World Library  
Flag as Inappropriate
Email this Article


Article Id: WHEBN0002064061
Reproduction Date:

Title: Shikomizue  
Author: World Heritage Encyclopedia
Language: English
Subject: Ninja, Types of swords, Joto, Gun Frontier, List of fictional swords
Publisher: World Heritage Encyclopedia


Japanese sword mountings are the various housings and associated fittings (tosogu)[1] that hold the blade of a Japanese sword when it is being worn or stored. Koshirae (拵え?) refers to the ornate mountings of a Japanese sword (e.g. katana), koshirae are used when the sword blade is being worn by its owner, whereas the shirasaya is a plain undecorated wooden mounting composed of a saya and tsuka that the sword blade is stored in when not being used.


  • Fuchi (?):The fuchi is a hilt collar between the tsuka and the tsuba.
  • Habaki (?):The habaki is a wedge shaped metal collar used to keep the sword from falling out of the saya and to support the fittings below; fitted at the ha-machi and mune-machi which precede the nakago.
  • Kaeshizuno (返し角?) - a hook shaped fitting used to lock the saya to the obi while drawing.
  • Kashira (?):The kashira is a butt cap (or pommel) on the end of the tsuka.
  • Kōgai (?):The kōgai is a spike for hair arranging carried sometimes as part of Katana-Koshirae in another pocket.
  • Koiguchi (鯉口?):The koiguchi is the mouth of the saya or its fitting; traditionally made of buffalo horn.
  • Kojiri (?):The kojiri is the end of the saya or the protective fitting at the end of the saya; also traditionally made of buffalo horn.
  • Kozuka (小柄?):The kozuka is a decorative handle fitting for the kogatana; a small utility knife fit into a pocket on the saya.
  • Kuri-kata (栗形?):The kuri-kata is a knob on the side of the saya for attaching the sageo.
  • Mekugi (目釘?):The mekugi is a small peg for securing the tsuka to the nakago.
  • Menuki (目貫?):The menuki are ornaments on the tsuka (generally under the tsuka-ito); to fit into the palm for grip and originally meant to hide the mekugi.
  • Mekugi-ana (茎穴?):The mekugi-ana are the holes in the tsuka and nakago for the mekugi.
  • Sageo (下げ緒?):The sageo is the cord used to tie saya to the belt/obi when worn.
  • Same-hada (鮫肌?) - literally the pattern of the ray skin.
  • Same-kawa (samegawa) (鮫皮?):same-kawa is the ray or shark skin wrapping of the tsuka (handle/hilt).
  • Saya (?):The saya is a wooden scabbard for the blade; traditionally done in lacquered wood.
  • Seppa (切羽?):The seppa are washers above and below the tsuba to tighten the fittings.
  • Shitodome (鵐目?) - an accent on the kurikata for aesthetic purposes; often done in gold-ish metal in modern reproductions.
  • Tsuba (鍔 or 鐔?):The tsuba is a hand guard.
  • Tsuka (?):The tsuka is the hilt or handle; made of wood and wrapped in samegawa.
  • Tsuka-maki (柄巻?) - the art of wrapping the tsuka, including the most common hineri maki and katate maki (battle wrap).
  • Tsuka-ito (柄糸?):Tsuka-ito the wrap of the tsuka, traditionally silk but today most often in cotton and sometimes leather.
  • Wari-bashi (割箸?) - metal chop-sticks fit in a pocket on the saya.


A shirasaya (白鞘?), literally "white scabbard",[2] is a plain wooden Japanese blade mount consisting of a saya (scabbard) and tsuka (hilt), traditional made of nurizaya wood and used when a blade was not expected to see use for some time and needed to be stored. They were externally featureless save for the needed mekugi-ana[3] to secure the nakago (tang), though sometimes sayagaki (blade information) was also present. The need for specialized storage is because prolonged koshirae mounting harmed the blade, owing to factors such as the lacquered wood retaining moisture and encouraging corrosion.

Such mountings are not intended for actual combat, as the lack of a tsuba (guard) and proper handle wrappings were deleterious; as such they would likely never make their way onto a battlefield. However, there have been loosely similar "hidden" mountings, such as the shikomizue. Also, many blades dating back to earlier Japanese history are today sold in such a format, along with modern-day reproductions; while most are purely decorative replicas, a few have functional blades.[4]

Shirasaya gallery


The word koshirae is derived from the verb koshiraeru (拵える?), which is no longer used in current speech. More commonly "tsukuru" is used in its place with both words meaning to "make, create, manufacture." A more accurate word is tōsō (刀装?), meaning sword-furniture, where tōsōgu (刀装具?) are the parts of the mounting in general, and "kanagu" stands for those made of metal. Gaisō (外装?) are the "outer" mountings, as opposed to tōshin (刀身?), the "body" of the sword.

