.^{[13]} It's very important to note that many textbooks erroneously state that a flat universe implies an infinite universe; however, the correct statement is that a flat universe that is also simply connected implies an infinite universe.^{[13]} For example, Euclidean space is flat, simply connected and infinite, but the torus is flat, multiply connected, finite and compact.
In general, local to global theorems in Riemannian geometry relate the local geometry to the global geometry. If the local geometry has constant curvature, the global geometry is very constrained, as described in Thurston geometries.
The latest research shows that even the most powerful future experiments (like SKA, Planck..) will not be able to distinguish between flat, open and closed universe if the true value of cosmological curvature parameter is smaller than 10^{−4}. If the true value of the cosmological curvature parameter is larger than 10^{−3} we will be able to distinguish between these three models even now.^{[14]}
Results of the Planck mission released in 2015 show the cosmological curvature parameter, Ω_{K}, to be 0.000±0.005, coincident with a flat universe.^{[15]}
Universe with zero curvature
In a universe with zero curvature, the local geometry is flat. The most obvious global structure is that of Euclidean space, which is infinite in extent. Flat universes that are finite in extent include the torus and Klein bottle. Moreover, in three dimensions, there are 10 finite closed flat 3manifolds, of which 6 are orientable and 4 are nonorientable. The most familiar is the aforementioned 3Torus universe.
In the absence of dark energy, a flat universe expands forever but at a continually decelerating rate, with expansion asymptotically approaching zero. With dark energy, the expansion rate of the universe initially slows down, due to the effect of gravity, but eventually increases. The ultimate fate of the universe is the same as that of an open universe.
A flat universe can have zero total energy.
Universe with positive curvature
A positively curved universe is described by spherical geometry, and can be thought of as a threedimensional hypersphere, or some other spherical 3manifold (such as the Poincaré dodecahedral space), all of which are quotients of the 3sphere.
Poincaré dodecahedral space, a positively curved space, colloquially described as "soccerballshaped", as it is the quotient of the 3sphere by the binary icosahedral group, which is very close to icosahedral symmetry, the symmetry of a soccer ball. This was proposed by JeanPierre Luminet and colleagues in 2003^{[7]}^{[16]} and an optimal orientation on the sky for the model was estimated in 2008.^{[8]}
Universe with negative curvature
A hyperbolic universe, one of a negative spatial curvature, is described by hyperbolic geometry, and can be thought of locally as a threedimensional analog of an infinitely extended saddle shape. There are a great variety of hyperbolic 3manifolds, and their classification is not completely understood. For hyperbolic local geometry, many of the possible threedimensional spaces are informally called horn topologies, so called because of the shape of the pseudosphere, a canonical model of hyperbolic geometry. An example is the Picard horn, a negatively curved space, colloquially described as "funnelshaped".^{[9]}
Curvature: Open or closed
When cosmologists speak of the universe as being "open" or "closed", they most commonly are referring to whether the curvature is negative or positive. These meanings of open and closed are different from the mathematical meaning of open and closed used for sets in topological spaces and for the mathematical meaning of open and closed manifolds, which gives rise to ambiguity and confusion. In mathematics, there are definitions for a closed manifold (i.e., compact without boundary) and open manifold (i.e., one that is not compact and without boundary). A "closed universe" is necessarily a closed manifold. An "open universe" can be either a closed or open manifold. For example, the Friedmann–Lemaître–Robertson–Walker (FLRW) model the universe is considered to be without boundaries, in which case "compact universe" could describe a universe that is a closed manifold.
Milne model ("spherical" expanding)
Universe in an expanding sphere. The galaxies farthest away are moving fastest and hence experience length contraction and so become smaller to an
observer in the centre.
If one applies Minkowski spacebased Special Relativity to expansion of the universe, without resorting to the concept of a curved spacetime, then one obtains the Milne model. Any spatial section of the universe of a constant age (the proper time elapsed from the Big Bang) will have a negative curvature; this is merely a pseudoEuclidean geometric fact analogous to one that concentric spheres in the flat Euclidean space are nevertheless curved. Spacial geometry of this model is an unbounded hyperbolic space. The entire universe is contained within a light cone, namely the future cone of the Big Bang. For any given moment t > 0 of coordinate time (assuming the Big Bang has t = 0), the entire universe is bounded by a sphere of radius exactly c t. The apparent paradox of an infinite universe contained within a sphere is explained with length contraction: the galaxies farther away, which are travelling away from the observer the fastest, will appear thinner.
This model is essentially a degenerate FLRW for Ω = 0. It is incompatible with observations that definitely rule out such a large negative spatial curvature. However, as a background in which gravitational fields (or gravitons) can operate, due to diffeomorphism invariance, the space on the macroscopic scale, is equivalent to any other (open) solution of Einstein's field equations.
See also
References

^ Tegmark, Max (2014). Our Mathematical Universe: My Quest for the Ultimate Nature of Reality (1 ed.). Knopf.