A koshirae should be presented with the tsuka (hilt) to the left, particularly in times of peace with the reason being that you cannot unsheathe the sword easily this way. During the Edo period, many formalized rules were put into place: in times of war the tsuka should be presented to the right allowing the sword to be readily unsheathed.

Koshirae were meant not only for functional but also for aesthetic purposes, often using a family mon (crest) for identification.

Types of koshirae

  • Tachi

The tachi style koshirae is the primary style of mounting used for the tachi, where the sword is suspended edge-down from two hangers (ashi) attached to the obi.[5] The hilt (tsuka) often had a slightly stronger curvature than the blade, continuing the classic tachi increase in curvature as you go from the tip to the hilt. The hilt was usually secured with two pegs (mekugi), as compared to one peg for shorter blades including uchigatana and katana. The tachi style koshirae preceded the uchigatana (katana) style koshirae.

  • Uchigatana (katana)

The uchigatana style koshirae is the most commonly known koshirae and it is what most people associate with a samurai sword. Swords mounted in this style of koshirae are worn with the cutting edge up as opposed to the tachi style koshirae were the sword is worn with the cutting edge down.

  • Han-dachi (half tachi)

The han-dachi koshirae was worn katana style but included some tachi related fittings such as a kabuto-gane instead of a kashira.

  • Aikuchi

The aikuchi (匕首?) (literally "fitting mouth") is a form of mounting for small Japanese swords in which the handle and the scabbard meet without a guard (tsuba) in between.[6] Originally used on the koshigatana (a precursor to the wakizashi) to facilitate close wearing with armor,[7][8] it became a fashionable upper-class mounting style for tantō (daggers) from the Kamakura period onwards.

According to S. Alexander Takeuchi from University of North Alabama, Department of Sociology, aikuchi, is a form of koshirae (mounting style) which commonly was used in tantō creation. The nomenclature of the word "aikuchi" is the following: the Japanese: ai is a gerund which means meeting and Japanese: kuchi is a noun that means mouth. The same formula is used in koi-guchi. So, aikuchi initially was a style of mounting in which the fuchi meets with the koi-guchi.

  • Shikomizue

The shikomizue (仕込み杖?, literally "prepared cane") or 'jotō' (杖刀 literally "staff sword") [9] is a Japanese swordstick. It is most famous for its use by the fictional swordmaster Zatoichi.

The name shikomi-zue is actually the name of a type of mounting; the sword blade was placed in a cane-like mounting (tsue), to conceal the fact that it was a sword. These mountings are not to be confused with the Shirasaya mountings, which were just plain wooden mountings with no decorations.

Some shikomi-zue also concealed metsubushi, chains, hooks, and many other things. The shikomi-zue could be carried in public without arousing suspicion, making them perfect tools for shinobi.

  • Kaiken

The aikuchi tantō known as kaiken is a small 8-10 inch long, single or double bladed dagger[10] without ornamental fittings housed in a plain mount, formerly carried by men and women of the samurai class in Japan. It was useful for self-defense indoors where the long katana and intermediate wakizashi were inconvenient. Women carried them in their kimono either in a pocket like fold (futukoro) or in the sleeve (tamoto).[11] for self-defense for suicide by means of slashing the veins in the left side of the neck (carotid artery).[12][13]

Koshirae gallery

Parts of the koshirae


Saya (?) is the Japanese term for a scabbard, and specifically refers to the scabbard for a sword or knife. The saya of a koshirae are normally manufactured from very lightweight wood, with a coat of lacquer on the exterior. The wood is light enough that great care must be taken when drawing the sword; incorrect form may result in the blade of the sword slicing through the saya and severing one or more fingers. Correct drawing and sheathing of the blade involves contacting the mune rather than ha to the inside of the saya. The saya also has a wooden knob (栗形 kurigata?) on one side for attaching a braided cord (sageo), and may have a shitodome to accent the kurigata as well as a butt cap (小尻 kojiri?) made from metal. Traditionally the koiguchi and kojiri were made from buffalo horn.

Parts of the saya
  • Sageo

A sageo (下緒 or 下げ緒?) is a hanging cord made of silk, cotton or leather that is passed through the hole in the kurigata (栗形) of a Japanese sword's saya. There are a number of different methods for wrapping and tying the sageo on the saya for display purposes. In some schools of Iaidō, the sageo is tied to the hakama when practicing.[14]

  • Kuri-kata

The kurikata is a knob that is attached to the saya (scabbard) of a Japanese sword. The sageo (cord) that secures the saya of the sword to the obi (belt) goes through a hole in the kurikata. File:Masaharu - Kurikata with Plum Blossoms - Walters 51915.jpg

  • Kojiri

The kojiri is the end cap of the saya or the protective fitting at the end of the saya.

  • Kogatana and kozuka

Kogatana, a small utility knife that fits into a pocket on the saya, the kozuka is the decorative handle for the kogatana.

  • kōgai

The kōgai is a spike for hair arranging that fits into a pocket on the saya.