^ ^{a} ^{b} G. F. R. Ellis; H. van Elst (1999). "Cosmological models (Cargèse lectures 1998)". In Marc LachièzeRey. Theoretical and Observational Cosmology. NATO Science Series C 541. p. 22.

^ "Will the Universe expand forever?". NASA. 24 January 2014. Retrieved 16 March 2015.

^ "Our universe is Flat". FermiLab/SLAC. 7 April 2015.

^ Marcus Y. Yoo (2011). "Unexpected connections". Engineering & Science (

^ Demianski, Marek; Sánchez, Norma; Parijskij, Yuri N. (2003). "Topology of the universe and the cosmic microwave background radiation". The Early Universe and the Cosmic Microwave Background: Theory and Observations. Proceedings of the NATO Advanced Study Institute. The early universe and the cosmic microwave background: theory and observations (Springer) 130: 161.

^ ^{a} ^{b}

^ ^{a} ^{b} Roukema, Boudewijn; Zbigniew Buliński; Agnieszka Szaniewska; Nicolas E. Gaudin (2008). "A test of the Poincare dodecahedral space topology hypothesis with the WMAP CMB data". Astronomy and Astrophysics 482 (3): 747.

^ ^{a} ^{b} Aurich, Ralf; Lustig, S.; Steiner, F.; Then, H. (2004). "Hyperbolic Universes with a Horned Topology and the CMB Anisotropy".

^ "Density Parameter, Omega". hyperphysics.phyastr.gsu.edu. Retrieved 20150601.

^ Ade, P. A. R.; Aghanim, N.; ArmitageCaplan, C.; Arnaud, M.; Ashdown, M.; AtrioBarandela, F.; Aumont, J.; Baccigalupi, C.; Banday, A. J.; Barreiro, R. B.; Bartlett, J. G.; Battaner, E.; Benabed, K.; Benoît, A.; BenoitLévy, A.; Bernard, J.P.; Bersanelli, M.; Bielewicz, P.; Bobin, J.; Bock, J. J.; Bonaldi, A.; Bond, J. R.; Borrill, J.; Bouchet, F. R.; Bridges, M.; Bucher, M.; Burigana, C.; Butler, R. C.; Calabrese, E.; et al. (2014). "Planck2013 results. XVI. Cosmological parameters". Astronomy & Astrophysics 571: A16.

^ De Bernardis, P.; Ade, P. A. R.; Bock, J. J.; Bond, J. R.; Borrill, J.; Boscaleri, A.; Coble, K.; Crill, B. P.; De Gasperis, G.; Farese, P. C.; Ferreira, P. G.; Ganga, K.; Giacometti, M.; Hivon, E.; Hristov, V. V.; Iacoangeli, A.; Jaffe, A. H.; Lange, A. E.; Martinis, L.; Masi, S.; Mason, P. V.; Mauskopf, P. D.; Melchiorri, A.; Miglio, L.; Montroy, T.; Netterfield, C. B.; Pascale, E.; Piacentini, F.; Pogosyan, D.; et al. (2000). "A flat Universe from highresolution maps of the cosmic microwave background radiation". Nature 404 (6781): 955–9.

^ ^{a} ^{b}

^ Vardanyan, Mihran; Trotta, Roberto; Silk, Joseph (2009). "How flat can you get? A model comparison perspective on the curvature of the Universe". Monthly Notices of the Royal Astronomical Society 397: 431.

^ Planck Collaboration; Ade, P. A. R.; Aghanim, N.; Arnaud, M.; Ashdown, M.; Aumont, J.; Baccigalupi, C.; Banday, A. J.; Barreiro, R. B.; Bartlett, J. G.; Bartolo, N.; Battaner, E.; Battye, R.; Benabed, K.; Benoit, A.; BenoitLevy, A.; Bernard, J.P.; Bersanelli, M.; Bielewicz, P.; Bonaldi, A.; Bonavera, L.; Bond, J. R.; Borrill, J.; Bouchet, F. R.; Boulanger, F.; Bucher, M.; Burigana, C.; Butler, R. C.; Calabrese, E.; et al. (2015). "Planck 2015 results. XIII. Cosmological parameters".

^ "Is the universe a dodecahedron?", article at PhysicsWeb.
External links

How do we know that the universe is flat A video explains how astrophysicists measure the geometry of the universe at Physicsworld.com

Geometry of the Universe

“The topology of the universe: the biggest manifold of them all”

"Cosmic Topologies"

Universe is Finite, "Soccer Ball"Shaped, Study Hints. Possible wraparound dodecahedral shape of the universe

Classification of possible universes in the LambdaCDM model.

Fagundes, Helio V. (2002). "Exploring the global topology of the universe". Brazilian Journal of Physics 32 (4).

Grime, James. (Pi and the size of the Universe)"_{39}π". Numberphile.

What do you mean the universe is flat? Scientific American Blog explanation of a flat universe and the curved spacetime in the universe.
This article was sourced from Creative Commons AttributionShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, EGovernment Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a nonprofit organization.