  • Umabari

The umabari is a small knife that is a variation of the kogatana, it fits into a pocket on the saya.


The tsuka is the hilt or handle of a Japanese sword.

Parts of the tsuka
  • Menuki

The menuki are ornaments on the tsuka (generally under the tsuka-ito); to fit into the palm for grip.

  • Samegawa (samekawa or same')

Samegawa is the ray skin used to cover or wrap the tsuka (hilt ot handle) of a Japanese sword.

  • Tsuka-ito

Tsuka-ito the wrap of the tsuka, traditionally silk but today most often in cotton and sometimes leather.

  • Fuchi

Fuchi, a cap type collar or ferrule which covers the opening in the handle tsuka of a Japanese sword. The tang nakago of the sword goes into the handle through a hole in the fuchi.

  • Kashira

The kashira is a butt cap (or pommel) on the end of the tsuka.


The tsuba (?, or ) is usually a round or occasionally squarish guard at the end of the grip of bladed Japanese weapons, like the katana and its various declinations, tachi, wakizashi, tantō, naginata etc. They contribute to the balance of the weapon and to the protection of the hand. The tsuba was mostly meant to be used to prevent the hand from sliding onto the blade during thrusts as opposed to protecting from an opponent's blade. The chudan no kamae guard [15] is determined by the tsuba and the curvature of the blade. The diameter of the average katana tsuba is 7.5–8 centimetres (3.0–3.1 in), wakizashi tsuba is 6.2–6.6 cm (2.4–2.6 in), and tantō tsuba is 4.5–6 cm (1.8–2.4 in).

During the Muromachi period (1333–1573) and the Momoyama period (1573–1603) Tsuba were more for functionality than for decoration, being made of stronger metals and designs. During the Edo period (1603–1868) there was peace in Japan so tsuba became more ornamental and made of less practical metals such as gold.

Tsuba are usually finely decorated, and nowadays are collectors' items. Tsuba were made by whole dynasties of craftsmen whose only craft was making tsuba. They were usually lavishly decorated. In addition to being collectors items, they were often used as heirlooms, passed from one generation to the next. Japanese families with samurai roots sometimes have their family crest (mon) crafted onto a tsuba. Tsuba can be found in a variety of metals and alloys, including iron, steel, brass, copper and shakudo. In a duel, two participants may lock their katana together at the point of the tsuba and push, trying to gain a better position from which to strike the other down. This is known as tsubazeriai (鍔迫り合い), lit. pushing tsuba against each other. Tsubazeriai is a common sight in modern kendo.

In modern Japanese, tsubazeriai (鍔迫り合い) has also come to mean "to be in fierce competition."


The seppa are washers used in front and behind the tsuba to tighten the fittings, seppa can be ornate or plain.


The habaki (啖呵?) is a piece of metal encircling the base of the blade of a Japanese bladed weapon. It has the double purpose of locking the tsuba (guard) in place, and to maintain the weapon in its saya (scabbard).

A katana, a type of Japanese longsword, is drawn by grasping the saya near the top and pressing the tsuba with the thumb to emerge the blade just enough to unwedge the habaki from inside the saya in a process called "koiguchi-no-kirikata". The blade is then free in the saya, and can be drawn out very quickly. This is known as "Koiguchi-o kiru", nukitsuke, or "tanka o kiru" (啖呵を切る, "clearing the tanka"). This is obviously an extremely aggressive gesture, since a fatal cut can be given in a fraction of a second thereafter (see iaidō). It is similar in connotation and effect as drawing back the hammer of a handgun, chambering a round on a pump-action shotgun, or pulling back and releasing the charging handle on other firearms.

The expression "tanka o kiru" is now widely used in Japan, in the sense of "getting ready to begin something", or "getting ready to speak", especially with an aggressive connotation.[16]

The habaki will cause normal wear and tear on the koiguchi and either a shim or new saya may be needed to remedy the issue as it will become too loose over time. Oiling under the habaki after cutting or once every few months is recommended by removing the habaki from the sword, though.

See also



Further reading

  • The Craft of the Japanese Sword, Leon and Hiroko Kapp, Yoshindo Yoshihara ; Kodansha International; ISBN 0-87011-798-X
  • The Samurai Sword: A Handbook, John M. Yumoto ; Charles E. Tuttle Company; ISBN 0-8048-0509-1
  • The Japanese Sword, Kanzan Sato ; Kodansha International; ISBN 0-87011-562-6
  • Japanese Swords, Nobuo Ogasawara ; Hoikusha Publishing Co, Ltd. ISBN 4-586-54022-2

External links

  • History of the Development of Koshirae
  • Nihonto Antiques - Step by step guide to tying a Sageo (photos).
  • Usagiya Sword Shop - Step by step guide to tying a Sageo (photos).

Template:Japanese (samurai) weapons, armour and equipment

This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from World eBook Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.